Aprilaire 8051 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Model 8051 Flush Mount Sensor
Installation Instructions
IntroductIon
®
The 8051 is a temperature sensor. It can be used to remotely measure temperature with compatible Aprilaire thermostats and support modules.
InStallatIon InStructIonS
1. Select a location for mounting the sensor. The following table shows the correct resistance at various ambient
temperatures without the sensor wires attached to a thermostat or
Locate the sensor as you would locate a thermostat.
support module.

ملخص المحتوى في الصفحة رقم 2

® aprIlaIre Model 8051 FluSh Mount SenSor InStallatIon InStructIonS Step 1: Use a 1” paddle bit to drill a 1” dia. hole in the drywall/sheetrock. Keep the drill steady and horizontal to ensure a clean finished hole. 1” 1.00” Step 2: Wire nut the sensor to cable run between the flush mount sensor and the thermostat or support module. Press the sensor into the 1” hole after the wires are connected. IMportant : Do not spackle o