Tripp Lite APSX6048VRNET دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Tripp Lite

1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: APSX6048VRNET
PowerVerter® APS X Series 6000W Inverter/Charger with Auto-Transfer Switching and Line Interactive Voltage
Regulation

Highlights
48V DC or 208/230V (selectable) AC input; 208/230V, 50/60 Hz, pure sine
wave output (hardwired)
6000 watts continuous, 9000 watts OverPower and 12000 watts DoubleBoost
inverter output
3-stage, 23/90 amp selectable wet/dry cell bat

ملخص المحتوى في الصفحة رقم 2

Automatic overload and thermal (overheating) shutoff Front panel remote control connector enables remote off/on switching (APSRM4 sold separately) Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change Automatic Generator Starter jack enables user configuration of automatic generator start-up as inverter batteries drop to 23.0 VDC and generator shutoff as inverter batteries are recharged to 28.2 VDC.

ملخص المحتوى في الصفحة رقم 3

DC system voltage 48 (VDC) Battery Pack 98-121 sealed lead acid battery (optional) Accessory (optional) Battery recharge Selectable 23 / 90 amp rate VOLTAGE REGULATION Voltage regulation Includes automatic voltage regulation to correct brownouts and over-voltages back to usable levels description Overvoltage Over-voltages are automatically reduced by 10% correction Brownout Brownouts are automatically boosted by 10% and 20% correction LEDS ALARMS & SWITCHES Switches 3 position on/off/remote swit

ملخص المحتوى في الصفحة رقم 4

Low voltage In 230V AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 170V AC (user adjustable transfer to battery to 180V). In 208V AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 165V (user power adjustable to 175V)-see manual High voltage In 230V AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 260V (user adjustable transfer to battery to 270 - see manual), In 208V AC "auto" mode, inverte