Viking F20196C EN دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Viking Installation Guide
Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-VIKING1 (845-4641)
or visit the Viking web site at
vikingrange.com
Microwave Built-In Trim Kit
F20196C EN (010708J)
TINSEB453MRRO

ملخص المحتوى في الصفحة رقم 2

IMPORTANT - PLEASE READ AND FOLLOW BASIC SPECIFICATIONS •Before beginning, please read these instructions completely and carefully. Microwave Oven Built-In Trim Kits •Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before installing the built-in trim kit. Remove VMOS200 VMTK270/271 VMTK300/301 VMTK360/361 the turntable from the oven cavity. •Because the kit includes metal parts, caution should be used in handling and installation to avoid the possibility of injur

ملخص المحتوى في الصفحة رقم 3

CABINET OR WALL CUTOUT CABINET INSTALLATION Cutout Dimensions 1. Place the oven adjacent to the wall or cabinet opening. Plug the power cord into the electrical outlet. Height (A) 2. Carefully guide the assembled oven into the prepared opening. Slide the oven on the Exhaust Duct Assembly. See Minimum 16 3/4” (42.5 cm) Illustration 3. Avoid pinching the cord between the oven and the wall. Adjust the position of the oven so that the Maximum 17” (43.2 cm) feet of the oven are fitted into th

ملخص المحتوى في الصفحة رقم 4

DMTK270 ONLY DMTK300 ONLY OVER OVEN INSTALLATION Position the BACK FRAME ASSEMBLY to be square with Position the BACK FRAME ASSEMBLY to be square with the oven. Carefully place the BACK FRAME ASSEMBLY the oven. Carefully place the BACK FRAME ASSEMBLY on the oven. Check that the oven is level and secure the on the oven. Check that the oven is level and secure the upper portion FIRST with two of the Screw B. Secure the lower portion FIRST with two of the Screw B. Adjusting the BACK FRAME ASS