Lenmar Enterprises Lenmar N-Verter NVC450D دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Operating your N-Verter
1. The NVC250 comes with a cigarette lighter adapter cable only, and the NVC450D comes with both a cigarette lighter
adapter cable for powering devices under 300W, and a clip lead set for all loads up to 450W. According to your unit and
the power you will require, connect the appropriate cable to the power cable posts on the N-Verter as shown in figure-2.
Be sure to match the color of the cable ends to the color of the post (red to red and black to black) and make su

ملخص المحتوى في الصفحة رقم 2

Warning - When using you N-Verter with the vehicle’s engine turned off, the battery is being drained. Be careful to Specifications re-start the engine or otherwise recharge the battery periodically to avoid draining the battery too deeply. The internal NVC250 - 250W “low voltage shut-off” of the N-Verter does not guarantee that the remaining power left in the battery is enough to start Maximum output power 250W (15 min.) the vehicle. Surge output power 500W (10