Life Fitness Rear-Drive Cross-Trainer دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Life Fitness Rear-Drive Cross-Trainers
How To… Install the Clevis Repair Kit
Service Tools Require: Phillips Screwdriver, Wire Brush & Two 9/16” Wrenches
Service Kit: GK61-00002-0046
1. Remove the FRONT and REAR PLASTIC CLEVIS COVERS from one
CLEVIS JOINT. Discard the SCREWS.
2. Pad the FRONT STABILIZER TUBE to prevent it and the PEDAL
LEVER from getting scratched when the PEDAL LEVER is disconnected
and lowered.
3. Remove the BOLT and NUT securing the PEDAL LEVER and ROCKER
ARM. Lower the PEDAL

ملخص المحتوى في الصفحة رقم 2

Life Fitness Rear-Drive Cross-Trainers How To… Install the Clevis Repair Kit (Continued) Service Tools Require: Phillips Screwdriver, Wire Brush & Two 9/16” Wrenches Service Kit: GK61-00002-0046 O-Ring Pedal Lever Pedal Lever O-Ring 9. Install the new SHAFT provided into the PEDAL LEVER BUSHINGS. 10. Install the new RUBBER O-RINGS onto the shoulder of the BUSHINGS. Shaft Bushing Bushing Shaft DE Delrin Washer LRIN Washer 11. Insert the beveled edge of the DELRIN WASHER over the BUSHING and O-R O