ملخص المحتوى في الصفحة رقم 1
Portable Air Conditioner
PAC8000S
Owner’s Manual
For more information on other great EdgeStar products on the web, go to http://www.edgestar.com
ملخص المحتوى في الصفحة رقم 2
Important Safety Information Improper handling can cause serious damage to the appliance and/or to the user. Please read the following safety information. Electrical Safety This unit is designed for indoor use only. Do not use the unit in extremely humid or wet environments. Do not spray water and wet the housing or control panel. Do not pull the unit by the cord. Always turn the unit off and unplug it from the outlet when cleaning. Unplug the unit if it is not going to
ملخص المحتوى في الصفحة رقم 3
Table of Contents IMPORTANT SAFETY INFORMATION ................................................................. I INTRODUCTION ................................................................................................... 1 PARTS IDENTIFICATION ..................................................................................... 2 BACK VIEW .......................................................................................................... 2 FRONT VIEW ........................
ملخص المحتوى في الصفحة رقم 4
Introduction Thank you for purchasing this EdgeStar portable air conditioner. We are glad you chose us. We believe that your purchase of this product opens a relationship between you and EdgeStar. We will provide the customer support needed to nurture that relationship. This manual contains important information regarding the proper installation, use and maintenance of your portable air conditioner. Following this manual will ensure that your product will work at its peak performa
ملخص المحتوى في الصفحة رقم 5
Parts Identification Front View Front Air Vent Handle Front Control Panel Front Grille / Air Intake Notes: You must open the front air vent when operating the unit. The unit is designed to blow air mostly from the right side. Back View Exhaust Power Cord Drain Caster KoldFront Portable Air Conditioner 2
ملخص المحتوى في الصفحة رقم 6
Installing the Carbon Filter Your portable air conditioner ships with a pre-filter and an activated carbon filter. The carbon filter will help remove contaminates and odors from the air. It is recommended you replace the carbon filter every two to three months, or as needed. It is necessary to clean the pre-filter periodically. Follow the steps below to install the carbon filter: Pre-filter CAUTION: Never operate the air conditioner without the pre-filte
ملخص المحتوى في الصفحة رقم 7
Window Kit Installation Instructions You must vent your portable air conditioner when running in it Preparations for installing cooling mode. Your unit includes a window exhaust kit that can be the window kit used to vent the unit out a window. Before you begin, make sure you have all the parts necessary for installation. Window Kit Parts List: NOTE: Exhaust Covers 4 Screws 1 Grated Adapter may be attached to the Grated Adapters. You may need to twist and pull a
ملخص المحتوى في الصفحة رقم 8
Installing the grated adapter 1. Insert the round grated adapter through the back grooved side of the window kit plate with hole. 2. Secure the grated adapter by fastening the screws from flat side of the window kit plate to the holes on the grated adapter. 5
ملخص المحتوى في الصفحة رقم 9
Installing the window plates 3. Open your window and place the window kit with grooved side facing outward on the window sill. Then, slide the window kit plate to fit the width of the window. You can use screws to secure the window kit plate from sliding. 4. Lower the window to secure the window kit in place. You CAUTION: Secure your may need to use duct tape to better secure the window
ملخص المحتوى في الصفحة رقم 10
20” Attaching the duct connectors to the exhaust hose A. B. 5. Attach the connectors to the hose: A. Extend the ends of the exhaust hose B. Thread the duct connector on by turning it clockwise until it stops. 6. Roll the unit towards the window kit. Leave a space that is at least 20 inches to the wall. 7
ملخص المحتوى في الصفحة رقم 11
Connecting the duct connector to the unit 7. Align the slots on the duct connector to the tabs and snap into the back of the unit. Connecting the duct connector to the grated adapter 8. Align the slots on the duct connector to the tabs on the grated adapter and snap in place. After you have installed the exhaust hose and window kit, you can plug in your portable air conditione
ملخص المحتوى في الصفحة رقم 12
Your portable air conditioner is designed to exhaust condensate Notes about the Exhaust water that is collected from the air. This water, in either gaseous or hose droplet form, will be expelled out the exhaust port of the unit. Please take this into account when deciding how to vent it. 1. The exhaust hose supplied with the portable air conditioner can be extended up to 48 inches; however for maximum efficiency, use the shortest length possible. 2. Try to prevent any kinks or b
ملخص المحتوى في الصفحة رقم 13
Control Panel Overview Power Button Remote Control Sensor LCD Display Power Mode Water Water Full Indicator Light Mode Indicator Light Function The LCD can display the ambient LCD Display temperature, set temperature, and the number of hours when setting the timer. Changes color to indicate if unit is in: Cool mode (Blue Light), Mode Indicator Light Dehumidify (Amber Light), or Fan Only mode (Green Light). Power Button Powers the unit on or off. The water light will turn on if
ملخص المحتوى في الصفحة رقم 14
Using the Control Panel The LCD Display will show the ambient temperature by default. LCD Display Pressing the Up and Down buttons on the remote control will show the set temperature for 15 seconds, and then revert to the room temperature. You can switch between Fahrenheit and Celsius by pressing the C/F button on the remote control. The displayed range of the ambient temperature is from 0º to 99º. Temperatures above 99º will be displayed as “Hi”, and temperatures below 0º will be di
ملخص المحتوى في الصفحة رقم 15
Remote Control Overview The remote control is used to operate all of your portable air conditioner’s functions. Power Button Mode Button POWER Speed Button Up and Down NOTES: Be careful not drop Buttons Timer Button the remote control. Do not Celsius / Cancel Button place the remote control in Fahrenheit Button a location exposed to direct sunlight. Button Function Power Powers the unit on or off. Mode Changes between cool, dehumidify and fan modes. Speed Sets the fan speed
ملخص المحتوى في الصفحة رقم 16
Operating the Remote Control Use the Power button to turn the portable air conditioner on and off. Power By default when you first use the power button, the unit will begin to operate in cooling mode. The unit will remember the last used mode/settings if you shut down and restart. Auto-Restart: If power to the unit is interrupted, the air conditioner will restart itself in its last used mode/settings once power is restored. The compressor will restart after 3 minutes. Cooling
ملخص المحتوى في الصفحة رقم 17
Operating the Remote continued Fan Only mode is used to circulate the air in your room. No Fan Only Mode temperature setting is needed. To operate the unit in Fan Only mode: 1) Make sure the power cord is plugged into a power outlet. 2) Press the Power button on the remote. 3) Press the Mode button until the Mode indicator light turns green. NOTE: Fan Only mode 4) Press the Speed button to select the fan speed. You can choose does not require that the between High, Medium and L
ملخص المحتوى في الصفحة رقم 18
Energy Saving Guide Read and follow the guide below to get the best performance and efficiency from your portable air conditioner: Do not cover the air outlet (exhaust) while in use. Do not place the unit in front of curtains or drapes- to ensure they do not obstruct the air intake. Minimize the length of the exhaust hose. Make sure the exhaust hose is as straight as possible and avoid kinks or bends. Keep curtains, blinds or drapes closed during the sunniest part of the da
ملخص المحتوى في الصفحة رقم 19
Maintenance Clean the air conditioner and filters regularly to maximize performance and efficiency, and prolong the unit’s life. Be sure to always unplug the air conditioner from the power outlet before cleaning. Cleaning the unit Use a soft dry cloth to wipe the body clean. If necessary, use lukewarm water to dampen a cloth to clean the unit. Use a soft bristle brush to clean between the vents. Carefully use a vacuum cleaner to clean the condenser coils. Never use abrasive chem
ملخص المحتوى في الصفحة رقم 20
Troubleshooting Follow the troubleshooting guide below to resolve common issues. Issue Possible Cause Solution My air conditioner is Unit is not receiving Make sure the unit is not functioning at all. power. plugged in to a grounded outlet. LCDI power cord is Press the Reset button tripped. on the LCDI cord. Insufficient power. Move the unit to another outlet. Check your circuit breaker. (Refer to the rating label on the back of the unit to determine the Amperage draw). Water re
