ملخص المحتوى في الصفحة رقم 1
Model PRO 9233N
OWNER’S MANUAL
KEYLESS ENTRY ALARM UPGRADE MODULE
Congratulations on your purchase of this automotive Keyless Entry Upgrade Alarm
System. This system is a state - of - the - art auto security system that is designed
to automatically arm and disarm when it receives a command from your existing
Factory Keyless Entry Transmitter. Taking a few moments to read this manual will
help to ensure that your vehicle is protected at all times.
NOTE:
The system has the ability to beep the vehi
ملخص المحتوى في الصفحة رقم 2
3. In 30 seconds, you will hear a single short chip from the siren, and the vehicle’s parking lamps will flash one time, indicating that the system has ARMED. At this time, the red dash mounted LED will begin to flash slowly, providing a visual indication that the system is fully armed. 4. It is possible to program the system, that when the alarm is allowed to automatically passive arm, there will be a 15 second delay after a door is opened before the alarm will sound. However, if the system i
ملخص المحتوى في الصفحة رقم 3
vehicle’s doors will suspend the passive arming process until all doors have been closed, or until the ignition key has been turned on. INTRUSION WARNING SIGNALS : The system will inform you if an intrusion attempt has occurred while you were away from the vehicle. If an intrusion attempt has occurred, the siren and or horn will beep four times when the system is disarmed. The vehicle’s parking lights will also flash three times to indicate an intrusion has occurred. Enter the vehicle and observ
ملخص المحتوى في الصفحة رقم 4
MANUALLY OVERRIDING YOUR SYSTEM: USING SIMPLE VALET SWITCH MANUAL OVERRIDE If your factory transmitter is lost, broken, or otherwise rendered inoperable your Security System can be disarmed without the use of the keychain transmitter. This is necessary, since you will need the ability to operate your vehicle if the transmitter is lost or its battery fails. If your system has been selected for Valet Switch manual override as indicated on the last page of this manual, to override the alarm system;
ملخص المحتوى في الصفحة رقم 5
can start and operate your vehicle. The unit will allow three attempts to disarm via the manual override sequence. If the code is not successfully entered within the three attempts, disarming with the manual override switch will be locked for 10 minutes. In many cases, to increase the security of your system, you may elect to change the manual override code to a number that is more familiar to you, or simply to have a different code than was pre-assigned from the factory. To Change the pre- as
ملخص المحتوى في الصفحة رقم 6
Custom Code Programming Example: To Change the code from the factory pre-assigned code of 11 to “52” you would do the following: 1. Disarm the system by use of the transmitter, or by use of the emergency override sequence. 2. Turn the ignition switch to the on position. 3. Within 10 seconds, press and release the valet/override switch, 3 times. 4. Within 10 seconds turn the ignition switch off, on, off, on, off, on. (The siren or horn will beep and the lights will flash one time.) 5. Within 10 s
ملخص المحتوى في الصفحة رقم 7
to the on position and all vehicle doors are closed, the doors will lock in 4 seconds. Additionally, any time the ignition key is turned to the off position, the doors will unlock. ELIMINATING THE ARM / DISARM CHIRPS : The normal arming and disarming confirmation chirps can easily be turned off using the valet pushbutton switch. To do this; 1. Turn the ignition key on, and then off. 2. Within 10 seconds of turning the ignition key off, press and release the valet switch 3 times. 3. a. If, befo
ملخص المحتوى في الصفحة رقم 8
PRO 9233N SYSTEM FUNCTIONS AT A GLANCE DASH LED INDICATORS RAPID FLASHING .......................................................... PASSIVE ARMING SLOW FLASHING ........................................................................... ARMED OFF ........................................................................................... DISARMED ON - SOLID ............................................................................ VALET MODE 3 FLASH ... PAUSE ........................
