Havis-Shields C-3330-800 MW-800 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALL INSTRUCTIONS
C-3330-800 MW-800 FIXED MONITOR MOUNT
1996-2006 FORD CROWN VICTORIA

TOOLS REQUIRED:
Power Drill Phillips and Standard screwdriver set
Drill Bit Set – 1/8” through 3/8” Wire Cutters
3/8” and ¼” Drive Standard And Metric Wire Strippers
Socket Sets W/6” Extensions Wire Crimping Tool
3/8” and ¼” Ratchets Standard And Metric Wrench Sets

HARDWARE:
QTY DESCRIPTION PART #
6 #8 X 1 ½” Black sheet metal screws GSM33136
4 10-32 X 2 ½” Machine screws GSM33122
4 10-3

ملخص المحتوى في الصفحة رقم 2

INSTALLATION: A. DISASSEMBLE DASHBOARD: 1. Remove long dash trim. This is trim piece that contains trunk release and rear defroster switch. 2. Pull AM/FM radio, HVAC controls, and trunk release button. 3. Remove 7mm Hex Head Screws located above speedometer control, and below AM/FM Radio. Note: This will ease installation of Monitor Mounting Bracket. Do not unplug HVAC controls. Lay HVAC controls gently on floor of car. B. INSTALLING DASH MOUNT SUPPORT BRACKETS: 1. Run power