Greenheck Fan SP-B دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

PN 455480
READ AND SAVE THESE INSTRUCTIONS
Model SP-B
Model CSP-B
®
Ceiling Exhaust and Inline Fans
Installation, Operation and Maintenance Manual
Prepare the Fan
1. If power assembly (motor and wheel) is not installed in housing, insert
the electrical plug into fan socket, then slide wheel end of power
assembly into fan housing and rotate clockwise until it is positioned
under tabs. Align the holes and attach by using two sheet metal
screws provided, shown in Fig. 1.
Ceiling Radiation Damper

ملخص المحتوى في الصفحة رقم 2

Installation Recommendations Install the Fan - continued 3. Slide ductwork over the fan’s discharge collar and securely attach it with sheet metal screws. Make sure the screws do not interfere with damper operation. Check damper to make sure it opens freely. Wire the Fan 1. Remove wiring cover. If fan/light combination is being used, make sure the fan plug is connected to the fan receptacle and the light plug is connected to the light receptacle, shown in Fig. 8. Using proper wire connectors