ملخص المحتوى في الصفحة رقم 1
Installation
Tumble Dryers
120 Pound Capacity
170 Pound Capacity
Starting Serial No. 0907003062
Refer to Page 5 for Model Identification
TMB1268C
TMB1268
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. 70420801R7EN
September 2011
www.comlaundry.com
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Installation must conform with local codes or, in the absence of local codes, with: In the U.S.A., installation must conform to the latest edition of the American National Standard Z223.1/ NFPA 54 “National Fuel Gas Code” and Standard ANSI/NFPA 70 “National Electric Code.” In Canada, installation must comply with Standards CAN/CSA-B149.1 or Natural Gas and Propane Installation Code and CSA C22.1, latest edition, Canadian Electric Code, Part I. In Australia and New Zealand, installation must com
ملخص المحتوى في الصفحة رقم 4
WARNING • Installation of unit must be performed by a qualified installer. • Install tumble dryer according to manufacturer’s instructions and local codes. • DO NOT install a tumble dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with tumble dryer. Refer to section on connecting exhaust system. Flexible venting materials are known to collapse, be easily cr
ملخص المحتوى في الصفحة رقم 5
Introduction......................................................................................... 5 Table of Model Identification ............................................................................. 5 Customer Service.................................................................................. 5 Contents Wiring Diagram Location..................................................................... 5 Serial Plate Location...........................................................
ملخص المحتوى في الصفحة رقم 6
Steam Requirements........................................................................... 43 Piping Recommendations ..................................................................... 43 Installing Steam Trap and Making Condensate Return Connections ............................................................................ 44 Thermal Oil Prep .................................................................................. 44 120 Pound Tumble Dryers.....................................
ملخص المحتوى في الصفحة رقم 7
Introduction Model Identification Information in this manual is applicable to these models. Gas Steam/Thermal Oil Electric DR120G2-BA120L HU120L XT120L DR120S2-BT120S SU120S DR120E2-BT120E DR120G2-BA120N HU120N XT120N DR120S2-BT120T SU120T DR120E2-BU120E DR120G2-BT120L IT120L XU120L DR120S2-BU120S UT120S CT120E DR120G2-BT120N IT120N XU120N DR120S2-BU120T UT120T CU120E DR120G2-BU120L SA120L YT120L CT120S UU120S HT120E DR120G2-BU120N SA120N YT120N CT120T UU120T HU120E CA120L ST120L CU120S XT120S I
ملخص المحتوى في الصفحة رقم 8
Introduction Serial Plate Location When calling or writing for information about your product, be sure to mention model and serial numbers. Model and serial numbers are located on the serial plate as shown. 1 1 TMB2288N 120 POUND Tumble Dryer 170 POUND Tumble Dryer TMB2288N 1 Serial Plate Conversion Table Multiply By To Obtain Multiply By To Obtain Btu 0.252 kCal Pounds/sq. inch 0.06895 Bars Btu 1055 Joules Pounds/sq. inch 0.070 kg/sq. cm Inch 25.4 Millimeters Pounds (lbs.) 0.454 Kilograms In
ملخص المحتوى في الصفحة رقم 9
Safety Information Precautionary statements (“DANGER,” “WARNING,” and “CAUTION”), followed by specific instructions, WARNING are found in this manual and on machine decals. These precautions are intended for the personal safety of the Failure to install, maintain, and/or operate operator, user, servicer, and those maintaining the this machine according to manufacturer’s machine. instructions may result in conditions which can produce serious injury, death and/or property damage. DANGER
ملخص المحتوى في الصفحة رقم 10
Safety Information Save These Instructions 13. Keep area around the exhaust opening and Important Safety Instructions adjacent surrounding area free from the accumulation of lint, dust and dirt. WARNING 14. The interior of the tumble dryer and the exhaust duct should be cleaned periodically by qualified Hazardous Voltage. Can cause shock, burn service personnel. or cause death. Allow machine power to remain off for two minutes prior to working 15. If not installed, operated and maintained
ملخص المحتوى في الصفحة رقم 11
Safety Information 22. Install this tumble dryer according to this 28. DO NOT operate the tumble dryer if it is Installation Manual. All connections for smoking, grinding, has missing or broken parts. electrical power, grounding and gas supply must 29. DO NOT bypass any safety devices. comply with local codes and be made by licensed personnel when required. 30. Failure to install, maintain, and/or operate this machine according to the manufacturer’s 23. Remove laundry immediately after tumb
ملخص المحتوى في الصفحة رقم 12
Specifications and Dimensions Specifications 120 Pound 170 Pound Noise level measured during operation at 66 dBA 66 dBA operator position of 3.3 feet (1 meter) in front of machine and 5.2 feet (1.6 meters) from floor. 44 x 41 50.75 x 42.5 Cylinder Size: Inches (mm) (1118 x 1041) (1289 x 1080) 120 170 Cylinder Capacity dry weight: Pounds (kg) (54.4) (77.1) 1338 1667 Gas and Electric (607) (756) Standard Packaging Weight: Pounds (kg) 1446 1776 Steam (656) (806) 48.5 x 72 x 90 58 x 74.5 x 99
ملخص المحتوى في الصفحة رقم 13
Specifications and Dimensions 120 Pound Tumble Dryer Dimensions and Exhaust Outlet Locations TOP VIEW OF EXHAUST DUCT W X V H I U B A Y Z C F D E G TMB2326N TMB2326N Cabinet Dimensions Models A BCD E F G H I 31.38 in. 32.5 in. 48.91 in. 49.91 in. 67.92 in. 45.38 in. 46.38 in. 85.7 in. 70 in. 120L/N/E (797 mm) (826 mm) (1242 mm) (1268 mm) (1725 mm) (1153 mm) (1178 mm) (2177 mm) (1778 mm) 31.38 in. 32.5 in. 48.91 in. 49.91 in. 67.92 in. 45.38 in. 46.38 in. 83.5 in. 70 in. 120S (797 mm) (826 mm
ملخص المحتوى في الصفحة رقم 14
Specifications and Dimensions 170 Pound Tumble Dryer Dimensions and Exhaust Outlet Locations TOP VIEW OF EXHAUST DUCT X W Y H I B V A C F D E G TMB2327N TMB2327N Cabinet Dimensions Models AB CD E F G H I 33.86 in. 32.5 in. 50.75 in. 51.75 in. 68.85 in. 52.12 in. 53.12 in. 94 in. 75.12 in. 170L/N/S (860 mm) (826 mm) (1289 mm) (1314 mm) (1749 mm) (1324 mm) (1349 mm) (2388 mm) (1908 mm) Refer to Position and Level the Tumble Dryer to temporarily reduce the heights of these models. Exhaust Outle
ملخص المحتوى في الصفحة رقم 15
Specifications and Dimensions Electric and Gas Connection Locations for Gas Models A C A C D D B B 120L/N 170L/N TMB2255N Electrical Connection Gas Connection Models ABCD Diameter 18.34 in. 77.84 in. 12.5 in. 70.5 in. 3/4 in. NPT 120L/N (466 mm) (1977 mm) (318 mm) (1791 mm) 21 in. 81 in. 14.85 in. 77.4 in. 1 in. NPT 170L/N (533 mm) (2057 mm) (377 mm) (1966 mm) NOTE: These figures are approximate dimensions only. 70420801 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 1
ملخص المحتوى في الصفحة رقم 16
Specifications and Dimensions Electric and Steam Connection Locations for Steam Models A1 C A2 A1 A2 C B2 B1 B2 B1 F E E F D D 120S 170S TMB2256N Steam Inlet Models Diameter A1 A2 F 3/4 in. NPT 35.875 in. 13.375 in. 82.75 in. 120S (911 mm) (340 mm) (2102 mm) 3/4 in. NPT 37.625 in. 15.25 in. 88 in. 170S (956 mm) (387 mm) (2235 mm) Steam Outlet Models Diameter B1 B2 D 3/4 in. NPT 34.625 in. 13.125 in. 68.5 in. 120S (879 mm) (333 mm) (1740 mm) 1 in. NPT 44.625 in. 8.75 in. 71.75 in. 170S (1133 mm)
ملخص المحتوى في الصفحة رقم 17
Specifications and Dimensions Electric Connection Location for Electric Models A B TMB2336N Models A B 35.81 in. 85.64 in. 120E (910 mm) (2175 mm) 70420801 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 15
ملخص المحتوى في الصفحة رقم 18
Installation Pre-Installation Inspection Materials Required (Obtain locally) Upon delivery, visually inspect the crate, carton and One Single Pole fused disconnect All Models parts for any visible shipping damage. If the crate, switch or circuit breaker on 1 Phase carton or cover is damaged or signs of possible models. damage are evident, have the carrier note the condition Circuit breaker on 3 Phase models. on the shipping papers before the shipping receipt is signed, or advise the carri
ملخص المحتوى في الصفحة رقم 19
Installation IMPORTANT: Install tumble dryers with sufficient clearance for servicing and operation. Refer to WARNING Figure 1. To reduce the risk of serious injury, install lockable door(s) to prevent public access to rear of tumble dryers. W055R1 WARNING To reduce the risk of severe injury, clearance of tumble dryer cabinet from combustible construction must conform to the minimum clearances. W056R1 3 2 1 4 5 6 TMB2020N 7 8 TMB2020N NOTE: Shaded areas indicate adjacent structure. 1 0.5 i
ملخص المحتوى في الصفحة رقم 20
Installation 7. Gas tumble dryers: Start the tumble dryer and Position and Level the Tumble Dryer check the burner flame. Adjust the gas inlet The tumble dryer may be moved with or without the shutter as required. Refer to Adjustments section. skid. To remove the skid, unscrew the four shipping IMPORTANT: The Electronic Ignition system will bolts, and discard them. attempt to light the gas by sparking for the “trial To fit a 170 pound tumble dryer (with shipping skid) for ignition” period
