ملخص المحتوى في الصفحة رقم 1
VBP500
PORTABLE 5" LCD MONITOR & DVD PLAYER
ملخص المحتوى في الصفحة رقم 2
Notice: This Product incorporates copyright protection technology that is pro- tected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights own- ers. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited view- ing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. An LCD panel a
ملخص المحتوى في الصفحة رقم 3
A. Introduction Thank you for selecting the VBP500 portable DVD player in a bag. The main features include a 5" Screen (4:3 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD player. The unit applies the latest state of the art electronics and is designed for use in ho- tels, offices or your home. The unit is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy installation.
ملخص المحتوى في الصفحة رقم 4
5. Cleaning Unit When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the system only. 6. Disc Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction. Do not stick pa- per, tape or glue on the disc. Do not expose the disc to direct sun- light or heat sources such as hot air ducts. Do not touch the sur-
ملخص المحتوى في الصفحة رقم 5
2. Powering the system in a car Plug one end of the cigarette lighter adapter into the DC 9V jack on the unit, then plug the other end into the cigarette lighter socket. Figure 1 3. Powering the system with optional rechargeable Battery Please refer to L. * Rechargeable Battery Installation and Use (Page 33 to page 35). * Rechargable Battery Pack No. VBB5058 is OPTIONAL E. Installation Prior to installation Make sure that the unit is placed into the bag with the clear plastic coveri
ملخص المحتوى في الصفحة رقم 6
1.Installing the System onto the seat back in a car (Refer to Figure 2) Seat Standoff Figure 2 1). Take one of the supplied straps from the carrier bag. Connect the latch to one of the upper metal rings on the mounti ng bag. Connect the “S” hook to the other upper metal ring and place the loop over the headrest. Adjust the strap until the bag is firmly secured. 2). Take another strap from the carrier bag, and connect the latch to the lower metal ring on the left side of the bag. Attach the “S”
ملخص المحتوى في الصفحة رقم 7
2. Installing the system between the driver/passenger seat (Refer to Figure 3) Figure 3 1). Take one strap and connect the latch to the upper metal ring on the left side of the bag. Attach the “S” hook to the same ring after looping the strap around the headrest of the driver’s seat. Repeat this process for the right side (Passenger Seat). 2). Take another strap and connect the latch to lower metal ring on the left side of the bag. Attach the “S” hook to the same ring after looping the strap ar
ملخص المحتوى في الصفحة رقم 8
F. Controls, Indicators, and Connectors 1. Unit View (Refer to Figure 4) Figure 4 1) Press-to-Close Button on Disc cover 2) Open Button 3) Previous Button 4) Stop Button 5) Next Button 6) Play Button 7) Display Button 8) Pause Button 9) IR Transmitter 10) Remote Control Sensor 11) DVD Video Output Jack 12) DVD Audio Output Jack 13) Video Input Jack 14) Audio Input Jack 15) IR Switch 16) Brightness +/- Thumbwheel 17) Volume +/- Thumbwheel 18) Headphone Jack 1 19) Headphone Jack 2 20) Power O
ملخص المحتوى في الصفحة رقم 9
2. Remote Control View (Refer to Figure 5) 1) DISPLAY Button 2) ANGLE Button 3) SUBTITLE Button 4) AUDIO Button 5) ZOOM Button 6) UP/DOWN/LEFT/RIGHT/ ENTER Buttons 7) RETURN Button 8) A-B Button 9) FORWARD Button 10) REVERSE Button 11) SLOW Button 12) STOP Button 13) NUMERIC KEYPAD 14) SETUP Button 15) MENU Button 16) REPEAT Button 17) PREVIOUS Button 18) NEXT Button 19) PLAY Button Figure 5 20) PAUSE Button 9
ملخص المحتوى في الصفحة رقم 10
G. Loading and Playing a Disc a. After connecting power to the unit, slide the POWER ON/OFF on the right side to ON, the DVD player’s POWER indicator lights. b. Open the disc tray by pressing OPEN at the lower right of the disc tray,and place a disc into the tray with the disc’s label facing up. c. Press PRESS at the right side of the door until it clicks shut.The unit will load the disc and start playing. d. Rotate BRIGHT and VOLUME to adjust the LCD’s brightness and the DVD player’s volume
ملخص المحتوى في الصفحة رقم 11
H. SETUP Press ‘SETUP’ to display the Main screen of the SETUP Menu on the screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit will resume its last playback mode. 1) Press “Setup”, the ‘General SETUP’ page will display on screen. General SETUP Menu Screen a).Select ‘TV Type’ using UP/DOWN, and then press the RIGHT button to enter the submenu. Choose TV type using UP/DOWN and then press ENTER to confirm the setting. Press the LEFT button to return. TV Type Screen Display b).
ملخص المحتوى في الصفحة رقم 12
TV DISPLAY Screen Display * Normal/PS: When the player is connected to a normal TV, and a wide picture is shown on the full screen. * Normal/LB: When the player is connected to a normal TV, and a wide picture is shown on the screen with a black strip at both the top and bottom of the screen. * Wide: When the player is connected to a wide screen TV, a wide picture is shown on the full screen. c).Select ‘Angel Mark’ using UP/DOWN, and then press the RIGHT button to enter the submenu. Choose TV
ملخص المحتوى في الصفحة رقم 13
SCREEN SAVER Display *On: enables screen saver *Off: disables screen saver (off) *NOTE: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen. e). Select and use’ Last Memory’ in the same way before. LAST MEMORY Screen Display *On:: The unit will return to the last position on the disc. *Off:: The unit will not return to the last position on the disc. 2) With no disc inside the player select “Video quality Setup”by usin
ملخص المحتوى في الصفحة رقم 14
a).Select ‘Brightness’by using the UP or DOWN buttons ,then press ENTER you can change the Brightness by pressing the LEFT or RIGHT buttons. To exit brightness setting, press ENTER again to return the main Menu. BRIGHTNESS Screen Display b).Select ‘Contrast’by using the UP or DOWN buttons ,then press ENTER you can change the Brightness by pressing the LEFT or RIGHT buttons. To exit brightness setting, press ENTER again to return the main Menu. CONTRAST Screen Display c).Select and use ‘Hue
ملخص المحتوى في الصفحة رقم 15
d).Select and use ‘Saturation’ in the same way before. SATURATION (Color)Screen Display 3).With no disc inside the player, select ‘password’ using the LEFT or RIGHT buttons, press ENTER to enter the password setup page, then press the RIGHT button to enter the submenu . PASSWORD CHANGE Menu Press ENTER to enter the ‘Password Change’ page. Input the “Old password’ or the ‘Default Password’, the ‘New Password’, and the ‘Confirmed New Password’. Press ENTER to confirm the change. PASSWORD CHA
ملخص المحتوى في الصفحة رقم 16
NOTE: The Default Password is 3308. This password is always effective even after you have selected your own password and changed it. To avoid the possibility of others using the default password to set the parental level and change the password, you can record this default password in another area and delete it from this manual. Some discs can be limited depending on the age of users while some discs cannot. 4).Select ‘PREFERENCES’ using the LEFT or RIGHT buttons, then pre
ملخص المحتوى في الصفحة رقم 17
c. Select and use ‘Disc Menu’ in the same way before. Preference Disc Menu Language Note: Language and subtitle selection is only available for discs that are recorded in the above listed languages. If the selected, language is not available, the player will play and display on the screen the original recorded language contained in the disc. d. Select ‘Parental’ using the DOWN button, then press RIGHT to enter the submenu. Preference Parental Screen Display Select the parental level you de
ملخص المحتوى في الصفحة رقم 18
e. Select ‘Default’ using the DOWN button, then press RIGHT to enter the submenu. Press ENTER to make the setting return to the factory-set mode. Loading Factory Setting NOTE: The parental setting is not affected by the default reset function. 18
ملخص المحتوى في الصفحة رقم 19
I. Playing DVD 1. Basic Operation POWER Turn the unit on/off OPEN Remove/load the disc PLAY Start Play/Execute item or setting SLOW Play at 1/2, 1/4, 1/8 or 1/16 times speed PAUSE Still picture STOP (1 time) Stop at the present playing point / (2 times) Stop playing NEXT Go to the next chapter, track or scene during play back PREVIOUS Go back to the previous chapter, track or scene during play back FORWARD Scan forward at 2, 4, 8,16 or 32 times speed REVERSE Scan backward at 2, 4, 8, 16 or 32 t
ملخص المحتوى في الصفحة رقم 20
2. MENU A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playback to display the menu. Some DVDs only allow you to select disc playback options using the DVD root menu. 3. DISPLAY (Display contents vary from disc to disc.) 1. PLAYING TIME AND REMAINING TIME a. During playback press the ‘DISPLAY’ button to display the cur-
