Kenwood KDC-W6141U دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

CD-RECEIVER
KDC-W6641U
KDC-W6541U
KDC-W6141U
KDC-W6041U
INSTRUCTION MANUAL
Declaration of Conformity with regard to the EMC Directive
2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
© B64-4040-00/00 (EW/ E2W)

ملخص المحتوى في الصفحة رقم 2

Contents Before use 3 Basic Operations of remote control 21 Basic Operation 4 Appendix 22 General functions Accessories/ Installation Procedure 26 Tuner functions Disc & Audio file play functions Connecting Wires to Terminals 27 Function Control 6 Installation/Removing the Unit 29 ⁄ • Read through this page first for the setting of each function. Troubleshooting Guide 30 Display Settings 8 Specifications 32 About Display Type Text Display Selection Key Color Selection Disc Naming (DNPS) Auxili

ملخص المحتوى في الصفحة رقم 3

Before use • If you experience problems during installation, 2WARNING consult your Kenwood dealer. To prevent injury or fire, take the following • When you purchase optional accessories, check with precautions: your Kenwood dealer to make sure that they work • To prevent a short circuit, never put or leave any with your model and in your area. metallic objects (such as coins or metal tools) inside • Characters that conform to ISO 8859-1 can be the unit. displayed. • Characters that confor

ملخص المحتوى في الصفحة رقم 4

Basic Operation [SRC] [ATT] [TI] [ ] [FNC] Release Disc slot AUX Auxiliary input Control knob [AUD] (Rear side) USB Terminal Muting volume upon reception of phone call General functions When there is a call, “CALL” is displayed and the audio system is paused. Power/Source Select button [SRC] When the call ends, “CALL” disappears and the audio Turns on the power. system comes back on. When the power is ON, select a source. The audio system comes back on when [SRC] is SRC Select mode 1: Pres

ملخص المحتوى في الصفحة رقم 5

, : Indicates the button etc. to operate. traffic bulletin starts when the function is ON, “Traffic Auxiliary input Auxiliary input INFO” is displayed and traffic information is received. Connect a portable audio device with mini-plug ⁄ cable (3.5 ø). • If the volume is adjusted during reception of traffic ⁄ information, the adjusted volume is memorized • Use the mini-plug cable which is stereo type and does not automatically. The memorized volume will be applied next have any resistanc

ملخص المحتوى في الصفحة رقم 6

Function Control Functions in the table below can be set up by using Function Control. Category Item Setting Entry Setting overview Condition Page Sets security code MENU “Security Set” 1 sec. 16 “SRC Select” “1”*/ “2” Sets the source selection method. 24 When set to “ON”, allows you to select music in the manner “iPod Mode” “OFF”/ “ON”* 12 similar to that of the iPod. “AT COL “OFF”/ “iPod”* When the iPod source is used, sets whether the illumination 24 1 2 color is changed by the iPod. CHG”

ملخص المحتوى في الصفحة رقم 7

Category Item Setting Entry Setting overview Condition Page Presets the setting value of the audio control. The preset “Audio Preset” 1 sec. 20 value is retained after resetting. “DEMO Mode” “OFF”/ “ON”* 2 sec. Specifies whether to enable demonstration. —17 Sets the display pattern. DISP > TYPE A/ B/ C/ D/ E/ F/ G —8 Spectrum Analyzer 1 – 2 Sets the Type E spectrum analyzer display. > GRAPH ‰ > SIDE Text icon/ Source Sets the Type A side icon display. Å icon Sets the text display. > TEXT ÅıÇÎ

ملخص المحتوى في الصفحة رقم 8

Display Settings Function Control 1 Enter Function Control mode About Display Type Press the [FNC] button. Shown below are examples of display types. Function icon is displayed. Display Display Type 2 Select your desired setup item “TYPE [A]” 3 1 1 Operation type Operation 1 Movement between items Turn the Control knob. Selection of item Press the Control knob. “TYPE [B]” 1 1 Return to previous item Press the [FNC] button or “ ” icon 1 Repeat selection and determination until your “TYPE [C]” 2

ملخص المحتوى في الصفحة رقم 9

In Auxiliary input source Text Display Selection Information Display Changing the text display. Auxiliary input name “Source Name” Spectrum Analyzer & Clock “Speana/Clock” In Tuner source Clock “Clock” Information Display Date “Date” Program Service name (FM) “Frequency/PS” Blank “Blank” Title & Artist name* (FM) “Title/Artist” Station name* (FM) “Station Name” 1 Enter Text Display Selection mode (In Display Radio text plus* (FM) “Radio Text Plus” Type A/ B/ C/ D/ F) Radio text (FM) “Radio Tex

ملخص المحتوى في الصفحة رقم 10

Display Settings Function of KDC-W6541U/ KDC-W6641U Disc Naming (DNPS) Key Color Selection Attaching a title to a CD. Selecting the Key (Button) color. 1 Play the disc you want to attach a name to 1 Enter Key Color Selection mode 2 Select Name set mode item during Menu Select “K-COL” . mode For how to select Function Control item, refer to Select the “Name Set” display. (page 6). For how to select Function Control items, refer to 2 Select the Key Color (p

ملخص المحتوى في الصفحة رقم 11

Auxiliary Input Display Setting Selects the display below when changing to Auxiliary input source. 1 Select Auxiliary input display setting item during Menu mode (In AUX mode) Select the “Name Set” display. For how to select Function Control items, refer to (page 6). 2 Enter Auxiliary input display setting mode Press the Control knob for at least 1 second. The presently selected Auxiliary input display is displayed. 3 Select the Auxiliary input display Turn the Control kn

ملخص المحتوى في الصفحة رقم 12

Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of remote control Music Select Direct Music Search Selecting the music you want to listen to from the Searchs the music by entering the track number. device or media being played now. 1 Enter the music number 1 Enter Music Select mode Press the number buttons on the remote Turn the Control knob. control. The music list is displayed. 2 Search the music 2 Search for music Press the [4] or [¢] button. Select the ca

ملخص المحتوى في الصفحة رقم 13

Tuner Operation Function of remote control Station Preset Memory Direct Access Tuning Putting a station in the memory. Entering the frequency and tuning. 1 Select the frequency to put in the memory Push the Control knob towards right or left. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote 2 Enter Preset Memory mode control. Select “P.MEM” . “– – – –” is displayed. For how to select Function Control item, refer to (page 6). 2 Enter the frequency Pre

ملخص المحتوى في الصفحة رقم 14

Tuner Operation PTY (Program Type) Program Type preset Selecting the Program Type below and searching Putting the Program Type in the Preset button for a station; memory and quick recall. Program Type Display Program Type Display Presetting the Program Type Speech “All Speech” Weather “Weather & 1 Select the Program Type to preset Metr” Music “All Music” Refer to (page 14). Finance “Finance” News “News” Children’s “Children's Current Affairs “Current Affairs” 2 Enter Prog

ملخص المحتوى في الصفحة رقم 15

Changing Language for PTY Function Selecting the Program Type display language as follows; Language Display Language Display English “English” Norwegian “Norwegian” Spanish “Spanish” Portuguese “Portuguese” French “French” Swedish “Swedish” Dutch “Dutch” German “German” 1 Enter PTY mode Refer to (page 14). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Turn the Control knob or push it towards up or down. 4 Exit Changing Language mode Press the

ملخص المحتوى في الصفحة رقم 16

Other Functions Now, you can use the unit. Security Code ⁄ When Security Code is set, possibility of theft • If an incorrect code is entered, “Waiting” is displayed, and is reduced because input of Security Code is the input prohibition periods shown in the table below prompted to turn on the unit once it is turned off. is generated. After the input prohibition time lapses, “SECURITY” is ⁄ displayed, and you can reenter the code. • When you activate the Security Code function, it cannot be

ملخص المحتوى في الصفحة رقم 17

Manual Clock Adjustment Demonstration mode setting Turning the demonstration mode ON/OFF. 1 Select Clock Adjustment item during Menu mode (In Standby mode) 1 Select Demonstration item during Menu mode Select the “Clock Adjust” display. Select the “DEMO Mode” display. For how to select Function Control items, refer to For how to select Function Control items, refer to (page 6). (page 6). 2 Enter Clock adjustment mode 2 Set the Demonstration mode Press the

ملخص المحتوى في الصفحة رقم 18

Audio Adjustments Audio Control Audio Setup You can adjust following Audio Control items ; You can set Sound system , such as follows; Adjustment Item Display Range Adjustment Item Display Range Rear volume “REAR VOLUME” 0 — 35 Front High Pass Filter “HPF-F” Through/80/100/120/ 150/180 Hz Subwoofer level “SUB-W LEVEL” –15 — +15 Rear High Pass Filter “HPF-R” Through/80/100/120/ System Q “NATURAL”/ Natural/User setting/Rock/ 150/180 Hz “USER”/“ROCK”/ Pops/Easy/Top 40/Jazz “POPS”/“EASY”/ (The ind

ملخص المحتوى في الصفحة رقم 19

Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Speaker type Display OFF “OFF” For 5 & 4 in. speaker “5/4inch” For 6 & 6x9 in. speaker “6x9/6inch” For the OEM speaker “O.E.M.” 1 Enter Standby Select the “STANDBY” display. For how to select source item, refer to of (page 4). 2 Enter Speaker Setting mode Press the [AUD] knob. “SP SEL” is displayed. 3 Select the Speaker type Turn the [AUD]

ملخص المحتوى في الصفحة رقم 20

Audio Adjustments Audio Preset Memory Audio Preset Recall Registering the value setup by Sound Control. The Recalling the sound setup registered by