ملخص المحتوى في الصفحة رقم 1
CD RECEIVER KD-SC800/KD-S790
RECEPTOR CON CD KD-SC800/KD-S790
RECEPTEUR CD KD-SC800/KD-S790
KD-SC800
KD-S790
S
COMPACT
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
INSTRUCTIONS the top or bottom of the cabinet.
Retain this information for future
MA
ملخص المحتوى في الصفحة رقم 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
ملخص المحتوى في الصفحة رقم 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 SOUND ADJUSTMENTS ................... 17 How to use the M (MODE) button ............. 3 Selecting preset sound modes (C-EQ: custom equalizer) ....................... 17 LOCATION OF THE BUTTONS ............ 4 Adjusting the sound ............
ملخص المحتوى في الصفحة رقم 4
LOCATION OF THE BUTTONS Control panel Display window 1 Remote sensor u RND (random) button 2 Control dial i Number buttons 3 (standby/on/attenuator) button o E (EQ: equalizer) button 4 SEL (select) button ; CD button 5 Screws—M2 × 5 mm (1/4") (only for KD-SC800) a∞ (down) button 6 Plate cover and standard plate –10 button (only for KD-SC800) 7 FM/AM button Display window 85 (up) button s LOUD indicator +10 button d EQ (equalizer) indicator 90 (eject) button f CD–in indicator p4 /¢ buttons g CD
ملخص المحتوى في الصفحة رقم 5
3 • Selects the preset stations while listening to Remote controller—RM-RK41 the radio. Each time you press the button, the preset This section is for KD-SC800. station number increases, and the selected station is tuned in. • Does not function as the DISC – button. 4 Functions the same as the control dial on the main unit. Note: These buttons do not used for adjusting “CLOCK H,” “CLOCK M,” “LEVEL,” and “DIMMER” (see pages 9, 19, and 20). 5 Selects the sound mode (C-EQ: custom equalizer). Each t
ملخص المحتوى في الصفحة رقم 6
3 Selects the preset stations while listening to Remote controller—RM-RK60 the radio. Each time you press the button, the preset This section is for KD-S790. station number increases, and the selected station is tuned in. 4 Selects the sound mode (C-EQ: custom equalizer). Each time you press the button, the sound mode (C-EQ) changes. 5 Selects the band while listening to the radio. Each time you press the button, the band changes. S 6 Selects the source. Each time you press the button, the sourc
ملخص المحتوى في الصفحة رقم 7
3. Return the battery holder. Preparing the remote controller Insert again the battery holder by pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no (back side) obstacle in between. Remote sensor WARNING: • Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. • Do not recharge, short, disasse
ملخص المحتوى في الصفحة رقم 8
BASIC OPERATIONS 1 3 2 Turning on the power 4 Adjust the sound as you want. (See pages 17 and 18.) 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. When you select a source in step 2 below, the To resume the previous volume level, press the power automatically comes on. You do not have button briefly again. to press this button to turn on
ملخص المحتوى في الصفحة رقم 9
To check the current clock time or change the Setting the clock display mode Press DISP (display) 1 Press and hold SEL (select) for more repeatedly. than 2 seconds. Each time you press the “CLOCK H,” “CLOCK M,” button, the display mode “LEVEL,” or “DIMMER*” changes as follows: appears on the display. * Only for KD-SC800 • During tuner operation: Frequency Clock 2 Set the hour. 1 Select “CLOCK H” (hour) if not shown on • During CD operation: the display. 2 Adjust the hour. Elapsed playing time Cl
ملخص المحتوى في الصفحة رقم 10
RADIO OPERATIONS To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching a station manually: Manual search Searching a station automatically: Auto search 1 Select the band (FM 1 – 3, AM). Each time you press the 1 Select the band (FM 1 – 3, AM). button, the band changes as Each time you press the follows: button, the band ch
ملخص المحتوى في الصفحة رقم 11
Storing stations in memory 3 Tune in to a station you want while “M” (manual) is flashing. You can use one of the following two methods to To tune in to stations of store broadcasting stations in memory. higher frequencies • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations To tune in to stations of lower frequencies FM station automatic preset: SSM You can preset 6 local FM stations in each FM • If you release your finger from th
ملخص المحتوى في الصفحة رقم 12
Manual preset 4 Repeat the above procedure to store other stations into other preset You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually. numbers. Ex.: Storing FM station of 88.3 MHz into the Notes: preset number 1 of the FM1 band. • A previously preset station is erased when a new station is stored in the same preset number. • Preset stations are erased when the power supply to 1 Select the band (FM1 – 3, AM) you the memory circuit is interrupted (for example, want to
ملخص المحتوى في الصفحة رقم 13
CD OPERATIONS The display changes to show the following: Playing a CD The CD–in indicator lights up. 1 Open the control panel. Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD turns on the unit and starts playback Total playing time Total track number automatically. of the inserted disc of the inserted disc 2 Insert a CD into the loading slot. The unit turns on, draws the CD and starts playback automatically. Elapsed playing time Current track All tracks will be
ملخص المحتوى في الصفحة رقم 14
To stop play and eject the CD To go to the next or previous tracks Press 0. Press ¢ briefly, CD play stops and the control panel flips down. while playing a CD, to go The CD automatically ejects from the loading ahead to the beginning of slot. The source changes to the tuner (you will the next track. hear the last received station). Each time you press the • If you change the source, the CD play also button consecutively, the stops (without ejecting the CD). beginning of the next tracks Next ti
ملخص المحتوى في الصفحة رقم 15
To go to a track quickly (+10 and –10 buttons) Selecting CD playback modes 1 Press M (MODE) to enter the functions mode while playing a CD. To play back tracks at random (Disc Random Play) You can play back all tracks on the CD at random. 1 Press M (MODE) to enter the functions mode while playing 2 Press +10 or –10. a CD. To skip 10 tracks* forwards 2 Press RND (random), while to the last track still in the functions mode, so that “DISC RND” appears on To skip 10 tracks* backwards the display. t
ملخص المحتوى في الصفحة رقم 16
To play back tracks repeatedly Prohibiting CD ejection (Track Repeat Play) You can prohibit CD ejection and can lock a CD You can play back the current track repeatedly. in the loading slot. 1 Press M (MODE) to enter the functions mode while playing While pressing CD, press and hold a CD. for more than 2 seconds. 2 Press RPT (repeat), while still in the functions mode, so that “TRK RPT” appears on the display. Each time you press the “NO EJECT” flashes on the display for about 5 button, track r
ملخص المحتوى في الصفحة رقم 17
SOUND ADJUSTMENTS Selecting preset sound modes Indication For: Preset values BAS TRE LOUD (C-EQ: custom equalizer) USER (Flat sound) 00 00 OFF You can select a preset sound mode (C-EQ: ROCK Rock or +03 +01 ON custom equalizer) suitable to the music genre. disco music CLASSIC Classical +01 –02 OFF Select the sound mode you want. music When you press the button POPS Light music +04 +01 OFF once, the last selected sound HIP HOP Funk or rap +02 00 ON mode is recalled and applied music to the current
ملخص المحتوى في الصفحة رقم 18
Adjusting the sound 2 Adjust the setting. You can adjust the sound characteristics to your To increase the level or preference. turn on the loudness 1 Select the item you want to adjust. To decrease the level or turn off the loudness Each time you press the button, the adjustable items change as follows: Equalization pattern changes as you adjust the bass or treble. BAS TRE FAD (bass) (treble) (fader) VOL LOUD BAL Ex. 1: When you adjust “TRE” (treble) (volume) (loudness) (balance) Indication To
ملخص المحتوى في الصفحة رقم 19
OTHER MAIN FUNCTIONS Selecting the display color Setting the dimmer mode This section is only for KD-SC800. This section is only for KD-SC800. You can select the color of the display according When you turn on the car head lights, the display to your preference. automatically dims (Auto Dimmer). When shipped from the factory, “ALL DEMO” is When shipped from the factory, Auto Dimmer selected. mode is activated. 1 Press and hold DISP (display) for a 1 Press and hold SEL (select) for more while. th
ملخص المحتوى في الصفحة رقم 20
Selecting the level display MEMO You can select the level display according to your You can use the space below to note your preference. favorite settings—preset stations, sound When shipped from the factory, “AUDIO 2” is modes, and others. selected. 1 Press and hold SEL (select) for more than 2 seconds. “CLOCK H,” “CLOCK M,” “LEVEL,” or “DIMMER*” appears on the display. * Only for KD-SC800 2 Select “LEVEL” if not shown on the display. 3 Select the desired mode. • AUDIO 1: Shows the audio level
