Vinothèque Extreme 4000 Duct Kit دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Extreme 4000 Duct Kit
by Vinothèque and WhisperKOOL®
“Protecting Your Investment in Fine Wines”

ملخص المحتوى في الصفحة رقم 2

ملخص المحتوى في الصفحة رقم 3

Extreme Duct Kit Parts List DuctingAdapter x  or 2 5 inches 5 inches 54 inches 

ملخص المحتوى في الصفحة رقم 4

Installation Step : Remove the grill from the unit by unscrewing the four screws that hold it in place. Step 2: Move the Ducting Adapter into place 2

ملخص المحتوى في الصفحة رقم 5

Installation Step : Screw the Duct Kit into place using the same screws that held the grill in place. 

ملخص المحتوى في الصفحة رقم 6

Ducted Installation Use ductwork to connect the unit to the supply and return outlets in the wine cellar. Use only insulated ductwork to minimize cooling losses, prevent sweating, and reduce noise. Use ductwork on the condenser section to redirect or absorb sound, bring in outside air to the unit inlet, and/or exhaust the hot air out of the ambient space. Note: Do not exceed a total of 25’ for each length of ductwork run and a total of 50’ combined for both the supply and return leng

ملخص المحتوى في الصفحة رقم 7

Using Ductwork Cold Air to/from Wine Cellar Remove supply air grille to install ductwork between WhisperKOOL Extreme unit and the cellar. Connect the supply air ductwork from the cellar to the supply air outlet adapter flange at the WhisperKOOL Extreme unit. Connect the return air ductwork from the cellar to the return air inlet adapter flange at the WhisperKOOL Extreme unit. Warm Air to/from Wine Cellar Connect ductwork on the condenser to direct heat and air noise away fr

ملخص المحتوى في الصفحة رقم 8

Standard Ducted Installation Dual Outlet Duct Outside through the Wall 25

ملخص المحتوى في الصفحة رقم 9

Remote Mount on Floor Outside Remote Mount 26

ملخص المحتوى في الصفحة رقم 10

Attic Mounted System

ملخص المحتوى في الصفحة رقم 11

WhisperKOOL®