ملخص المحتوى في الصفحة رقم 1
Premium CD Player
MANUAL
©2002 Industries http://www.numark.com
ملخص المحتوى في الصفحة رقم 2
CDN90 SAFETY INSTRUCTIONS a) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. b) Retain Instructions - The safety and operating instructions should be kept for future reference. c) Heed Warnings - All warnings on this product and in these operating CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK instructions should be followed. DO NOT REMOVE ANY COVER. NO USER- d) Follow Instructions - All operating and other inst
ملخص المحتوى في الصفحة رقم 3
CDN90 For 220-volt use in USA, use NEMA style 220-volt plug. For other countries use proper plug for local outlet. TABLE OF CONTENTS Safety and Warnings (PLEASE READ) 2 Table of Contents 3 Introduction Letter from the Engineers and Registration 4 Setup and Connections 5 Description of the Features Control Unit 6 Main Unit 7 Display 8 Basic Operation Play, Pause, Cue, Pitch, General CD control 9 Advanced Operations Setting Cue Points 10 Pitch Change, Matching Beats 11 B
ملخص المحتوى في الصفحة رقم 4
CDN90 ® PREMIUM CD PLAYER Features: • Dual rack mount CD Player w/ real • 2 seamless loops, 3 hot stutter starts time scratching • Adjustable startup & braking speed • DSP effects, reverse, • MIDI in/out • Beatkeeper™ with auto-mixing • Full Time Digital output capability • fader/remote start & relay • 3,000 cue point and BPM memory • Anti-Shock™ storage • user upgradeable • ±6, 12, 25 & 100% pitch control, • Sleep mode • ±100% KEY LOCK Dear Customer, Tha
ملخص المحتوى في الصفحة رقم 5
CDN90 SETUP & CONNECTIONS Typical connection with a mixer is illustrated below. 1. Mount the units in your console or rack with 19” EIA rails. 2. The transport should be mounted not to exceed an angle of 15 degrees. 3. Your CD player can be affected by excess vibration so mount the units in a secure environment if possible. 4. Connect the supplied Control Cables between the CD Remote and CD Transport unit. Note: Be careful to attach the marked connection jacks together, (yel
ملخص المحتوى في الصفحة رقم 6
CDN90 Control Unit Features 1. PLAY/STUTTER- To start the music from the 14. KEY- Used for various key control. initial cue point. 15. PITCH SLIDER- Controls the overall speed of the 2. PAUSE- To pause the music. music. 3. CUE- To move the music to the cue point and 16. EFFECT BUTTON- Used to determine desired preview the selection. effect. 4. WHEEL- Used for various functions such as 17. EFFECT HOLD- Used to set effects to an alternate cueing, scratching, pitch bend, searching,
ملخص المحتوى في الصفحة رقم 7
CDN90 Main Unit Features the unit will not allow for looping or other effects 25. CD Illumination Light – lights up the CD drawer that would disrupt the video. In this mode, Prog + and CD when open. Cue will turn autocue on and off for video mode 26. CD Drawer – Place your CDs you wish to play in only. This is so that the CDG doesn't skip over the here. This unit is designed to play commercially video frame before the song comes in. When you available CD and properly burned a
ملخص المحتوى في الصفحة رقم 8
CDN90 DISPLAY FEATURES 1. PLAY - Active while the unit is actually playing a 16. TIME MODE (TOTAL) indicates when full CD CD. remain time is showing. 2. PAUSE - Active when the unit is paused. 17. TIME MODE (REMAIN) shows how much time is left on a particular track. 3. CUE - Flashing when the unit is setting a cue point. Active when the unit is paused at a cue 18. TIME BAR - Shows either track time remaining, point. total CD time remaining or track elapsed time depending on t
ملخص المحتوى في الصفحة رقم 9
CDN90 BASIC OPERATIONS Eject: Press to load or eject the disc. The drawer will automatically close to protect the tray from accidental damage while open. NOTE: Tray will not open if the disc is in play. In order to program the automatic close time press and hold followed by . The display will indicate options of 30 seconds, 60 seconds, 120 seconds, and (no) for no auto close. This setting will be remembered at power down. Play/Stutter: Starts the music from either the first
ملخص المحتوى في الصفحة رقم 10
CDN90 SETTING CUE POINTS PLAY and CUE: Pressing the “PLAY” button starts the disc. Pressing the “CUE” button will reset the disc to the last place where the disc was started. This is called the cue point. By alternately pressing the “PLAY” button and the “CUE” button, the disc may be returned and played from the cue point any number of times. This function is called back cue. PLAY, PAUSE and CUE: Pressing “Play” to start then pressing “Pause” and then “Play”
ملخص المحتوى في الصفحة رقم 11
CDN90 ADJUSTING PITCH Pitch Range: actives the pitch slider and adjusts the amount of control the pitch slider has on the overall speed of music. On depression of will toggle the slider on and off. Range adjustments of 6, 12, 25, and 100% can be achieved by holding down and then pressing to cycle through the range options. This setting will be remembered at power down. Pitch Slider: By moving the slider toward the front the speed of the music speeds up. By moving away the sp
ملخص المحتوى في الصفحة رقم 12
CDN90 THE BEATKEEPER™ III and INTERLOCK The CDN90 includes the latest Numark patented Beatkeeper™ technology. The Beatkeeper™ automatically tracks beats based upon a combination of frequencies and rhythm patterns in the music. It shows BPM in the display and outputs 4-count (a.k.a. measure) information about the music in a marching bar graph. Bar Graph: Most dance music and rock is set up in 4 beat increments called measures. Many of the features within the AXIS-8 use this informati
ملخص المحتوى في الصفحة رقم 13
CDN90 KEY LOCK / KEY CHANGE The CDN90 uses Numark exclusive technology to lock the key of the music in place at the current pitch position or change it from the current position. This is different than “master tempo” often found on many modern units because the key lock to the current pitch position and not automatically set to the “0” pitch position. By doing this we have allowed you to activate this function while playing without changing the key. Key Lock: Pressing holds the key
ملخص المحتوى في الصفحة رقم 14
CDN90 LOOPING OPERATIONS LOOPING: A loop is any area of a CD that you choose to repeat with no breaks. On the CDN90 two seamless loops are possible. LOOP IN: The “LOOP IN” point is where you wish for the loop to start. The initial “CUE” point of the CD is also the default “LOOP IN” point for both loops or “Hot Start” point. If you wish to set a new “LOOP IN” point, just press while the CD is playing when it reaches the desired point. The button will light indicatin
ملخص المحتوى في الصفحة رقم 15
CDN90 MOVING LOOP POINTS: The “LOOP IN” point can be moved while the music is playing just by pressing at the new desired point. The next time “LOOP OUT” is reached the CD will return to this new “LOOP IN” point. If “LOOP IN” is press after the “LOOP OUT” point it will clear the “LOOP OUT” point. The “LOOP IN” point can also be edited while paused. First hold down then press to move to the loop in point. Next rotate the wheel to search for a new cue point and then press
ملخص المحتوى في الصفحة رقم 16
CDN90 SPECIAL EFFECTS EFFECT SELECTION (Single Mode): To select and activate an effect tap on it’s button, it will light to indicate activation and effect will indicate in the display. To put the effect into hold mode or active alternate effects press the center button. The button will light indicating the hold has been activated and hold will show in the display. To release any button, tap it once again. EFFECT SELECTION (Multiple Effect Mode): In order to activate/deactivate thi
ملخص المحتوى في الصفحة رقم 17
CDN90 At 1-1 the music will echo 1 full measure or 4 beats of music. If you turn off the effect then back on again it remembers the last set parameter. (Note: a preceding echo requires the unit to play from buffer memory. If the buffer becomes unavailable the effect will stop until buffer is regained.) A.D. (Artificial-Dissemination) – Reduces the bit rate of the music creating increasing distortion with intensity. CHOP – This effect works best when the Beatkeeper™ is properly
ملخص المحتوى في الصفحة رقم 18
CDN90 PROGRAM FUNCTIONS PLEASE READ!!!! This button provides several programmable functions depending upon the combination of buttons used. Track Sequence Programming - Depress while the unit is stopped with a CD in the drawer and “ ” will light. Select each track to be programmed then press between selections. Press “PLAY/STUTTER” to start the track sequence program playing. To exit and erase program hold for more than 2 seconds while the unit is stopped, open the disc tray,
ملخص المحتوى في الصفحة رقم 19
CDN90 CUE/LOOP POINT STORAGE AND RECALL To SAVE Cue and Loop points on the current CD: • CD should still in the drawer with cue and loop points set. • Press + . • Cue points are stored and LCD shows "CUE STORE" for 1 second. • If MIDI OUT goes to another CD player’s MIDI IN, the cue point is stored on the other CD player. To RECALL Cue points on the current CD: • Press + • If CD player is open, it will automatically close and LCD will show "CUE FETCH" to indicate cue poin
ملخص المحتوى في الصفحة رقم 20
CDN90 MIDI IN-OUT MIDI – stands for musical instrument digital interface. Basically this means you can hook up 2 MIDI compatible devices and they will talk to each other. In this case you might connect 2 CDN90s or an AXIS 8 with CDN90 and have them synchronize beats, add a MIDI keyboard and have it control the CD players or hook up a drum machine and play a rhythm pattern in time with the music. GLOBAL MIDI CLOCK TRANSMIT: when the MIDI output of the CDN90 is attached to another clock
