ملخص المحتوى في الصفحة رقم 1
HJZTP/HJZTPX
Joystick Controller for
PTZ Cameras, DVRs, and Multiplexers
User Manual
900.0570 – September 2005 – Rev. 1.01
ملخص المحتوى في الصفحة رقم 2
ISSUE DATE REVISIONS HJZMU001150 A March 2005 Initial Release. B July 2005 Revised Model # (ECI 2003) 900.0570 1.00 August 2005 Revised Model # Revised cable qty. in package contents and added operation 1.01 September 2005 with KD6i/HD6i in Maxpro Mode (EC03566) Rev. 1.01 ii 900.0570 8-Sept-05
ملخص المحتوى في الصفحة رقم 3
FCC COMPLIANCE STATEMENT Information to the User: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful inte
ملخص المحتوى في الصفحة رقم 4
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS – All safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS – The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS – All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS – All operating and use instructions should be followed. 5. CLEANING – Unplug the unit from the outlet before cleaning. Do not use liquid cleaners
ملخص المحتوى في الصفحة رقم 5
IMPORTANT SAFEGUARDS 14. DAMAGE REQUIRING SERVICE – Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an im
ملخص المحتوى في الصفحة رقم 6
Prior to installation and use of this product, please observe the following cautions and warnings. CAUTION C A U T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNINGS WARNING: Installation and servicing must be performed by qualified personnel in accordance with current IEE wiring regulations. WARNING: The PSU must be wired to a double pole
ملخص المحتوى في الصفحة رقم 7
TABLE OF CONTENTS SECTION 1: INTRODUCTION ................................................................................................................ 1 1.1 PRODUCT DESCRIPTION ............................................................................................................... 1 1.2 COMPATIBLE PRODUCTS .............................................................................................................. 1 1.3 PACKAGE CONTENTS................................................
ملخص المحتوى في الصفحة رقم 8
TABLE OF CONTENTS, CONTINUED 4.6 DVR SELECTION ..........................................................................................................................18 4.7 RECORDING AND PLAYBACK ...................................................................................................... 19 4.8 ALARM FUNCTION........................................................................................................................ 20 4.9 SPOT FUNCTION....................................
ملخص المحتوى في الصفحة رقم 9
TABLE OF CONTENTS, CONTINUED 6.9.8 To Stop a Tour of Presets..............................................................................................30 6.9.9 To Restart a Tour of Presets..........................................................................................30 6.10 ENHANCED FUNCTIONS.............................................................................................................. 30 6.10.1 Home ...................................................................
ملخص المحتوى في الصفحة رقم 10
TABLE OF CONTENTS, CONTINUED 8.3 CONTROLLING SCAN ASSEMBLIES............................................................................................ 41 8.4 FREEZE / UNFREEZE VIDEO ........................................................................................................41 8.5 FLASHBACK OPERATION.............................................................................................................41 8.6 PRESHOTS..............................................................
ملخص المحتوى في الصفحة رقم 11
SECTION 1: INTRODUCTION 1.1 PRODUCT DESCRIPTION The HJZTP Keyboard can control DVRs, multiplexers, and PTZs using Honeywell VCL (Orbiter/RapidDome) or Honeywell Diamond (KD6/HD6) protocol. It can control systems with up to a maximum of 128 PTZ cameras, 99 DVRs, and 32 multiplexers (using RS485 distribution boxes such as the HDCD8TP). Up to four HJZTP keyboards can be connected together to providing a system controlled by one (1) master keyboard, and three (3) slave keyboards. RapidDome/Orbiter d
ملخص المحتوى في الصفحة رقم 12
1.3 PACKAGE CONTENTS Quantity Description 1 HJZTP or HJZTPX Joystick Controller 1 HJZMU001150 User Manual 1 120 VAC to 12VDC 300mA power supply (HJZTP) or 230 VAC to 12VDC 300mA power supply (HJZTPX) 2 Cable, 8-Way RJ45 Connector on both ends (connect between keyboards and DVRs/Multiplexers) 1 Cable, RJ45 connector one end and fly leads with green wire and blue wire on other end 1 Cable, 8-Way RJ45 Connector one end and fly lead with white/orange and orange wires on other end Rev. 1.01 2 900.057
ملخص المحتوى في الصفحة رقم 13
SECTION 2: INSTALLATION 2.1 CONNECTIONS All connections to and from the keyboard are made to the RJ type connectors located on the rear panel of the unit. Figure 1: HJZTP Rear Panel Connector Function KBD Master keyboard – To connect to a slave keyboard. (RS485) Slave keyboard – To connect to a higher number slave keyboard. VCL dome data input to master keyboard or last slave keyboard. AUX Master keyboard – To connect either to a DVR or a multiplexer. (RS485) slave keyboard – To connect either t
ملخص المحتوى في الصفحة رقم 14
2.2 SUPPLIED CABLES 2.2.1 Eight-Way RJ45 Connector to Eight-Way RJ45 Connector This cable is used to connect a slave keyboard to a master keyboard, a slave keyboard to a slave keyboard, and a master keyboard to a multiplexer. 2.2.2 Eight-Way RJ45 Connector to White/Orange Wire and Orange Wire This cable is used to connect the master keyboard to the domes RS485 connection. The orange/white wire is data +, and the orange wire is data -. 2.2.3 Eight-Way RJ45 Connector to Green Wire and Blue Wire Th
ملخص المحتوى في الصفحة رقم 15
2.3 DOME CONNECTIONS 2.3.1 Daisy chain Figure 4. DOME DAISY CHAIN CONFIGURATION Rev. 1.01 5 900.0570 8-Sept-05
ملخص المحتوى في الصفحة رقم 16
2.3 DOME CONNECTIONS, CONTINUED 2.3.2 Star Wiring Configuration Note: Details on termination and dome installation are covered in the dome manual. Figure 5. DOME STAR WIRING CONFIGURATION Rev. 1.01 6 900.0570 8-Sept-05
ملخص المحتوى في الصفحة رقم 17
2.4 DVR AND MULTIPLEXER CONNECTION 2.4.1 DVR Setup The DVR unit ID and RS485 port settings must be correctly set using the menus on the DVR before it can be controlled using the HJZTP keyboard. Baud Rate - 9600 Parity - None Data – 8 Stop – 1 Usage - Remote control Unit ID - 1 for DVR 1, 2 for DVR 2 etc. 2.4.2 Multiplexer Setup The multiplexer address and communication settings must be correctly set using the menus on the multiplexer before it can be controlled using the HJZTP keyboard. Network
ملخص المحتوى في الصفحة رقم 18
2.5 KEYBOARD CASCADING It is possible to cascade up to three slave keyboards off a master keyboard that is connected to the multiplexer / DVR and dome RS485 line. All keyboards in the cascade can communicate with any DVR, multiplexer, or dome connected to the master. 2.5.1 Master/Slave Connection A system of cascaded keyboards is connected as shown below. Figure 7. SAMPLE SYSTEM OF CASCADED KEYBOARDS. In the above system two slave keyboards are connected to a master keyboard. The system also has
ملخص المحتوى في الصفحة رقم 19
2.6 CONNECTOR PIN ASSIGNMENTS Viewed from wiring input side of plug Figure 2. KBD/AUX/CONTROL CONNECTORS KBD Pin Signal Usual colour 1 To slave D+ White / Orange 2 To slave D- Orange 4 From slave or VCL data in D- Blue 5 GND White / Blue 6 From slave or VCL data in D+ Green AUX Pin Signal Usual colour 1 From master D+ White / Orange 2 From master D- Orange 4 To DVR or master D- Blue 5 GND White / Blue 6 To DVR or master D+ Green CONTROL Pin Signal Usual colour 1 To / from dome D+ White / Orange
ملخص المحتوى في الصفحة رقم 20
2.6 CONNECTOR PIN ASSIGNMENTS, CONTINUED Viewed from wiring input side of plug Figure 3. POWER CONNECTOR POWER Pin Signal Usual colour 1 GND Green 4 +12 VOLTS Red Rev. 1.01 10 900.0570 8-Sept-05
