ملخص المحتوى في الصفحة رقم 1
Earn BISSELL Rewards! Earn BISSELL Rewards!
R Register your egister your
product today! product today!
See details on See details on
back page back page
USER'S GUIDE
62X5 SERIES
2
Thank You
3
Safety Instructions
4
Product View
5
Assembly
6-8
Operations
8-12
Maintenance and Care
13
Troubleshooting
14
Replacement Parts
14
Accessories
15
Warranty
16
Consumer Services
ملخص المحتوى في الصفحة رقم 2
Thanks for buying a BISSELL vacuum We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL vacuum is well made, and we back it with a limited three year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floor
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appli- ■ Turn off all controls before plugging or ance, basic precautions should be unplugging vacuum cleaner. observed, including the following: ■ Use extra care when cleaning stairs. ■ Do not pick up flammable materials Read all instRuctions (lighter fluid, gasoline, kerosene, etc.) or befoRe using youR use in the presence of explosive liquids or vapors. upRight V acuuM. ■ Do not pick up toxic material (chlorine Always connect to
ملخص المحتوى في الصفحة رقم 4
Product view Handle Stretch Hose ® TurboBrush Tool Hose Clip Power Switch Crevice Tool Quick Carrying ® Reach Handle Extension Handle Wand Combination Dusting Brush/ ™ Easy Empty Upholstery Tool Dirt Container HEPA Media Filter Cup Filter* Activated Washable Carbon Filter Hose Filter (select models Wand only) Automatic Lock ’n Cord Rewind ™ Seal Lever Handle Release Hose Pedal Wand Base Foot Hose Height Powerfoot Furniture Protection Adjustment Knob Guard WaRning: cau
ملخص المحتوى في الصفحة رقم 5
Assembly you need: phillips head screwdriver. 2. attach handle to vacuum 1. Locate the vacuum handle and remove the screw packet taped to the base of the handle. 2. Stand the vacuum upright and slide the base of the handle firmly into the grooves 4. at the top of the vacuum body. 3. Check to be sure the handle is fitted to the vacuum body. If there is a gap in front, continue to push firmly until the handle is flush. 4. Insert the screw provided from the screw packet into the existing ho
ملخص المحتوى في الصفحة رقم 6
Operations automatic cord rewind 1. Gently pull out power cord and stop when yellow line is visible. Do not pull power cord beyond the red line. Plug cord into electrical outlet. 2. To return cord, turn vacuum power switch OFF, and remove plug from outlet. Hold plug and press automatic cord button to wind cord into reel. Do not allow plug to whip when rewinding. power switch the power switch is located just below the handle on the side of the vacuum. i -on o- off handle position pres
ملخص المحتوى في الصفحة رقم 7
Operations tools attach desired tool to hose for above NOTICE: floor cleaning surfaces or hard to reach The floor brush will areas. continue to rotate 1. Remove Hose: with vacuum in upright while you use your position, grasp the Quick Reach Handle vacuum for above to separate hose from hose base. floor cleaning. To 2. Attach tools by firmly pushing onto prevent carpet dam- vacuum hose or extension wand. age, do not lean on a. combination dusting brush/ the vacuum or let the upho
ملخص المحتوى في الصفحة رقم 8
Operations empty dirt container empty when dirt reaches the “full” line on the container. Full Line 1. Turn power OFF. Unplug power cord from electrical outlet. 2. Slide Lock ‘n Seal lever to “Unlock” position. Unlock Position Lock Position 3. Grasp dirt cup handle portion and pull straight out to remove from vacuum and empty. 3. 4. Place dirt container back in the vacuum and slide lever to lock position. note: the dirt container may be washed in warm water with mild detergent by hand. d
ملخص المحتوى في الصفحة رقم 9
Maintenance and care cleaning the inner & outer circular filter continued 4. Separate the outer foam filter and inner pleated circular filter. Wash each individually by hand in warm water. Mild detergent may be used if desired. Rinse well; let filters com- pletely air dry before replacing in filter cup. 5. Wash filter cup in warm water with mild detergent. Completely air dry before reassembling with filters. do not put in dishW asheR. 6. 6. The upper tank and louvers can be wiped cle
ملخص المحتوى في الصفحة رقم 10
Maintenance and care checking rotating floor brush and drive belt check your vacuum’s rotating floor brush and drive belt regularly for 3. wear or damage. 1. Turn power OFF. Unplug vacuum cord from electrical outlet. 2. Place handle in low position and turn vacu- um over so bottom side is facing up. 3. Using a screwdriver, remove the five screws and lift brush cover off. Brush Cover 4. 4. Grasp rotating floor brush at both ends and lift. Motor Pulley 5. Clean strings, hair and other d
ملخص المحتوى في الصفحة رقم 11
Maintenance and care clearing a clog low suction or poor pickup may be due to a clog in the vacuum. if you notice a change in the sound of the vacuum motor, check for clogs. 3. 1. Turn power OFF. Unplug vacuum cord from electrical outlet. Suction inlet 2. Empty dirt container. 3. Check upper tank and suction inlet for clogs. 4. Grasp Quick Reach Handle and remove hose wand from base to check for clogs in the base, the wand, and the hose. 5. Remove the screw attaching the hose wand base t
ملخص المحتوى في الصفحة رقم 12
Maintenance and care turbobrush tool maintenance select models include pet turboeraser tool that follows same maintenance instructions. 1. Turn power OFF. Unplug vacuum cord from electrical outlet. 2. 2. Turn tool so bottom side faces up and remove the two screws. 3. Remove the faceplate and clear any obstructions 4. 4. Remove the brush from the drive belt to clean debris. 5. Reposition the drive belt on the brush, and place ends of brush in slots on the side. Reposition faceplate an
ملخص المحتوى في الصفحة رقم 13
Troubleshooting Vacuum cleaner won't turn on possible causes Remedies 1. Power cord not plugged in 1. Check electrical plug 2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker 3. Damaged cord 3. Refer to a BISSELL authorized service center for repair or replacement Vacuum cleaner won't pick up possible causes Remedies 1. Clog in hose or elsewhere in vacuum 1. Follow instructions on page 11 for clearing clogs 2. Filters are dirty 2. Check and clean or replace pre-motor and
ملخص المحتوى في الصفحة رقم 14
Replacement parts Item Part No. Part Name 1 32074 Style 9 Drive Belt (2-Pack) 2 203-2450 Hose Assembly (84G9/18M9/26T5 series) 3 203-2468 Hose Assembly (58F8 series) 4 203-2449 Brush Dowel (15") 5 32R9 Style 16 Inner and Outer Circular Pre-Motor Filter Set 6 73K1 Style 16 Inner Circular Pre-Motor Filter 7 69B1 Style 16 Outer Circular Pre-Motor Filter 8 32076 Style 7/9/16 Post-Motor Filter 9 203-1215 Style 7/9/16 Pre-Motor Filter 10 203-5685 Carbon Pre-Motor Filter (18M9-W model) 1
ملخص المحتوى في الصفحة رقم 15
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. limited three y ear Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc. will repair or replace
ملخص المحتوى في الصفحة رقم 16
Don't forget to register your product! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: bissell Rewards points Automatically earn points for discounts and free shipping on future purchases. faster service Supplying your information now saves you time should you need to contact us with questions regarding your product. product support Reminders and alerts We’ll contact you with any important product maintenance reminders and alerts. special
