ملخص المحتوى في الصفحة رقم 1
TREVISO Sleek Weather Station
Model: BAR988HGA / BAR986HGA
USER MANUAL
BAR988HGA English Cover R5 1 9/18/04, 2:55 AM
ملخص المحتوى في الصفحة رقم 2
Switch Clock Display ........................................... 15 TREVISO Sleek Weather Station Alarms ..................................................................... 15 Model: BAR988HGA / BAR986HGA Set Daily Alarm .................................................... 15 USER MANUAL Set Pre-Alarm ...................................................... 16 Activate Alarm ...................................................... 16 CONTENTS Snooze ................................................
ملخص المحتوى في الصفحة رقم 3
Backlight ................................................................. 22 Reset System ......................................................... 22 Safety and Care ...................................................... 22 Warnings ................................................................. 22 Troubleshooting ..................................................... 23 Specifications ......................................................... 23 About Oregon Scientific ......................
ملخص المحتوى في الصفحة رقم 4
Keep this manual handy as you use your new product. INTRODUCTION It contains practical step-by-step instructions, as well TM Thank you for selecting the Oregon Scientific as technical specifications and warnings you should BAR988HGA / BAR986HGA TREVISO Sleek Weather know. Station. This powerful device bundles time keeping, weather monitoring, indoor and outdoor temperature and humidity readings, barometric trends and altitude adjustment, into a single tool you can use from the convenience of you
ملخص المحتوى في الصفحة رقم 5
PRODUCT OVERVIEW FRONT VIEW 1. LCD display 2. MODE: Change settings / display 1 3. MEMORY: View current, maximum and minimum 2 temperature / humidity / UV readings 7 4. HISTORY: View historical barometer and UV readings 3 5. ALARM / : View alarm status; set alarm 8 6. SNOOZE / LIGHT: Activate 8-minute snooze or backlight 4 7. SELECT: Switch Areas 9 8. CHANNEL: Switch remote sensor display 9. UP: Increase setting / activate atomic clock 5 10 10. DOWN: Decrease setting / deactivate atomic clock
ملخص المحتوى في الصفحة رقم 6
BACK VIEW 1. Ventilation holes 2. Battery compartment (bottom) 3. AC adaptor socket 1 4. °C / °F switch (in battery compartment) 5. RESET button (in battery compartment) 6. mb / inHg switch (in battery compartment) You can adjust the angle of the clock display as shown below: 3 2 4 5 6 5 BAR988HGA English R5 5 9/18/04, 3:00 AM EN
ملخص المحتوى في الصفحة رقم 7
LCD DISPLAY 1. Weather Forecast Area: Animated weather forecast 2. Temperature / Humidity / Comfort Zone Area: Readings and trend lines; comfort zone; sensor channel number 1 3. UVI / Barometer Area: UV level and barometric pressure bar chart; UV Index and barometric readings 4. Clock / Alarm / Calendar Area: Atomic clock; alarms; calendar 2 3 4 6 BAR988HGA English R5 6 9/18/04, 3:00 AM EN
ملخص المحتوى في الصفحة رقم 8
Weather Forecast Area Temperature / Humidity / Comfort Zone Area 6 1 7 1 2 2 3 8 9 4 10 5 3 11 1. Selected Area icon 2. Temperature trend 3. Channel number (1-5) / reception status 1. Low battery icon for main unit 4. Low battery icon for remote sensor 2. AC adaptor icon - displays when unplugged 5. Humidity trend 3. Weather display 6. MAX / MIN temperature 7. Temperature - °C / °F 8. Heat Index 9. MAX / MIN humidity 10. Humidity 11. Comfort levels 7 BAR988HGA English R5 7 9/18/04, 3:00 AM EN
ملخص المحتوى في الصفحة رقم 9
UVI / Barometer Area Clock / Alarm / Calendar Area 1 2 1 3 6 2 8 4 7 5 3 4 9 1. Pre-Alarm is set 5 10 11 2. Pre-Alarm display / Pre-Alarm setting 12 3. Channel with atomic clock reception is locked 6 4. Atomic clock reception icon 7 5. Daily Alarm is set 1. Barometric pressure is showing 6. Offset time-zone 2. UV is showing 7. Time / date / calendar 3. Low battery icon for UV sensor 4. UVI value is showing 5. UV exposure time countdown has started 6. UV index level 7. UV exposure time for user 8
ملخص المحتوى في الصفحة رقم 10
REMOTE SENSOR (RTGR328NA) 1 5 2 1 3 6 2 7 4 8 1. Signal reception 3 2. US time zone 3. Channel number 4. Low battery icon 5. Time 6. Temp (°C or °F) 1. LCD display 7. Humidity % 2. LED status indicator 8. Temp / Humidity 3. Ventilation duct 9 BAR988HGA English R5 9 9/18/04, 3:00 AM EN
ملخص المحتوى في الصفحة رقم 11
GETTING STARTED BATTERIES Batteries are supplied with this product: 1 • Main unit 4 x UM-4 (AAA) 1.5V 2 • Remote unit 2 x UM-3 (AA) 1.5V 3 4 5 Insert batteries before first use, matching the polarity as 6 shown in the battery compartment. For best results, install batteries in the remote sensor before the main unit. Press RESET after each battery change. 7 To install the main unit batteries: 8 1. Wall mount 2. CHANNEL switch (1-5) 3. RESET 4. °C / °F 5. SEARCH NOTE Do not use rechargeable batter
ملخص المحتوى في الصفحة رقم 12
NOTE It is recommended that you use alkaline CHANGE SETTINGS batteries with this product for longer performance. 1. Press SELECT to switch between Areas. indicates the selected Area. UNIT LOCATION Main Weather Forecast Area Remote Temperature / Humidity Area UV Sensor UVI / Barometric Pressure Area NOTE The UV Sensor is an optional item. AC ADAPTOR (MAIN UNIT) The batteries serve as a back-up power supply. For 2. Most Areas have alternate display options continuous use, please install the AC
ملخص المحتوى في الصفحة رقم 13
The RTGR328NA Sensor collects and transmits To fold out the stand: temperature and humidity information, along with time and date information. Time and date information is obtained by synchronizing with radio broadcasted atomic clock information from the National Institute of Time 1 located in Boulder Colorado. For more information on the Atomic Clock, please visit www.nist.gov 2 SET UP THERMO / HYGRO SENSOR (RTGR328N) 1. Open the battery compartment with a small Phillips screwdriver. 2. Insert
ملخص المحتوى في الصفحة رقم 14
NOTE The transmission range may vary and is subject SEARCH FOR SENSOR to the receiving range of the main unit. To search for a Thermo / Hygro sensor, press SELECT to navigate to the Temperature / Humidity Area. will You may need to experiment with various locations to show next to the Area. Then, simultaneously press and get the best results. hold MEMORY and CHANNEL for 2 seconds. SENSOR DATA TRANSMISSION To search for the UV sensor, press SELECT to navigate to the UVI / Barometer Area. wi
ملخص المحتوى في الصفحة رقم 15
ATOMIC CLOCK ICON MEANING The RTGR368NA remote sensor collects time and The unit has lost contact with the temperature information and transmits this back to the remote sensor but the time is main unit. The current time and date is received by radio synchronized. signal from the Atomic Clock broadcast located in Boulder, The unit has lost contact with the Colorado. For more information on the Atomic Clock, remote sensor and the time is not please visit www.nist.gov synchronized. The unit cannot
ملخص المحتوى في الصفحة رقم 16
Atomic clock disabled: NOTE The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish. The language you select determines the weekday display. SWITCH CLOCK DISPLAY Press SELECT to navigate to the Clock Area. will show next to the Area. SET CLOCK The BAR988HGA / BAR986HGA and the RTGR368NA should automatically set and update the time, as Press MODE to toggle between: necessary. However, if you are too far away from an Atomic Clock broadcast signal, or the produ
ملخص المحتوى في الصفحة رقم 17
2. Press ALARM / to view the alarm. (AL will show 5. Press ALARM / to confirm. at the top.) 3. Press and hold ALARM / for 2 seconds. shows when the Pre-Alarm is set. 4. Select the hour and minute. Press UP or DOWN to change settings. NOTE The Daily Alarm will NOT function until the next day if the Pre-Alarm has been triggered. Also, if you 5. Press ALARM / to confirm. deactivate the Daily Alarm, the Pre-Alarm is 6. The Daily Alarm icon will appear when the alarm automatically deac
ملخص المحتوى في الصفحة رقم 18
VIEW BAROMETER AREA Press SELECT to navigate to the Barometer Area. If is NOT shown, press MODE. Barometric data is shown in 2 areas at the bottom of the display. The upper area shows a 24-hour bar chart. The lower area shows current and historical readings. BAR CHART DISPLAY The bar chart visually shows atmospheric changes from the current hour (0) to 24 hours prior (-24). SELECT MEASUREMENT UNIT Slide the mb / inHg switch (in the clock battery SET ALTITUDE compartment), to change the displa
ملخص المحتوى في الصفحة رقم 19
3. Press UP or DOWN to set the altitude in 33-foot ICON DESCRIPTION increments (-328 ft to 8202 ft). Cloudy 4. Press HISTORY to confirm. Rainy WEATHER FORECAST This product forecasts the next 12 to 24 hours of weather within a 19-31 mile (30-50 km) radius. The forecast is based on barometric pressure trend readings. Snowy NOTE The night time icon displays from 6 PM to 6 AM. When the Channel 1 Sensor records a temperature of 35.6°F (2°C) or lower, the RAINY icon becomes SNOWY. The top area shows
ملخص المحتوى في الصفحة رقم 20
UV data is shown in the same area as the Barometer. 2. Press CHANNEL to select user 1-4. Press SELECT to navigate to the Barometer Area, then 3. Press and hold MODE for 2 seconds to enter the press MODE to display the UV icon and data. Skin Type Setting Mode of the selected user. 4. Press UP or DOWN to choose 1 of the 4 skin type NOTE Refer to the UVR138A User Manual for more settings. Then press MODE to confirm and enter the information and see below to learn about the new SPF Set Up Mode.
