ملخص المحتوى في الصفحة رقم 1
3 DISC AND 1 DISC MD AUTO CHANGER
KMD-D401
INSTRUCTION MANUAL
B64-1955-00 (EN)
ملخص المحتوى في الصفحة رقم 2
Safety precautions Contents 2WARNING Before use Safety Precautions ........................................................................2 To prevent injury or fire, take the following precautions: Operations Buttons and Display ......................................................................5 • Insert the unit all the way in until it is fully MD Changer Play ..........................................................................6 locked in place. Otherwise it may fall out of Plus-one
ملخص المحتوى في الصفحة رقم 3
The marking of products using lasers Cleaning the Unit 2CAUTION (Except for some areas) If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. To prevent damage to the machine, If the faceplate is stained badly, wipe the take the following precautions: CLASS 1 stain off with a cloth moistened with neutral • Make sure to ground the unit to a negative LASER PRODUCT cleaner, then wipe neutral detergent off. 12V DC power supply. • Do not open the top or bott
ملخص المحتوى في الصفحة رقم 4
Safety precautions IMPORTANT INFORMATION This unit is NOT designed to be connected directly to control units that are manufactured and sold before 1994. If used with such units, an optional CA-SD200 (sold separately) must be used. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN DAMAGE TO THIS UNIT AND CONTROL UNIT. • Do not leave the MD in the unit for a Handling Mini discs prolonged period. The ejected MD should be placed in an MD case for storage. • The MD shutter is designed so that it ca
ملخص المحتوى في الصفحة رقم 5
Operations Buttons and Display Release button MENU indicator DEMO indicator 3 MD CHANGER + 1 PLAYER KMD-D401 24BIT ATRAC MENU OPERATION Title display DISP Disc No. indicator DASC DISC indicator 11BAND DIGITAL AUDIO MINI DISC 60 120 250 380 500 750 1k 2k 4k 8k 16k SPECTRUM ANALYZER DISP button MD Slot 01 02 Spectrum analyzer display 03 Opration indicator — 5 — 1 2 3
ملخص المحتوى في الصفحة رقم 6
Operations MD Changer Play Disc No.3 being played:the indicator blinks To set MDs in the main unit: To store an MD: Press one of the 01 - 03 buttons for at least one second. 1 Insert the first MD in the MD slot. The MD currently set in the play position will be stored in the The first MD is set in the play position. stacker position. 2 Insert the second MD in the MD slot. NOTE The second MD is held in the disc No.2 stack position. When an MD has been stored in the stack position, the unit will
ملخص المحتوى في الصفحة رقم 7
Plus-one MD play Switching Spectrum Analyzer Display Even when three MDs have been set in the main unit, a further You can select the display to enjoy sounds with eyes. MD can be played as the plus-one MD. Operation for "N" Setting: To play a plus-one MD (a fourth MD): Each time you press the DISP button, the spectrum analyzer display switches as follows; 1 Press one of the 01 - 03 buttons for at least one second. The MD currently set in the play position will now be stored in Operation for "O"
ملخص المحتوى في الصفحة رقم 8
Operations Menu System Table of Adjustment Mode To accommodate a greater number of functions, a function set Adjustment Operation of Control button system has been employed for making settings. Press the mode DISC+ button DISC- button DISP button to enter the function set mode and then display (Display) the function to make the setting. Selectable 1 Analyzer title (“ANA”) Disc title(“DISC”) Selecting MD play source mode. 1 title* Track title (“TRACK”) (“TITLE”) 2 Press the DISP button for a
ملخص المحتوى في الصفحة رقم 9
Reattaching Faceplate: Theft Deterrent Faceplate Hold the faceplate so that the The faceplate of the unit can be detached and taken with you, operation face faces the front helping to deter theft. toward you and press until it locks. The faceplate will be set Removing Faceplate: and the unit will be operational. Press the release button and drop open the faceplate. NOTE In its dropped condition, whilst drawing the faceplate to one side, pull it to the front and remove it. When there is difficult
ملخص المحتوى في الصفحة رقم 10
Accessories Installation Procedure The O-N switch should be set according to the control unit in External view use as well as to the connected models. ......... Number of items When the centre unit is compatible with the "N"-operation, set the O-N switch to "N". When it is not compatible with the "N"- operation, set the O-N switch to "O" because the operation is 1 not available. The initial setting of the switch is "N".(see page 3) .........2 1. To prevent a short circuit, remove the key from th
ملخص المحتوى في الصفحة رقم 11
Connections Installation Centre unit Installation Firewall or metal support Screw (M4X8) (commercially Control input available) White/Black FRONT • L + Bend the tabs of the White mounting sleeve with Gray/Black a screwdriver or similar utensil and Metal mounting strap Self-tapping attach it in place. FRONT • R + (commercially available) screw Gray (commercially available) On cars where there is no compartment in the centre for KMD-D401 installing a car audio unit: Use the spacer 2 to affix th
ملخص المحتوى في الصفحة رقم 12
Installation Removing the hard rubber frame Removing the Unit 1 1 Refer to the section “Removing the hard rubber frame” and Engage the catch pins on the removal tool and remove the two then remove the hard rubber frame. locks on the lower level. Lower the frame and pull it forward as shown in the figure. 2 Remove the Hex-head screw with integral washer (M4´8) on the back panel. 3 Insert the two removal tools deeply into the slots on each side, Catch as shown. Lock Screw (M4X8) Catch facing up (c
ملخص المحتوى في الصفحة رقم 13
Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM POSSIBLE CAUSE SOLUTION The disc control mode cannot No cable has been connected to the disc changer input Connect the control cable to the disc changer input terminal be selected. terminal on the unit. on the centre unit. The disc cannot be changed. Four MDs have been set in the m
ملخص المحتوى في الصفحة رقم 14
Troubleshooting Guide The following messages are displayed on the centre unit when certain problems are occurring in your system. Take the recommended actions. No MD is loaded. E-01 / EJECT • The MD is extremely soiled. E-04 • The MD has so many scratches. The faceplate of this unit has been removed. NO PANEL ] Replace it. E-30 Nothing has been recorded on the MD. BLANK ] The next MD will automatically be played. No tracks are recorded on the MD, although it has a title. NO TRACK ] The next MD w
ملخص المحتوى في الصفحة رقم 15
Specifications Specifications subject to change without notice. MD player section General Laser diode ....................................................GaAlAs (l=780 nm) Operating voltage ..............................14.4 V (11 – 16 V allowable) Digital filter (D/A)......................................8 Times Over Sampling Current consumption............................................................0.8 A D/A Converter......................................................................20
ملخص المحتوى في الصفحة رقم 16
