Havis-Shields Jeep Cherokee C-TCB-9 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALL INSTRUCTIONS C-TCB-9
1989-2001 JEEP CHEROKEE

TOOLS REQUIRED:
3/16” Allen wrench Ratcheting wrench (3/8” drive)
3/8” Standard socket set Powered drill w/ 3/16” drill bit
3/8” Metric socket set Open-end wrench set

HARDWARE & COMPONENTS:
QTY DESCRIPTION PART #
1 Pole support assembly CM93071-9
1 Telescoping pole assembly CM93072-3
1 Side support brace CM93146
1 5/16” Flat washer GSM31006
1 5/16-18 Nylock nut GSM30017
2 ¼” x ¾”Hex head lag bolt GSM33060-1
Always!
R

ملخص المحتوى في الصفحة رقم 2

SUB ASSEMBLY: 1. Confirm receipt of all hardware and components. 2. Remove front inner and outer passenger seat bolts on vehicle. INSTALLATION: 1. Mount C-TCB-9 into vehicle: • Position pole support assembly between seat base mount and floor of vehicle • Align holes in pole support assembly with holes in seat base. • Loosely attached factory seat bolts that were removed during subassembly. • Mount side support brace to threaded rod located on pole support assembly using a 5/16-18