ملخص المحتوى في الصفحة رقم 1
TM
World-Class Auto Security
concept
50
Owner's Manual
In the unlikely event you ever experiencea problem that your local
Authorised Clifford Dealer cannot resolve for you, you may call our toll-
free emergency helpline at 0800 526708 during normal business hours,
or pager number 0399 721739 after-hours.
ملخص المحتوى في الصفحة رقم 2
All Concept Series systems are covered by one or more of the following Clifford Electronics USA patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215; 5,157,375, 5,467,070 and other patents pending
ملخص المحتوى في الصفحة رقم 3
Table of Contents Standard Features of the Concept 5O . . . . . . . . . . . . . . . . 2 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . . . 7 What each button/channel does . . . . . . . . . . . . . . . . . . . . . . . . . 7 AntiScan . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 4
Standard Features of the Concept 5O ✔ Thatcham-Evaluated— The Concept 50 complies with the British Insurance Industry’s Criteria for Vehicle Security as evaluated by Thatcham, the Motor Insurance Repair Research Centre. ✔ Lifetime Warranty— The system control unit and remote controls are covered for as long as you own the vehicle (see the warranty card for details). — Another patented Clifford ✔ FACT — False Alarm Control and Test innovation, FACT absolutely, positively puts an end to recurring
ملخص المحتوى في الصفحة رقم 5
Standard Features of the Concept 5O (cont.) ✔ Failsafe MultiPoint Autoimmobiliser— Automatically ensures that your vehicle is completely immobilised while you’re away. While armed, your Concept 50 electronically disconnects your vehicle’s ignition system, starter motor and electric fuel pump, making theft virtually impossible. What’s more, even if a thief were to tear the Concept 50 control unit out of your vehicle, he would still be unable to start the engine! And Clifford’s Failsafe circuitry
ملخص المحتوى في الصفحة رقم 6
Standard Features of the Concept 5O (cont.) ✔ Remote Door Locking/Unlocking— No more fumbling with keys in the dark or bad weather. A single press of remote control button 1 simultaneously arms the system and locks the doors, another press disarms and unlocks. AutoLock — Automatically locks the doors when the ignition is turned “on” AutoUnLock — Automatically unlocks when the ignition is turned “off” ✔ Patented Smart AutoTesting— Automatically tests all sensors and triggers every time you remot
ملخص المحتوى في الصفحة رقم 7
Standard Features of the Concept 5O (cont.) ✔ Channel 4 with Selectable Output Type— Your installer can set this accessory output to pulsed operation (for use with a remote controlled accessory such as a remote engine starter), latched on/off (to remotely operate your car audio system) or timed (for remote headlight activation or remote window/sunroof closure on certain vehicles). ✔ Smart Self-Powered Siren— Built-in battery keeps the siren wailing even if all wires are cut! Won’t drain your ca
ملخص المحتوى في الصفحة رقم 8
Welcome to the world of high-technology vehicle security and convenience ongratulations on the purchase of your Clifford Concept 50 Cremote controlled vehicle security and convenience system. Your Concept 50 is packed with protective features and lifestyle-enhancing convenience benefits, including Anti-CodeGrabbing with Random Code Encryption that fights off the latest and most onerous threat from high-tech thieves. A thief with a code-grabber can record with total impunity the codes of your car
ملخص المحتوى في الصفحة رقم 9
How to use your keychain remote control Your remote control can command 12 different functions and options. The LevelShift button on the side of the remote control allows you to select channels 5–12: To transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. For instance, to transmit channel 3, press button 3. While you transmit, the LED indicator will flash once every second: this indicates level 1. To transmit either channel 5, 6, 7 or 8: Press the LevelShift button once.
ملخص المحتوى في الصفحة رقم 10
TO ARM Press button 1/channel 1 once. You will hear two chirps and THE SYSTEM . . . . . . . the indicator lights will flash twice. The system LED will flash repeatedly and the vehicle’s doors will automatically lock. TO DISARM Press button 1/channel 1 again. One chirp and one indicator THE SYSTEM . . . . . . . light flash confirms disarming. The doors will automatically unlock and the interior lights will turn on and stay on for 30 seconds or until you start the engine, whichever occurs first.
ملخص المحتوى في الصفحة رقم 11
AntiScan Thieves can disarm some other brands of car alarms with a “scanner” that rapidly transmits one remote control code after another until it hits on the one that disarms the alarm. Clifford’s AntiScan detects any scanner and blocks the codes it generates. Anti-CodeGrabbing (ACG) with Random Code Encryption ACG protects you and your automobile from the most effective and onerous car stealing device ever used by car thieves — a code-grabber. Code-grabbers literally record, from hundreds of m
ملخص المحتوى في الصفحة رقم 12
UltraSecure Coded Valet Mode Your secret valet code In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your system. How? To enable valet mode, the driver must first enter a secret valet code on the PlainView switch. Your code will be a 1-to-3-digit number of your choosing. Each digit can be any number fr
ملخص المحتوى في الصفحة رقم 13
To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Flick the switch back to its centre position. The LED will turn off to confirm that the system is now in its normal operating mode. Setting your own secret valet code Since all Concept 50 systems have the same factory-set code, it is highly advisable that you set your own valet code. You may choose any 1-, 2-, or 3-digit code that does not have any zeros. You can also change the code whenever you want. 1
ملخص المحتوى في الصفحة رقم 14
Failsafe MultiPoint AutoImmobilisation Concept 50 has a multipoint AutoImmobiliser that, when active, will immobilise your vehicle by electronically interrupting the ignition, starter and fuel pump. AutoImmobilisation occurs 30 seconds after you turn off the ignition. It will also occur 30 seconds after disarming the system. AutoImmobilisation is completely independent of the alarm’s AutoArming feature. The dashboard LED will repeatedly flash slowly when the immobiliser is active, and rapidly wh
ملخص المحتوى في الصفحة رقم 15
How to interpret the chirps and indicator light flashes When you use the remote control, the system responds with chirps (unless the chirp muting feature is turned on) and indicator light flashes: Chirps and flashes Meaning 1 Your Concept 50 system is disarmed 2 Your Concept 50 system is armed 2 and then 4 Armed but one of the sensors is malfunctioning (see Smart AutoTesting on page 13) 3 Disarmed and there was an intrusion attempt (see Smart prior intrusion attempt on page 14) 4 Armed but the b
ملخص المحتوى في الصفحة رقم 16
Smart prior intrusion attempt alert If you hear three chirps (instead of the usual one chirp) upon disarming, it means the system sounded in your absence. When you enter the vehicle and turn on the ignition (or start the engine), the LED will flash several times, pause, then repeat the flash cycle 4 more times. Count the number of flashes in one cycle and refer to the chart on page 13. Smart Self-Powered Siren This siren has its own built-in back-up battery, so even if a thief cuts all the wires
ملخص المحتوى في الصفحة رقم 17
TotalRecall The system’s memory records the identity of the last activated or malfunctioning trigger or sensor. To identify the trigger and/or sensor held in the system’s memory: 1. With the ignition OFF, flick the PlainView switch to its latched side. 2. Press button 1/channel 1 to “arm” the system, then again to “disarm.” 3. The LED will flash 1–5 times, pause, then repeat the flash cycle 4 times. 4. Count the number of flashes in one cycle and refer to the chart below: LED flashes per cycle
ملخص المحتوى في الصفحة رقم 18
UltraSecure Coded Programming Mode Your Concept 50 vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just press the PlainView switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table that follows. To change any of the settings, use the procedure noted. To restore the feature to its factory setting, just repeat the pro
ملخص المحتوى في الصفحة رقم 19
Example To change the Lock upon AutoArming feature from its factory setting of off to on, you would do the following: Turn the ignition key to the ON position. Enter your programming code, then immediately tap and release the momentary side of the PlainView switch 4 times (you will hear a single chirp upon the 4th press). Wait 3 seconds. The system will sound one more chirp to confirm that the Lock upon AutoArming setting has been changed. Turn the ignition off. That’s all there is to it! Addin
ملخص المحتوى في الصفحة رقم 20
© Copyright Clifford Electronics, Inc., 1996 31-710D/UKC5om/496
