ملخص المحتوى في الصفحة رقم 1
PLMRKT34
PLMR18
OWNER’S MANUAL
Mobile Audio System
• PLL Synthesizer Stereo Radio
• Automatic Memory Storing
• Preset Equalization
• USB Interface
• Auxiliary Input Function
• Remote Control
www.pyleaudio.com
ملخص المحتوى في الصفحة رقم 2
CONTENTS Installation ........................................3 Take out screw before installation......3 DIN Front-Mount (Method A) .............3 Installing the unit ............................3 Removing the unit...........................4 DIN Rear-Mount (Method B) ..............5 Wiring Connection ...........................6 Operation ..........................................7 Location of keys.................................7 Switching on/off the unit....................8 Sound adjustm
ملخص المحتوى في الصفحة رقم 3
INSTALLATION Notes: TAKE OUT SCREW BEFORE INSTALLATION • Choose the mounting location where Before install the unit, please remove the the unit will not interfere with the two screws. normal driving function of the driver. Take out screw before installation • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. • Use only the parts included with the unit to ensure proper installation. Th
ملخص المحتوى في الصفحة رقم 4
INSTALLATION Sleeve Note: to install the short threading terminal L Key of the mounting bolt to the back of the Outer Trim Ring unit and the other long threading terminal Front Panel to the dashboard. Spring Washer Hex Nut Metal Strap Mounting Bolt R Key Plain Washer Tapping Screw 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so examine which ones will
ملخص المحتوى في الصفحة رقم 5
INSTALLATION DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle. Side view showing Screw Holes marked T, N Factory Radio Screw Mounting Bracket Screw Dashboard or Console To fasten the unit to the factory radio mounting brackets. Align the screw holes on the bracket with the screw h
ملخص المحتوى في الصفحة رقم 6
WIRING CONNECTION MAIN UNIT ANTENNA CONNECTOR FUSE RED IGNITION SWITCH (ACC+) FUSE MEMORY YELLOW BACK-UP (B+) (GREY) BLACK Rch RED RCA CABLE GROUND (B–) Lch WHITE POWER BLUE ANTENNA WHITE GREY FRONT Lch FRONT Rch SPEAKER SPEAKER WHITE/BLACK GREY/BLACK GREEN VIOLET REAR Lch REAR Rch SPEAKER SPEAKER GREEN/BLACK VIOLET/BLACK 6
ملخص المحتوى في الصفحة رقم 7
OPERATION LOCATION OF KEYS 1 2 3 4 5 6 7 8 9 10 11 12 25 24 23 22 21 20 19 18 17 16 15 14 13 7
ملخص المحتوى في الصفحة رقم 8
OPERATION • SWITHCHING ON/OFF THE UNIT - Initial installation of the unit when all Switch on the unit by pressing any wiring is completed. button. When system is on, press - All the function buttons do not button (1) to turn off the unit. operate. - Error symbol on the display. • SOUND ADJUSTMENT Note: If press RESET button (25), the Press SEL button (3) shortly to select unit can’t work yet, please use a cotton the desired adjustment mode. swab soaked in isopropyl alcohol to The adjustmen
ملخص المحتوى في الصفحة رقم 9
OPERATION • STATION STORING It supports the MP3/WMA file in the Press any one of the preset button(18) device, the operation please refer to the (1 to 6) to select a station, which had following instruction. been stored in the memory. Press this • SELECTING TRACKS IN SINGLE button for several seconds (until 2ND STEP beeps come out), current station is Press button (24) or button(2) stored into the number button. to move to the previous track or the • SCAN following track. Track number shows P
ملخص المحتوى في الصفحة رقم 10
OPERATION • SELECTING TRACKS BY name are displayed (selected). The user can select the directory or file in the AS/PS/Navi-SCH BUTTON directory by volume knob.The selected AS/PS (Navi-SCH) button is assigned file can be played by pressing as file searching button in MP3 file BND/LOU/ENT button. operation. • DISPLAY INFORMATION When pressed, it is activated as Press DISP button (9) to show selecting each mode of Digital Audio. following information, such as the “Searching track number” => clock,
ملخص المحتوى في الصفحة رقم 11
OPERATION SUPPORTED MP3/WMA DECODING MODES The main unit supports MP3/WMA (Windows Media Audio) decoding modes as below. Standard Bit Rate (kbps) Supports Mode MPEG1 Audio 32, 48, 64, 96, Stereo Layer 3 128, 192, 256, (44.1kHz) 320 Windows 64, 96, 128, Stereo Media Audio 192 (44.1kHz) The USB solution can support: 1. Folder: 500 max. 2. File: 999 max. 3. Depth of folder: 8 layers 4. Size: 1 GB CAUTION: When there are important files in the USB device, do not connect it to the main unit to play.
ملخص المحتوى في الصفحة رقم 12
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - Treble (at 10 KHz) : ± 10 dB Maximum Output Power : 4 x 40 Watts Current Drain : 15 Ampere (max.) CD PLAYER Signal to Noise Ratio : More than 55 dB Channel Separation : More than 45 dB Frequency Response : 40 Hz - 18 KHz RADIO FM Frequency Coverage : 87.5 to 107.9 MHz IF : 10.7 MHz Sensitivity (S/N = 30 dB) : 4 μV Stereo Separ
ملخص المحتوى في الصفحة رقم 13
TROUBLE SHOOTING Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer. Symptom Cause Solution No power. The car ignition switch is If the power supply is not on. connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. No sound. Volume is in minimum. Adjust volume to a desired level. Wiring is not properly
ملخص المحتوى في الصفحة رقم 14
8800-0C3023-02
