Philips AJL308/12 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Software/driver information
Software version 20070710 for AJL308/37 AJL308/17 & AJL308/12
Benefits
- Fixing the problem of displaying the wrong day of the week in the calendar.

Do I need the software?

To check the firmware version of your device
1. Power on the main unit
2. Go to “SETUP Menu”
3. Go to “Source Page”
4. Press “Up”, “Down”, “Up”, “Down”, “Up”, “Up”, “Down”

5. The software version will show on the display. Should you already have the latest software then there is

ملخص المحتوى في الصفحة رقم 2

2. Copy the Philips.bin file into a USB drive or SD card 3. Power on the clock radio and then insert the USB drive or SD card. Please DO NOT disconnect the USB drive or SD card until the software upgrade is completed. 4. Press OK to select USB device or SD card 2

ملخص المحتوى في الصفحة رقم 3

5. Press OK to confirm upgrade of software 6. The screen will show “File Copying” The message will show for 3 seconds and then the software upgrade will begin. 3

ملخص المحتوى في الصفحة رقم 4

7. When main unit starts to upgrade the software, the display will show “UPGRADING”, it will last 3 minutes. 8. After 3 minutes, the unit will auto-restart. 9. Go to “General”, select “Restore default setting” 4

ملخص المحتوى في الصفحة رقم 5

10. The main unit will enter the clock mode. 11. Remove the USB drive or SD card from the clock radio and then unplug and then reconnect the power supply of the clock radio again. 5

ملخص المحتوى في الصفحة رقم 6

6