ملخص المحتوى في الصفحة رقم 1
2007
Utility Vehicles
Gasoline and Diesel
Owner’s Manual
HUV 4421G
HUV 4421GXP
HUV 4421D
HUV 4421DXP
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
NOTICE Warranty information appears on the last pages of this manual. No other warranties, express or implied, are contained herein. Your authorized representative checked the vehicle before it was delivered to you and will provide you a copy of the completed vehicle warranty registration form. Husqvarna is not liable for errors in this manual or for incidental or consequential damages that result from the use of the material in this manual. This manual contains proprietary information that is p
ملخص المحتوى في الصفحة رقم 4
FOREWORD Thank you for choosing Husqvarna, a world leader in outdoor products. You have chosen the finest utility vehicle on the market. Please protect your investment and ensure that your Husqvarna vehicle provides years of reliable, superior performance by reading and following the maintenance instructions in this manual. Your comfort and safety are important to us, so we urge you to read and follow the step-by-step operating instructions and safety procedures in this manual. These instruction
ملخص المحتوى في الصفحة رقم 5
TABLE OF CONTENTS Safety Details ............................................................................................................................................ 7 General Warnings ...................................................................................................................................... 8 General Information ................................................................................................................................... 10 Model Identific
ملخص المحتوى في الصفحة رقم 6
Vehicle Feature Identification ALL HUV 4421 MODELS DIESEL WARNING DECAL (DIESEL VEHICLES ONLY, GASOLINE WARNING DECAL ON PASSENGER-SIDE SEAT SUPPORT) (GASOLINE VEHICLES ONLY, ON PASSENGER-SIDE SEAT SUPPORT) OPERATING INSTRUCTIONS (ON INSTRUMENT PANEL) HOT MANIFOLD WARNING DECAL (ON ENGINE VALVE COVER) WINCH CABLE WARNING DECAL (FOR VEHICLES WITH WINCH ACCESSORY) FRAME GROUND WARNING DECAL (ON VEHICLE FRAME NEAR BATTERY) (ON FRONT BODY) HOT SURFACE WARNING DECAL (ON COOLANT PIPES AND UNDERSIDE
ملخص المحتوى في الصفحة رقم 7
Vehicle Feature Identification ALL HUV 4421 MODELS UNDERAGE WARNING DECAL ! WARNING • Do not modify or remove Roll-over Protective Structure (ROPS). � Replace ROPS if damaged. Do not attempt repair. � Use seat belts during operation. Do not jump from vehicle. � Keep away from drop-offs, steep slopes, and unstable surfaces. CCI 102961201 CERTIFICATION NOTICE AND W ARNING DECAL DRIVER/PASSENGER WARNING ROTATING PARTS DECAL - GAS DECAL (UNDER SEAT ON DRIVER-SIDE FRAME) ROTATING PARTS DECAL - DIE
ملخص المحتوى في الصفحة رقم 8
Vehicle Feature Identification Page 6 2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
ملخص المحتوى في الصفحة رقم 9
NEG POS Safety Details SAFETY DETAILS ý WARNING • This owner’s manual should be read completely before attempting to drive or service the vehicle. Failure to follow the instructions in this manual could result in property damage, severe personal injury, or death. It is important to note that some vital statements throughout this manual and on the decals affixed to the vehi- cle are preceded by the words DANGER, WARNING, or CAUTION. For your protection, we recommend that you take special notice o
ملخص المحتوى في الصفحة رقم 10
General Warnings GENERAL WARNINGS The following safety statements must be heeded whenever the vehicle is being operated, repaired, or ser- viced. Safety decal identification information is also included beginning on page 4. Other specific safety state- ments appear throughout this manual and on the vehicle. ý DANGER • Battery – Explosive gases! Do not smoke. Keep sparks and flames away from the vehicle and service area. Ventilate when charging or operating vehicle in an enclosed area. Wear a ful
ملخص المحتوى في الصفحة رقم 11
General Warnings ý WARNING • Only trained technicians should service or repair the vehicle. Anyone doing even simple repairs or service should have knowledge and experience in electrical and mechanical repair. The appropriate instructions must be used when performing maintenance, service, or accessory installation. • To avoid unintentionally starting the vehicle: - Disconnect battery cables, negative (–) cable first (Figure 1). - Gasoline vehicles only: Disconnect the spark plug wires from the s
ملخص المحتوى في الصفحة رقم 12
General Information GENERAL INFORMATION This manual includes operating procedures, maintenance, and regular servicing information for HUV 4421G, HUV 4421D, HUV 4421GXP, and HUV 4421DXP gasoline and diesel vehicles. All operating procedures, maintenance, and regular servicing are identical unless otherwise noted. MODEL IDENTIFICATION The serial number of each vehicle is printed on a bar code decal mounted on the frame above the brake pedal (Example: RC0601-123456) (Figure 3). There is also a seco
ملخص المحتوى في الصفحة رقم 13
Controls and Indicators 9 8 A 01/2 1 1 10 6 OPERATING INSTRUCTIONS 12 B OFF ON START C 14 15 11 13 7 4 1 5 3 2 Figure 4 Instrument Panel – Gasoline Vehicles 9 8 A 01/2 1 1 10 6 10 OPERATING INSTRUCTIONS B OFF PREHEAT ON START 12 C 15 11 13 7 4 5 1 3 2 Figure 5 Instrument Panel – Diesel Vehicles 2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual Page 11
ملخص المحتوى في الصفحة رقم 14
Controls and Indicators KEY SWITCH – GASOLINE VEHICLES The key switch (7) is mounted on the instrument panel to the right of the steering column (Figure 4, Page 11). It has three positions: OFF, ON, and START. To start the vehicle, place the Forward/Reverse handle in the NEUTRAL position and turn the key to the START position, and hold it there until the engine starts. Activate the choke (14) as necessary. If the engine does not start after 10-15 seconds, release the key and repeat the procedure
ملخص المحتوى في الصفحة رقم 15
Controls and Indicators BRAKE PEDAL The brake pedal (2) is located to the immediate left of the accelerator pedal (Figure 4 and Figure 5, Page 11). To slow or stop the vehicle, press the brake pedal. PARK BRAKE The park brake pedal (3) is located to the left of the brake pedal (Figure 4 and Figure 5, Page 11). To engage the park brake, first apply pressure to the brake pedal, then firmly press the park brake pedal until it latches into place. To disengage the park brake, pull the park brake rele
ملخص المحتوى في الصفحة رقم 16
Controls and Indicators LOW OIL WARNING LAMP The low oil warning lamp (9) is located on the instrument panel just to the left of the steering column (Figure 4 and Figure 5, Page 11). If the warning lamp lights up, oil should be checked and added to the engine as nec- essary before vehicle use continues. The vehicle should never be driven when the low oil warning lamp remains lit. If the warning lamp alternately lights and darkens, the vehicle may be driven, but oil should be added at the first o
ملخص المحتوى في الصفحة رقم 17
Roll-Over Protective Structure and Safety Belts ROLL-OVER PROTECTIVE STRUCTURE AND SAFETY BELTS All HUV 4421 vehicles are equipped with a Roll-Over Protective Structure (ROPS) and safety belts for each occupant. See following WARNING. ý WARNING • The ROPS must be properly installed before operating the vehicle. Husqvarna strongly urges that the vehicle’s occupants be properly restrained at all times with the safety belts provided. Pregnant woman: Consult your doctor for specific recommendations.
ملخص المحتوى في الصفحة رقم 18
Roll-Over Protective Structure and Safety Belts ý WARNING • After inserting the tab, make sure the tab and buckle are locked and that the belt is not twisted. • Loose fitting safety belts could increase the chance of injury due to sliding under the belt if sudden braking should occur. Keep the safety belt snug and positioned as low on the hip bone as possible. • Use a single safety belt for one person at a time. Do not use a single safety belt for two or more people – this includes children. • N
ملخص المحتوى في الصفحة رقم 19
Seat Latch and Adjustment 1 Figure 8 Adjust Headrests SEAT LATCH AND ADJUSTMENT The vehicle seat(s) are hinged to allow easy access to the engine compartment. To raise the seat bottom, grasp the rear side of the seat bottom, and pull firmly in a forward/upward direction. See following WARN- ING. ý WARNING • Make sure seat hinges and latches are securely engaged before operating the vehicle. Vehicles with bucket seat option: The driver-side bucket seat is adjustable and can be moved forward or
ملخص المحتوى في الصفحة رقم 20
Performance Inspection Use the following list as a guide to inspect the vehicle. This list should be used daily and in conjunction with the Performance Inspection and the Periodic Service Schedule on page 29 to ensure that the vehicle is in proper working condition. Any problems should be corrected by a Husqvarna dealer/distributor or a trained technician. • General: All the parts should be in place and properly installed. Be sure that all nuts, bolts, and screws are tight. Check hose clamps for
