ملخص المحتوى في الصفحة رقم 1
COMPACT DISC PLAYER
CDJ-1000MK2
Operating Instructions
ملخص المحتوى في الصفحة رقم 2
NOTE: THE NO USER-SERVICEABLE PARTS COMPARTMENT WARNING IS LOCATED ON THE APPLIANCE BOTTOM. 2 En
ملخص المحتوى في الصفحة رقم 3
[For U.S. model] IMPORTANT NOTICE H006AEn The serial number for this equipment is located in the rear panel. Please write this serial number on your enclosed warranty card and keep it in a secure area. This is for your security. WARNING: Handling the cord on this product or cords associated with accessories sold with the product will expose you to lead, a chemical known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash h
ملخص المحتوى في الصفحة رقم 4
BEFORE OPERATIONS Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them CAUTIONS REGARDING HANDLING away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may Location sometimes differ from that shown in the explanatory drawings. However the method Install the player in a well-ventilate
ملخص المحتوى في الصفحة رقم 5
BEFORE OPERATIONS: CAUTIONS REGARDING HANDLING FORCED DISC EJECTION Storing discs If the eject button does not function or the disc cannot be removed, pushing the pin ÷ Discs are made of the same kinds of plastic used for conventional analog au- provided into the forced ejection hole on the front panel will enable the disc to be dio records. Be careful not to allow discs to warp. Always store discs in their removed. cases vertically, avoiding locations with high heat, humidity, or extremely low
ملخص المحتوى في الصفحة رقم 6
BEFORE OPERATIONS FEATURES The CDJ-1000MK2 compact disc player is designed for use by DJs providing all the CUE functions and performance required in disco clubs while offering performance, BACK CUE sound quality and functionality superior to any analog player. After storing the Cue point in memory, press the CUE button while playing the unit to go back to the Cue point and start over. JOG DIAL The large 206 mm diameter Jog dial enables better handling than AUTO CUE an analog turntable. Auto cue
ملخص المحتوى في الصفحة رقم 7
BEFORE OPERATIONS CONNECTIONS ÷ Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. 1. Connecting to a DJ mixer (DJM-600, DJM-300, DJM-500, DJM-3000) (sound output and control terminal connection) Use the supplied audio cables. Connect the white plug to the L (left) terminal and the red plug to the R (right) terminal. Connect the supplied control cord to enable control of the unit from the mixer to allow fader start play and back cue.
ملخص المحتوى في الصفحة رقم 8
BEFORE OPERATIONS: CONNECTIONS 3. Connecting to other devices A Connecting to other mixers Connect the AUDIO OUT terminal on the unit with the Line In terminal or AUX terminal on the mixer. (Do not use the Phono terminal. Otherwise the sound will become distorted and prevent normal playback.) B Connecting to a stereo amplifier (when not using a DJ mixer) Connect to the AUX input terminal. Stereo amplifier (Do not use the Phono input terminal.) CDJ-1000MK2 Supplied audio cable C Connecting to a c
ملخص المحتوى في الصفحة رقم 9
BEFORE OPERATIONS Operation buttons marked with the asterisk (*) are disabled PANEL FACILITIES when the DIGITAL OUT mode switch is set to NORMAL. 11 DIGITAL OUT mode switch (DJ/NORMAL) P. 8 Top Panel This switch is located on the unit’s rear panel. When set to DJ, the DIGITAL OUT connector outputs audio data alone. When set to NORMAL, digital data (including sub-codes) is output, but the unit’s DJ functions are not supported (operation buttons marked with the asterisk (*) are disabled). No sou
ملخص المحتوى في الصفحة رقم 10
BEFORE OPERATIONS: PANEL FACILITIES 28 Force Ejection Hole P.5 35 SEARCH button (1, ¡) P.12 29 Memory Card Loading Slot P.16 36 TRACK SEARCH button (4, ¢) P.12 30 Memory Card indicator P.16 37 Reverse indicator (REV) (*) Lights when the MMC card is being accessed. Lights when the DIRECTION FWD/REV switch is set to reverse. ¶ Do not remove the card or turn off the power when this lamp is on. 38 DIRECTION FWD/REV switch (*) 31 Play/Pause indicator Plays tracks backwards when set to the
ملخص المحتوى في الصفحة رقم 11
BASIC OPERATION DISC LOADING/UNLOADING 3. The disc can be ejected anytime using the EJECT button (0) when the EJECT UNLOCK/LOCK switch is set to UNLOCK. When the EJECT UNLOCK/LOCK switch is set to LOCK, Label surface up press the PLAY/PAUSE button (6) during playback, or when a Cue point has been set, press the CUE button (back cue) before pressing the EJECT button (0) to eject the disc. ¶ When the EJECT button is pressed, disc rotation stops and the disc is ejected Insert straight from the loa
ملخص المحتوى في الصفحة رقم 12
BASIC OPERATION: DJ PLAYER OPERATION 3. If auto cueing is off, playback will begin automatically ÷ When you stop turning the Jog dial, the unit returns to playback mode. from the first track. ÷ Release the SEARCH button to exit this mode. ¶ When auto cueing is off, playback will continue after the first track has been played, with all subsequent tracks being played in sequence. LOOP IN/REALTIME CUE VINYL SPEED ¶ When playback of the final track is complete, playback will automatically ADJUST TOU
ملخص المحتوى في الصفحة رقم 13
BASIC OPERATION: DJ PLAYER OPERATION 5. During playback, rotate the Jog dial while holding the [Amending the Cue point] SEARCH button (1, ¡) depressed. (Super-fast 1. During playback, press the CUE button. search) ¶ This will take you back to the set track position. Hold down the button while turning the Jog dial in the direction you wish to 2. In the VINYL mode, to set the Cue point, go through search to enter fast forward or fast reverse mode. steps 2 and 3 as mentioned above. 6. Rotate the Jo
ملخص المحتوى في الصفحة رقم 14
ADVANCED OPERATIONS 7 Fader start play tion, when the CROSS FADER slider is returned to its original position, the Using the cross fader start function of the DJM-600, DJM-500, DJM-300 or status returns to that in step 9 (player CD2 at its Cue point), so that you can DJM-3000, step 10 above can be eliminated for even simpler mixing. In addi- repeat the same play as many times as you like. Functions indicated with an asterisk (*) are disabled when ADVANCED OPERATIONS the rear panel DIGITAL OUT
ملخص المحتوى في الصفحة رقم 15
ADVANCED OPERATIONS 7 Changing the loop out point DISPLAY WAVE SEARCH(ZOOM)2 /CD TEXT DISC 1. Press the LOOP OUT (OUT ADJUST) button in loop play. CD TEXT/WAVE WAVE SEARCH(ZOOM)3 ZOOM ¶ The time of the out point is shown in the display, the LOOP OUT button /CD TEXT TRACK starts to flash rapidly and the LOOP IN/REALTIME CUE button goes off. 2. Press the forward or reverse SEARCH button (1, ¡) or turn the Jog dial. ¶ The loop end point will be shifted forward or backward in 1-frame units. ¶ The
ملخص المحتوى في الصفحة رقم 16
ADVANCED OPERATIONS USING CUE POINTS/LOOP POINTS MEMORY This unit can store Cue points and Loop points for each disc in internal or on a 7 Deleting stored Cue/Loop points Multimedia Card (MMC). When Cue/Loop points are stored, the calendar display and the playback ad- dress display lights in red. 1. Press the CUE/LOOP CALL button. CUE/LOOP MEMORY ¶ When the CALL button (3) is pressed, Cue/Loop points are called in order from the beginning of the disc and the disc is set to standby at the cue or
ملخص المحتوى في الصفحة رقم 17
ADVANCED OPERATIONS: USING CUE POINTS/LOOP POINTS MEMORY 7 Storing CUE points Insert a Multimedia Card in the card insertion slot and perform the same pro- CUE/LOOP cedure as when the internal memory is used. P.16 MEMORY 7 Storing Loop points CUE/LOOP Insert a Multimedia Card in the card insertion slot and perform the same pro- DELETE cedure as when the internal memory is used. P.16 7 Calling stored Cue/Loop points CUE/LOOP Insert a Multimedia Card in the card insertion slot and perform the
ملخص المحتوى في الصفحة رقم 18
OTHERS TROUBLESHOOTING Incorrect operations can be mistaken as malfunctions. If you believe the unit is not operating correctly, consult the chart below. Sometimes incorrect operation may be due to a malfunction in another component. If the problem is not fixed, check the other components used with the player. If the problem still persists, contact your nearest Pioneer authorized service center or dealer for service. Symptom Cause Remedy Disc doesn’t eject even when EJECT button (0) is ÷ Power
ملخص المحتوى في الصفحة رقم 19
OTHERS: TROUBLESHOOTING Error message display When the CDJ-1000MK2 CD player is unable to operate properly, an error code is displayed on the display panel. Check the error code displayed against the follow- ing table and take the recommended action to correct the error. If an error code other than any of the error codes listed in the table below is displayed or if the same error code is displayed even after corrective action has been taken, contact your nearest Pioneer Service Station or contac
ملخص المحتوى في الصفحة رقم 20
OTHERS SPECIFICATIONS 1. General 3. Accessories ÷ Operating instructions ........................................................................................ 1 System ................................................................. Compact disc digital audio system ÷ Power cord ........................................................................................................... 1 Power requirements ........................................................................... AC 120 V, 6
