ملخص المحتوى في الصفحة رقم 1
120-VOLT COMPACT
ELECTRIC DRYER
Use & Care Guide
For questions about features, operation/performance
parts, accessories or service, call: 1-800-253-1301.
or visit our website at...
www.crosley.com
Table of Contents ................................................. 2
W10151585B
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS DRYER SAFETY..............................................................................2 Drying, Cycle, and Temperature Tips ........................................10 Cycles.........................................................................................10 INSTALLATION INSTRUCTIONS..................................................3 Tools and Parts ............................................................................3 DRYER CARE................................
ملخص المحتوى في الصفحة رقم 3
INSTALLATION INSTRUCTIONS Parts needed Check local codes, existing electrical supply and venting, and see Tools and Parts “Venting Requirements” and “Electrical Requirements” before Tools needed purchasing parts. Gather the required tools and parts before starting installation. ■ Mobile home installations require metal exhaust system Read and follow the instructions provided with any tools listed here. hardware ■ Flat-blade screwdriver ■ Caulking gun and compound ■ Permanent installation
ملخص المحتوى في الصفحة رقم 4
Minimum spacing for recessed area and closet installation The following dimensions shown are for the minimum spacing Location Requirements allowed when the dryer is to be operated with, or without, the Stack Stand Kit. To purchase a Stack Stand Kit, see “Assistance or Service.” ■ Additional spacing should be considered for ease of installation and servicing. ■ Additional clearances might be required for wall, door, and floor moldings. ■ Additional spacing of 1" (25 mm) on all sides of the
ملخص المحتوى في الصفحة رقم 5
Mobile home installations require: ■ Metal exhaust system hardware, which is available for purchase Venting Requirements from your dealer. ■ Special provisions must be made in mobile homes to introduce outside air into the dryer. The opening (such as a nearby window) should be at least twice as large as the dryer exhaust opening. Electrical Requirements WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED OUTDOORS. IMPORTANT: Observe all governing codes and ordinances. The drye
ملخص المحتوى في الصفحة رقم 6
■ Do not install flexible metal vent in enclosed walls, ceilings, ■ Do not use an exhaust hood with a magnetic latch. or floors. ■ The total length of flexible metal vent should not exceed 3 7 /4 ft (2.4 m) Elbows 45° elbows provide better airflow than 90° elbows. Plan Vent System Choose your exhaust installation type Recommended exhaust installations Typical installations vent the dryer from the rear of the dryer. Good A Better A Clamps ■
ملخص المحتوى في الصفحة رقم 7
■ Periscope Installation (for use with dryer vent to wall vent Vent system chart mismatch): Number of Type of Box or Angled Part Number 4396037 - for mismatch of 0" (0 mm) to 90º turns vent louvered hoods 18" (457 mm) or elbows hoods Part Number 4396011 - for mismatch of 18" (457 mm) to 0 Rigid metal 36 ft (11 m) 26 ft (7.9 m) 29" (737 mm) 1 Rigid metal 26 ft (7.9 m) 16 ft (4.9 m) Part Number 4396014 - for mismatch of 29" (737 mm) to 50" (1.27 m) 2 Rigid metal 16 ft (4.9 m) 6 ft (1.8 m
ملخص المحتوى في الصفحة رقم 8
2. Insert cord brackets into slotted holes in rear panel and secure with screws provided. Complete Installation 1. Check that all parts are now installed. If there is an extra part, go back through steps to see what was skipped. 2. Check that you have all of your tools. 3. Dispose of/recycle all packaging materials. 4. Check dryer’s final location. Be sure vent is not crushed or kinked. A 5. Check that dryer is on a level surface. 6. Plug into a grounded 3 prong outlet. Turn power on. 7. Re
ملخص المحتوى في الصفحة رقم 9
DRYER USE Before using your dryer, wipe dryer drum with a damp cloth to remove dust from storing and shipping. Starting Your Dryer 1. Load clothes loosely into dryer and close the door. Do not pack dryer. Allow space for clothes to tumble freely. 2. Turn Cycle Control knob to the recommended cycle for the type of load being dried. Use the Energy Preferred Automatic Setting (*) to dry most heavyweight and medium-weight loads. See “Drying, Cycle, and Temperature Tips.” 3. Press PUSH TO STAR
ملخص المحتوى في الصفحة رقم 10
Air Dry Cycle Use this cycle for items that require drying without heat, such Drying, Cycle, and Temperature Tips as rubber, plastic, and heat-sensitive fabrics. See the chart for Select the correct cycle and temperature for your load. examples of items that can be dried using an air cycle. Your dryer tumbles the load without heat during the last few minutes Type of Load Time* of all cycles to make the load easier to handle. Drying tips Foam rubber—pillows, padded bras, stuffed ■ Follow
ملخص المحتوى في الصفحة رقم 11
DRYER CARE 3. Wet a nylon brush with hot water and liquid detergent. Scrub lint screen cover and body with the brush to remove residue buildup. Cleaning the Dryer Location Keep dryer area clear and free from items that would obstruct the flow of combustion and ventilation air. 4. Rinse with hot water. 5. Thoroughly dry lint screen body and cover with a clean towel. Replace in dryer. Cleaning the Dryer Interior To clean dryer drum 1. Make a paste with powdered laundry detergent and very warm
ملخص المحتوى في الصفحة رقم 12
TROUBLESHOOTING First try the solutions suggested here to possibly avoid the cost of a service call... Dryer Operation Dryer Results Dryer will not run Clothes are not drying satisfactorily, drying times are too long, or load is too hot ■ Has a household fuse blown, or has a circuit breaker tripped? NOTE: The compact dryer operates at a lower wattage. Expect There may be 2 fuses or circuit breakers for the dryer. Check longer drying times. that both fuses are intact and tight, or that both c
ملخص المحتوى في الصفحة رقم 13
■ Is the exhaust vent diameter the correct size? Use 4" (102 mm) diameter vent material. Lint on load ■ Is the lint screen clogged? Lint screen should be cleaned before each load. Stains on load or drum ■ Was dryer fabric softener properly used? Add dryer fabric softener sheets at the beginning of the cycle. Fabric softener sheets added to a partially dried load can stain your garments. Drum stains are caused by dyes in clothing (usually blue jeans). This will not transfer to other clot
ملخص المحتوى في الصفحة رقم 14
ASSISTANCE OR SERVICE ACCESSORIES Before calling for assistance or service, please check Enhance your dryer with these premium accessories. “Troubleshooting.” It may save you the cost of a service call. For more high-quality items or to order, call 1-800-901-2042, or If you still need help, follow the instructions below. visit us at www.applianceaccessories.com. In Canada, call When calling, please know the purchase date and the complete 1-800-807-6777 or visit us at www.whirlpoolparts.ca
ملخص المحتوى في الصفحة رقم 15
® CROSLEY CORPORATION LAUNDRY WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for factory specified parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be provided by a Whirlpool designated serv
ملخص المحتوى في الصفحة رقم 16
® Registered Trademark of The Crosley Group, Inc. 12/10 W10151585B Printed in U.S.A. © 2010. All rights reserved.
