ملخص المحتوى في الصفحة رقم 1
CD-RECEIVER
KDC-XBT8013U
KDC-XBT8013UL
KDC-X7013U
KDC-X7013UL
INSTRUCTION MANUAL
© B64-4418-00/00 (MW/M3W)
ملخص المحتوى في الصفحة رقم 2
Contents Before use 3 Sound Setup 25 Cabin selection Basic Operation 4 Speaker setting Hands-free phoning DTA (Digital Time Alignment) setting X’Over setting Function Control 6 Preset Equalizer curve select Display Settings 10 Manual Equalizer Control Preset position selection Display Type Selection Manual position setting Text Display Selection Audio Preset Memory Illumination Color Selection Audio Preset Recall Auxiliary Input Display Setting Favorite Control 30 Music disc/Audio file Operation
ملخص المحتوى في الصفحة رقم 3
Before use • If you experience problems during installation, 2WARNING consult your Kenwood dealer. To prevent injury or fire, take the following • When you purchase optional accessories, check with precautions: your Kenwood dealer to make sure that they work • To prevent a short circuit, never put or leave any with your model and in your area. metallic objects (such as coins or metal tools) inside • Characters that conform to GB2312 or ISO 8859-1 the unit. can be displayed. Refer to “MENU
ملخص المحتوى في الصفحة رقم 4
Basic Operation [ ] Release [SRC] Microphone AUX Auxiliary [ ] [FNC] USB Terminal [AUD] Control input [AUTO] knob Auxiliary input General functions Connect a portable audio device with mini-plug Power/Source Select button: [SRC] cable (3.5 ø). Turns on the power. ⁄ When the power is ON, select a source. • Use the mini-plug cable which is stereo type and does not SRC Select mode 1: Press the [SRC] button and then have any resistance. turn the Control knob or push it toward up or down. •
ملخص المحتوى في الصفحة رقم 5
Favorite Control : Control knob ⁄ You can recall the various registered functions by • 3 inch (8 cm) CD cannot be used. Attempt to insert using turning the Control knob. an adapter can cause malfunction. For example, you can recall and playback the playlist Disc ejection: [0] in iPod while listening to Tuner. ⁄ Refer to (page 30). • You can eject the disc for 10 minutes after switching off the engine. Tuner functions USB device/iPod play: USB Terminal Connecting a US
ملخص المحتوى في الصفحة رقم 6
Function Control Functions in the table below can be set up by using Function Control. Displayed item is depending on currently selected 1 Enter Function Control mode source or mode. The mark in Condition column Press the [FNC] button. shows the condition to which the item is displayed. 2 Select a Function group. : Can be set in other than standby state. Push the Control knob towards right or left. : Can be set in standby state. Pushing the Control knob towards left allows you : Can be
ملخص المحتوى في الصفحة رقم 7
Source function item Function Setting Entry Setting overview Condition Page “iPod BY HAND” “ON”/ “OFF”* When set to “ON”, allows you to operate iPod with the 13 control on the iPod. “FILE SCAN” “ON”/ “OFF”* When set to “ON”, plays the intro of the music in the — folder successively. “FOLDER RDM” “ON”/ “OFF”* When set to “ON”, plays the music in the folder — randomly. “ALL RANDOM” “ON”/ “OFF”* When set to “ON”, all songs in iPod are played at 13 random. “FILE REPEAT” “ON”/ “OFF”* When set to “O
ملخص المحتوى في الصفحة رقم 8
Function Control Category Item Setting Entry Setting overview Condition Page “SP Select”** “Front”*/ Specify the voice output speaker. * “F-R”/ “F-L ” “Call Beep”** “ON”*/ “OFF” Output a beep from the speaker when a call comes in. * “BT F/W Update”** — Display the firmware version and update the firmware. 34 1 sec. “Beep” “OFF”/ “ON”* Setting the operation check sound (beep sound) ON/ — OFF. “Clock Adjust” — 1 sec. Sets the clock. —22 “Date Adjust” — Sets the date. 22 1 sec. “Date Mo
ملخص المحتوى في الصفحة رقم 9
Category Item Setting Entry Setting overview Condition Page “Text Select” — Sets the Type A/B/C text display. —10 “Status” Appear/ Sets the Type A Status display. —— Disappear “Color “All” “Variable Sets the panel and display illumination color. 11 Select” Scan”*/ “Color 1” – “Display” Sets the display illumination color. “Color 10”/ “Right” Sets the right side of panel illumination color. “User” “Left” Sets the left side of panel illumination color. “SOUND” “Control” “EQ” — Sets the sound qu
ملخص المحتوى في الصفحة رقم 10
Display Settings Display Type Selection Text Display Selection Shown below are examples of display types. Changes displayed information on each source following; Display Display Type “TYPE [A]” Displays 4 to 5 lines of text. In Tuner source “TYPE [B]” Displays a line of text and video. Information Display “TYPE [C]” Displays a line of text and the spectrum analyzer. Frequency “Frequency” “TYPE [D]” Displays the clock. Spectrum analyzer & Clock (“TYPE [A]/[B]”) “Speana/Clock” or Clock (“TYPE [C]
ملخص المحتوى في الصفحة رقم 11
The color you created can be called when you 3 Select the text select “User”. Turn the Control knob. 1. Press the Control knob for at least 1 second. 4 Exit Text display selection mode Enter the detail color adjustment mode. Press the [FNC] button. 2. Set the color. ⁄ Operation type Operation • If the selected display item does not have any To select the color to adjust. Push the Control knob towards right information, alternative information is displayed. (red, green, or blue) or left. • Whe
ملخص المحتوى في الصفحة رقم 12
Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of iPod Music Search Music Search for iPod Selecting the music you want to listen to from the Search for the song (in iPod) you want to play. device or media being played now. 1 Enter Music Search mode 1 Enter Music Search mode Press the [ ] button. Press the [ ] button. 2 Search for music “SEARCH” is displayed. Operation type Operation Displays the current Audio file name. Movement between items Turn the Cont
ملخص المحتوى في الصفحة رقم 13
Function of iPod 2 Start the alphabet search Push the Control knob towards down. iPod Control by Hand Mode “A B C …” is displayed. Allows you to operate iPod with the control on the • If you can not search for a song by an alphabetic iPod. character in the browse item selected now, the data on the screen does not change. Enter iPod Control by Hand Mode 3 Select the initial to be searched for Select “iPod BY HAND”. For how to select Function Control items, refer to Operation type Operation <
ملخص المحتوى في الصفحة رقم 14
Music disc/Audio file Operation Function of disc changers with remote control Direct Disc Search Searchs the disc by entering the disc number. 1 Enter the disc number Press the number buttons on the remote control. 2 Search the disc Press the [FM+] or [AM–] button. Cancelling Direct Disc Search Press the [38] button. ⁄ • Direct Disc Search cannot be performed during playing of Random play or scan play. • Input “0” to select disc 10. Basic Operation of Disc Changer (Optional) Selecting CD chan
ملخص المحتوى في الصفحة رقم 15
Tuner Operation Function of remote control Auto Memory Entry Direct Access Tuning Putting stations with good reception in the memory automatically. Entering the frequency and tuning. 1 Enter Auto Memory Entry mode 1 Enter Direct Access Tuning mode Select “AUTO MEMORY” . Press the [DIRECT] button on the remote For how to select Function Control items, refer to control. (page 6). “– – – –” is displayed. 2 Open Auto Memory Entry 2 Enter the frequency Turn the Control knob to s
ملخص المحتوى في الصفحة رقم 16
Function of KDC-XBT8013U/ KDC-XBT8013UL KDC-X7013U/ KDC-X7013UL with KCA-BT200 (Optional Accessory) Operation of hands-free phoning your cell-phone to return to the hands-free talk mode. Before Use Adjusting the Voice Volume during a Call • For details on the Bluetooth cell-phone with the hands-free function, see Turn the [AUD] knob. (Page 41). • You need to register your cell-phone before using it with this unit. For more details, see (Pa
ملخص المحتوى في الصفحة رقم 17
Making a call Speed dialing (Preset dial) 1 Enter dialing method mode 1 Enter dialing method mode KDC-XBT8013U/ KDC-XBT8013UL: KDC-XBT8013U/ KDC-XBT8013UL: Press the [ ] button. Press the [ ] button. KDC-X7013U/ KDC-X7013UL: KDC-X7013U/ KDC-X7013UL: Press the [ ] button for at least 1 second. Press the [ ] button for at least 1 second. 2 Press the Control knob. 2 Select a dialing method Select the “DIAL”, “PHONE BOOK”, “OUT-CALL”, Press the Control knob. “IN-CALL”, or “MISSED CALLS” display. “D
ملخص المحتوى في الصفحة رقم 18
Function of KDC-XBT8013U/ KDC-XBT8013UL KDC-X7013U/ KDC-X7013UL with KCA-BT200 (Optional Accessory) Operation of hands-free phoning Calling a number in the Phone Book Calling a number in the call log 1 Enter dialing method mode 1 Enter dialing method mode KDC-XBT8013U/ KDC-XBT8013UL: Press the [ ] button. Press the [ ] button. 2 Select the call log mode KDC-X7013U/ KDC-X7013UL: Press the Control knob. Press the [ ] button for at least 1 second. Select the “OUT-CALL” (outgoing call), “IN-CALL” 2
ملخص المحتوى في الصفحة رقم 19
⁄ • If your voice cannot be recognized, a message is displayed. Pressing the Control knob allows you to retry voice input. (Page 48) • Both the name and category requires registration of a voice tag. (Page 34) • Audio sound is not output during voice recognize. Registering to the Preset Dial Number List 1 Enter the phone number you wish to register Enter the phone number with reference to the following: Dial a number/ Calling a number in the call log/ Calling a number in the Phone Book 2 E
ملخص المحتوى في الصفحة رقم 20
Bluetooth Audio Operation Before Use • For details on the Bluetooth Audio player which can be connected, see (Page 41). • You need to register your Bluetooth Audio player before using it with this unit. For more details, see (Page 32). • You to select the Bluetooth audio player you wish to connect. Refer to (Page 33). Basic Operation Selecting Bluetooth Audio source Press
