Audiovox APS-2K4MS دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Model APS-2K4MS
Programming Guide
The APS-800/875 Models have a configurable receiver that
allows the transmitter to be programmed to operate the Lock
Unlock functions with one transmitter button or with two transmitter
buttons (separate Lock/Unlock). In addition, the receiver also allows
driver priority function. This driver priority function takes place
when ever a particular transmitter is used to unlock the vehicle
regardless of the selection of one button or two button operation.
The fol

ملخص المحتوى في الصفحة رقم 2

TO ENTER THE PROGRAM MODE: 1. Turn the ignition switch to the “ON” position. 2. Within 10 seconds, Press and release the valet/program switch three times. (Siren emits 1 short chirp indicating channel 1 has been entered) 3. Within 10 Seconds, Press and hold the button of the first transmitter you wish to control the Lock&Arm feature of your security system until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Lock/Arm feature). 4. Within 10 seconds

ملخص المحتوى في الصفحة رقم 3

(Repeat this for each transmitter you wish to operate the Channel 4 output) 10. Within 10 seconds, press and release the valet program switch one time. (Siren emits 5 short chirps indicating channel 5 has been entered) 11. Within 10 Seconds, Press and hold any unused button(s) of the first transmitter you wish to control Channel 5 output, (Auxiliary Output 2) until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Channel 5 output) 12. Within 10 seco

ملخص المحتوى في الصفحة رقم 4

Enter the transmitter program mode: 1. Turn the ignition switch to the “ON” position. 2. Within 10 seconds, press and release the valet/program switch three times. (Siren emits 1 short chirp indicating channel 1 has been entered) 3. Within 10 Seconds, Press and hold the ARM or ARM/DISARM button of the first transmitter you wish to remain stored into the control unit until a single chirp is heard from the siren. (Repeat this for each transmitter you wish to remain stored in the control unit). The

ملخص المحتوى في الصفحة رقم 5

2. Enter the transmitter program mode. Using any transmitter button press and hold until a long chirp is heard. If a single chirp or mul- tiple chirps, (up to 7 chirps), are heard, the unit is indicating that the transmitter has already been programmed elsewhere in the receiver. Release the transmitter button and within 5 seconds press and hold until a long chirp is heard. This action forces the unit to erase all stored codes of that transmitter. The unit then exits the program mode the sire

ملخص المحتوى في الصفحة رقم 6

ORDER FORM FOR TRANSMITTER APS-2K4MS Attention: Transmitter Ordering Department Important: To help us expedite your order, please print all of the information legibly and mail this form and your payment according to the instructions below. Indicate the pad number of your transmitter selected from the pads shown above. 1) Pad Number: _____________________________________ 2) Name: __________________________________________ 3) Address: ________________________________________ 4) City: _____________