ملخص المحتوى في الصفحة رقم 1
Booster Seat
Owner’s Manual
READ THIS MANUAL.
Do not install or use this car seat until you read and
understand the instructions in this manual.
FAILURE TO PROPERLY USE THIS CAR SEAT
INCREASES THE RISK OF SERIOUS INJURY
OR DEATH IN A SUDDEN STOP OR CRASH.
© 2012 Graco PD194386A 2/12 US
ملخص المحتوى في الصفحة رقم 2
Table of Contents Registration Information ............................... 3 For Recall Information .................................. 3 If You Need Help .......................................... 5 Parts List ....................................................... 6 Warnings to Parents and Other Users ........7-9 Assembling the Booster Seat .................10-11 Assembling the Back Support ...............12-17 Weight and Height Limits......................18-19 Vehic
ملخص المحتوى في الصفحة رقم 3
Registration Information Model Number: Date of Manufacture: Purchase Date: Register Your Booster Seat Please fill in the above information. The model number and date of manufacture can be found on a label underneath your booster seat. Fill out the prepaid registration postcard attached to the seat cover and mail it today. Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a model number and date of manufacture to: 150 Oaklands
ملخص المحتوى في الصفحة رقم 4
NEVER PLACE THIS BOOSTER SEAT IN A VEHICLE SEATING LOCATION THAT HAS AN AIR BAG. If an air bag inflates, it can hit the child and booster seat with great force and cause serious injury or death to your child. Refer to your vehicle about air bags and booster seat installation. 4
ملخص المحتوى في الصفحة رقم 5
If You Need Help Please contact our Customer Service Department with any questions you may have concerning parts, use, or maintenance. When you contact us, please model number ready so that we may help you efficiently. This number can be found on a sticker on the underside of your booster seat. 1-800-345-4109 or www.gracobaby.com Booster Seat Useful Life STOP using this child restraint and throw it away 10 years after the date of manufacture. Look for this sticker on the bottom of the
ملخص المحتوى في الصفحة رقم 6
Parts List Adult assembly required. Tool required: Philips screwdriver Shoulder belt positioning clip Base Lower back support Head support On certain models Armrest covers 6
ملخص المحتوى في الصفحة رقم 7
Warnings to Parents and Other Users NO BOOSTER SEAT CAN GUARANTEE PROTECTION FROM INJURY. HOWEVER, PROPER USE OF THIS BOOSTER SEAT REDUCES THE RISK OF SERIOUS INJURY OR DEATH TO YOUR CHILD. DO NOT INSTALL OR USE THIS BOOSTER SEAT UNTIL YOU READ AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL AND IN YOUR VEHICLE OWNER’S MANUAL. DO NOT let others install or use the booster seat unless they understand how to use it. FAILURE TO PROPERLY USE THIS BOOSTER SEAT INCREASES THE RISK OF
ملخص المحتوى في الصفحة رقم 8
CHILDREN ARE SAFER WHEN PROPERLY RESTRAINED IN REAR VEHICLE SEATING POSITIONS, RATHER THAN FRONT SEATING POSITIONS. For a vehicle with a front passenger air bag, refer to your instructions for booster seat installation. NEVER LEAVE YOUR CHILD UNATTENDED. NEVER LEAVE A BOOSTER SEAT UNSECURED IN YOUR VEHICLE. An unsecured booster seat can be thrown around and may injure occupants in a sharp turn, sudden stop or crash. Remove it or make sure that it is securely belted in
ملخص المحتوى في الصفحة رقم 9
THE BOOSTER SEAT CAN BECOME VERY HOT IF LEFT IN THE SUN. Contact with these surface of any metal or plastic parts before putting your child in the booster seat. THIS CHILD RESTRAINT CONFORMS to all applicable Federal Motor Vehicle Safety Standards and is certified for use in motor vehicles. This restraint is NOT certified for use in aircraft because there is no shoulder belt available. NEVER GIVE THIS BOOSTER SEAT to someone else without also giving them this manual.
ملخص المحتوى في الصفحة رقم 10
Assembling the Booster Seat Step 1. 1 To adjust armrests, remove screw and 1 press in button on side of base as shown to raise or lower . Reinsert 2 screw and tighten. 2 CHECK to make sure armrests are securely attached by pulling up on them. Step 2. Slip armrest covers 3 (on certain models) 3 onto armrests as shown. Step 3. Slip armrest cover behind seat cover and attach hook and loop 4 tape. 4 10
ملخص المحتوى في الصفحة رقم 11
Step 4. Your Graco booster seat is now ready to use. See page 33, “Securing Child in Vehicle with Shoulder Belt Positioning Clip”. FOR MODELS with a back support continue on to Step 5. 11
ملخص المحتوى في الصفحة رقم 12
Assembling the Back Support (on certain models) Step 5. On certain models, your lower back support pad may not be attached to the back support. Place lower back support pad around edges of support as shown. Then fasten lower elastic strap to the metal hook on the other side of the seat pad. If your lower back support pad is already attached go to Step 5a. Step 5a. Flip head support and lower back support over 1 as shown . 1 12
ملخص المحتوى في الصفحة رقم 13
Step 6. Squeeze red adjustment button and slide two pieces 2 together until they snap into place . CHECK to make sure two pieces are securely snapped together by pulling on them. 2 SNAP! Step 7. Attach elastic strap to metal hook on other side of seat pad as shown . If your elastic strap is already 3 attached you can skip to Step 8. 3 13
ملخص المحتوى في الصفحة رقم 14
Step 8. Flip seat over and insert the fabric from the head support underneath the fabric on the lower back support as shown 4 . To make insertion of fabric easier, slide the upper and lower back pieces apart by squeezing the red adjustment button. 4 14
ملخص المحتوى في الصفحة رقم 15
Step 9. Attach backrest to base. “U”-shaped hooks on bottom 5 of backrest will interlock with bars on base . Make sure that no part of the seat covering interferes when attaching backrest to the base. 5 15
ملخص المحتوى في الصفحة رقم 16
Step 10. Once backrest is securely attached to the base, push backrest up as shown 6 . 6 16
ملخص المحتوى في الصفحة رقم 17
Step 11. Your Graco booster seat is now ready to use. See page 23-30, “Using your Graco Booster Seat” and “Securing Your Child in Vehicle”. 17
ملخص المحتوى في الصفحة رقم 18
Weight and Height Limits FAILURE TO USE booster seat in a manner risk of serious injury or death. To use this Graco booster seat, your child MUST meet ALL of the following requirements: With back support (approximately 3 to 10 years old) : (mass between 13.6 and 45 kg), and in height, and 1 MUST lie 1 zone as shown in and the lap portion is positioned low on the childs hips, and of booster seat. If tops of ears are above top of seat, your child is too large for
ملخص المحتوى في الصفحة رقم 19
Without back support (approximately 4 to 10 years old) : (mass between 18 and 45 kg), and (101 and 145 cm) in height, and 2 2 in red zone as shown in and the lap portion is positioned low on the childs hips, and below the top of the vehicle seat cushion / head rest. Your Graco booster seat can be used with or without the back support (on certain models) as long as the above requirements are met. 19
ملخص المحتوى في الصفحة رقم 20
Vehicle Seat Location Requirements IMPROPER PLACEMENT OF THE BOOSTER SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH. Some seating positions in your vehicle may NOT be safe for this booster seat. Some vehicles do not have any seating positions that can be used safely with the booster seat. If you are not sure where to place the booster 1-800-345-4109. Children are safer when properly restrained in rear vehicle seating positions. Whenever possible secure the Graco booster seat in t