Audiovox 5BCR03 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Model 5BCR03
Programming Guide
The AX-900 Model has a configurable receiver that allows the transmitter to
be programmed to operate the Lock Unlock functions with one transmitter
button or with two transmitter buttons (separate Lock/Unlock). In addition,
the receiver also allows driver priority function. This driver priority function
takes place when ever a particular transmitter is used to unlock the vehicle
regardless of the selection of one button or two button operation.
The following ind

ملخص المحتوى في الصفحة رقم 2

3. Within 10 Seconds, Press and hold the button of the first transmitter you wish to control the Lock & Arm feature of your security system until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Lock/Arm feature). 4. Within 10 seconds, press and release the valet program switch one time. (Siren emits 2 short chirps indicating channel 2 has been entered) 5. Within 10 Seconds, Press and hold any unused button(s) of the first transmitter you wish to co

ملخص المحتوى في الصفحة رقم 3

13. Within 10 Seconds, Press and hold the unlock button, (or any unused button(s)), of the first transmitter you wish to control Channel 6 output, (Driver Priority 1) until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Channel 6 output, Driver Priority 1) 14. Within 10 seconds, press and release the valet program switch one time. (Siren emits 7 short chirps indicating channel 7 has been entered) 15 .Within 10 Seconds, Press and hold the unlock bu

ملخص المحتوى في الصفحة رقم 4

1. Enter the transmitter program mode of the receiver channel to be reprogrammed. Using any unused button or combination of buttons, push out the stored code by pressing the unused button until a long chirp is heard, then repeat 3 additional times. After this, you can add any desired unused transmitter button. This action erases only that particular receiver channel, all other codes will remain stored. 2. Enter the transmitter program mode. Using any transmitter button press and hold until

ملخص المحتوى في الصفحة رقم 5

3. Remove the discharged battery, making note of the location of the + and - contacts shown, and replace with a new type alkaline 1.5 volt AAA Battery. 4. Making note of the location of the (+) and (-) contacts, insert a new AAA battery alkaline 1.5 volt. 5. Replace battery cover being certain to close the battery case lock clip to prevent accidental opening. 5 of 6 128-6997

ملخص المحتوى في الصفحة رقم 6

ORDER FORM FOR TRANSMITTER 5BCR03 Attention: Transmitter Ordering Department Important: To help us expedite your order, please print all of the information legibly and mail this form and your payment according to the instructions below. 1) Name:___________________________________________ 2) Address:_________________________________________ 3) City:________________State:________Zip Code:__________ 4 Telephone Number:( )_____________________ 5) Total Number Of Transmitters Required:_______ Cost P