ملخص المحتوى في الصفحة رقم 1
601RG
Planning Information
Built-In Model 601RG
All Refrigerator with Glass Door
Lighted electronic Serial and model
control panel number plate
Triple-pane
UV resistant low-
energy glass door
Adjustable spill-proof
glass shelves
Model 601RG/F
Framed
Egg container
Four-sided
magnetic gaskets
High humidity Door closers
compartment
Model 601RG/O
Overlay
Hermetically sealed
refrigeration units
Front venting allows unit
to be completely built in
Removable kickplate
(Stainless steel design shown)
Mode
ملخص المحتوى في الصفحة رقم 2
Planning Information Built-In Model 601RG FEATURES 36" (914) wide all refrigerator with glass High-humidity crisper drawer is large and door deep with removable divider and smooth sides for easy cleaning Energy Star qualified Door alarm will let you know with an audible Sub-Zero's refrigeration system ensures the beeping if your refrigerator door is left ajar freshest food and energy efficiency Triple-pane UV-resistant low-energy glass Shallow-depth design means access is easy door improves insu
ملخص المحتوى في الصفحة رقم 3
Planning Information Built-In Model 601RG SPECIFICATIONS Model 601RG All Refrigerator with Glass Door Overall Width 36" (914) Overall Height 73" (1854) MODEL OPTIONS Overall Depth 24" (610) Framed Design 601RG/F Refrigerator Capacity 20.1 cu ft (569 L) Overlay Design 601RG/O 3 Minimum Height (levelers in) 72 /4" (1848) Classic Stainless Steel 601RG/S 1 Door Swing Clearance 36 /16" (916) Platinum Stainless Steel 601RG/P Electrical Requirements 115 V AC, 60 Hz, 15 amp circuit Carbon Stainless Stee
ملخص المحتوى في الصفحة رقم 4
Planning Information Built-In Model 601RG INSTALLATION SPECIFICATIONS 24" (610) ROUGH OPENING DEPTH TOP VIEW 1 35 /2" (902) ROUGH OPENING WIDTH 3 72 /4" (1848) ROUGH OPENING HEIGHT LOCATE ELECTRICAL WITHIN SHADED AREA 24" 6" (610) (152) E 11" (279) FRONT VIEW DIMENSIONS 1 Finished Rough Opening Width 35 /2" (902) 3 Finished Rough Opening Height 72 /4" (1848) Finished Rough Opening Depth 24" (610) Location of Electrical Within shaded area See Installation Instructions shipped with unit for detail
ملخص المحتوى في الصفحة رقم 5
Planning Information Built-In Model 601RG INSTALLATION NOTES Refer to the illustrations and specifications The refrigerator door panel must include a for overall dimensions, finished rough opening cut-out to accommodate the window. Refer to dimensions and installation specifics. the panel specifications for exact dimensions. The glass portion of the door must be exposed Allow the door to open a minimum of 90˚ or and not covered by any part of the panel. you'll have problems removing drawers. Wit
ملخص المحتوى في الصفحة رقم 6
Planning Information Built-In Model 601RG ADDING PANELS In your plan for panels, be sure you are working with the Sub-Zero panel design family called for in your design. If you have chosen the stainless steel design, the unit will be shipped complete with wrapped stainless steel doors and handle hardware. You will not have to install front door panels. If you and your client have ordered a framed or overlay design model, you will be adding panels to give the unit the custom Sub-Zero look. Specif
ملخص المحتوى في الصفحة رقم 7
Planning Information Built-In Model 601RG FRAMED PANELS 1 If the thickness of the custom panels is less than /4" (6), they must be backed up with a sheet of shim material 1 to build the total thickness to /4" (6). If the panel is thicker 1 than /4" (6), an edge must be routed around the panel to ensure a proper fit. Refer to the illustrations on this page. FRAMED PANELS IMPORTANT NOTE: Routing, recessing or optional extended handles may be required on raised panels for 1 PANELS /4" (6) THICK OR
ملخص المحتوى في الصفحة رقم 8
Planning Information Built-In Model 601RG OVERLAY PANELS The overlay design allows decorative panels to cover the door trim for a more seamless appearance that blends with the design of the room. To achieve this look, the most common way is to work with three panels—the 1 decorative overlay panel, a .10" (3) spacer panel and a /4" OVERLAY PANELS (6) backer panel. Depending on your cabinet manufacturer, this could be one panel routed for different dimensions or more likely, three different panels
ملخص المحتوى في الصفحة رقم 9
Planning Information Built-In Model 601RG OVERLAY PANELS The refrigerator door panel must include a cut-out to accommodate the window. Refer to the chart below for exact dimensions. The glass portion of the door must be exposed and not covered by any part of the panel. A OVERLAY PANEL DIMENSIONS A A WIDTH HEIGHT 7 1 Door Panel 34 /16" (875) 59 /4" (1505) 1 5 H Door Spacer 33 /2" (851) 58 /16" (1481) 1 15 Door Backer 34 /8" (867) 58 /16" (1497) 7 1 Window Cut-Out 25 /16" (646) 41 /4" (1048) 1 13
ملخص المحتوى في الصفحة رقم 10
Planning Information Built-In Model 601RG SIDE PANELS Side panels can be used with the framed, overlay and stainless steel design applications. When planning for side panels with the installation of the Built-In model, you need to be aware of space configuration to achieve a pleasing fit. Depending on the exact panel you are using with your SIDE PANELS unit, the height of the panel will vary. Cut-outs around the toe kick and grille area are required if 1 a /4" (6) thick panel will be inserted in
ملخص المحتوى في الصفحة رقم 11
Planning Information Built-In Model 601RG HANDLE PROFILE – FRAMED APPLICATION OPTIONAL EXTENDED FULL-LENGTH HANDLE 1" 2" 3" (25) (51) (76) 1 1 /4"(32) PANEL STANDARD FULL-LENGTH 1"(25) PANEL HANDLE 3 /4"(19) PANEL 1 /2"(13) PANEL 1 /4"(6) PANEL 1 /4"(6) FRAMED PANEL DOOR FULL-SCALE TEMPLATES HANDLE PROFILE The following full-scale illustrations enable you The full-scale illustration above shows handle to understand some of the unique situations placement for the framed application standard yo
ملخص المحتوى في الصفحة رقم 12
Planning Information Built-In Model 601RG HANDLE PROFILE – STAINLESS STEEL / OVERLAY APPLICATIONS STANDARD STAINLESS STEEL HANDLE 2" 3" 1" (51) (76) 1 1 /4" (32) PANEL 1" (25) PANEL 3 /4" (19) PANEL 5 /8" (16) PANEL 1 /2" (13) PANEL 1 /4" (6) PANEL 1 /4" (6) APPROXIMATE THICKNESS OF WRAPPED STAINLESS STEEL DOOR DOOR NOTE: FOR OVERLAY APPLICATIONS, OPTIONAL STAINLESS STEEL HANDLE MUST BE MOUNTED ON PANEL MINIMUM 5/8" (16) THICK. PANEL AND HANDLE PROFILE The full-scale illustration above shows ha
ملخص المحتوى في الصفحة رقم 13
Planning Information Built-In Model 601RG PANEL AND HANDLE PROFILE – 130˚ DOOR OPENING 130˚ DOOR OPENING SUB-ZERO UNIT WITH 2" (51) FILLER STRIP SUB-ZERO UNIT (TOP VIEW) FILLER STRIP 2" (51) ALLOW FOR FILLER LAP BEHIND FLANGE DOOR CLOSED OVERLAY PANEL MAIN FRAME 3/4" (19) THICK (NOMINAL) HINGE APPROX PROFILE OF STAINLESS STEEL DOOR STANDARD AND HANDLE FRAMED FULL-LENGTH HANDLE DOOR OPEN @ 130˚ OPTIONAL FRAMED EXTENDED FULL-LENGTH HANDLE The full-scale illustration above shows the panel To ob
ملخص المحتوى في الصفحة رقم 14
Planning Information Built-In Model 601RG OVERLAY PANEL APPLICATION – 90˚ DOOR OPENING 90˚ DOOR OPENING NOMINAL OVERALL WIDTH OF SUB-ZERO (TOP VIEW) SUB-ZERO UNIT 7 23 /8" (606) TO REAR OF SUB-ZERO MAIN FRAME 0" (0) 1 /4" (6) DOOR CLOSED 1 /2" (25) 3 /4" (19) HINGE 1" (25) 1 1 /4" (32) 1 1 /2" (38) 3 1 /4" (44) 2" (51) 1 2 /4" (57) 1 2 /2" (63) DOOR OPEN @ 90˚ 3 2 /4" (70) 3" (76) 1 3 /4" (83) 1 3 /2" (89) OVERLAY PANEL 3/4" (19) THICK (NOMINAL) *Approximate thickness of wrapped stainless stee
