ملخص المحتوى في الصفحة رقم 1
KDC-U7046BT
KDC-U7046BTL
KDC-U6046
KDC-U6046L
CD-RECEIVER
Quick Start Guide
© B59-2008-00/00 (MW)
ملخص المحتوى في الصفحة رقم 2
Contents Before use .................................................. 3 First step ..................................................... 4 Basic Operations ...................................... 5 Playing Music (CD/USB/iPod) .............. 6 Listening to the Radio ........................... 7 Hands-free phoning ............................... 8 Accessories ..............................................10 Installation Procedure .........................10 Before Installation ...................
ملخص المحتوى في الصفحة رقم 3
Before use 2WARNING Lens Fogging When you turn on the car heater in cold To prevent injury or fire, take the weather, dew or condensation may form following precautions: on the lens in the CD player of the unit. To prevent a short circuit, never put or leave Called lens fogging, this condensation on any metallic objects (such as coins or metal the lens may not allow CDs to play. In such tools) inside the unit. a situation, remove the disc and wait for the condensation to evaporate. If
ملخص المحتوى في الصفحة رقم 4
First step Control Knob [ ] [FNC] [ENTER] button. Exit Demonstration Mode Turn off the demonstration mode 5 Turn the Control knob to select “Date when you use it for the first time after Adjust”, and then press the [ENTER] installation. button. 1 Press the [ENTER] button to quit 6 Turn the Control knob to adjust the the demonstration mode when the year, and then press the [ENTER] button. messages “To Cancel DEMO Press the 7 Turn the Control knob to adjust the ENTER Key” are displaye
ملخص المحتوى في الصفحة رقم 5
Basic Operations [SRC] Control Knob USB Terminal Auxiliary input [ENTER] Power Turns the power ON by pressing the [SRC] button. Press the [SRC] button for at least 1 second to turn the power OFF. Source selection Press the [SRC] button and then turn the Control knob. To determine the selected source, press the [ENTER] button. Tuner (“TUNER”) ➜ Bluetooth Audio (“BT AUDIO”) (KDC-U7046BT/ KDC-U7046BTL only) ➜ USB (“USB”) or iPod (“iPod”) ➜ CD (“CD”) ➜ Auxiliary Input (“AUX”) ➜ Standby (“S
ملخص المحتوى في الصفحة رقم 6
Playing Music (CD/USB/iPod) [ ] Control Knob Disc slot [0] USB Terminal [ ] [ENTER] Playing Disc Music Search Insert the disc in the Disc slot. Searching for the song you want to play. When inserted, the source is switched 1 Press the [ ] button. automatically and a song starts playing. 2 Search for music. Playing USB device Operation type Operation Connect a USB device or iPod to the USB Movement between items Turn the Control knob. terminal. Selection of item Press the [ENTER]. When
ملخص المحتوى في الصفحة رقم 7
Listening to the Radio [SRC] Control Knob [ENTER] Selecting a Tuner source 1 Press the [SRC] button. 2 Turn the Control knob to select “TUNER”, and then press the [ENTER] button. Selecting the Band Push the Control knob towards up to change the band in the order of FM1 ➜ FM2 ➜ FM3. Push the Control knob towards down to change the band to AM. Selecting a Station Push the Control knob leftward and rightward to select the station you want to listen to. | English 7
ملخص المحتوى في الصفحة رقم 8
Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-BT200 (Optional Accessory) Hands-free phoning KDC-U7046BT KDC-U7046BT [SRC] Control Knob Microphone KDC-U7046BT KDC-U7046BT [ENTER] [FNC] KDC-U7046BTL KDC-U7046BTL [ ] [ ] Registering c ell-phone 2 Turn the Control knob to select “Initial Register your Bluetooth cellphone in this Search”, and then press the [ENTER] unit. button. 1 By operating the cell-phone, register 3 Input initial. the hands-free unit (pairing). Select Operation typ
ملخص المحتوى في الصفحة رقم 9
Answering a Phone Call Microphone Gain and Noise KDC-U7046BT KDC-U7046BTL redaction setting (KDC-U7046BT/ Press the [ ] button. KDC-U7046BTL only) KDC-U6046 KDC-U6046L If the microphone level is low or the Press the [ENTER] button. ambient noise is large during hands free phoning, make adjustments. Disconnecting a Call 1 Press the [ ] button to enter the KDC-U7046BT KDC-U7046BTL Bluetooth mode. Press the [ ] button. 2 Press the [FNC] button to enter the KDC-U6046 KDC-U604
ملخص المحتوى في الصفحة رقم 10
Accessories Before Installation 2WARNING 1 If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis .....1 (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running 2 through the fuse box. ¤ .....2 • Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work 3 to professionals. • Make sure to ground the unit to a negative 12V
ملخص المحتوى في الصفحة رقم 11
tape or other similar material. To prevent For Good Reception a short circuit, do not remove the caps on To assure good reception, note the the ends of the unconnected wires or the following: terminals. • Communicate with the cell-phone within • Connect the speaker wires correctly to the the line-of-sight distance of 10 m (30 terminals to which they correspond. The ft). The communication range becomes unit may be damaged or fail to work if shorter depending on the surrounding you shar
ملخص المحتوى في الصفحة رقم 12
Connecting Wires to Terminals ⁄ • Speaker Impedance: 4 – 8 Ω • USB terminal Maximum Supply current : 500 mA White To front left speaker White/Black Gray To front right speaker Gray/Black Green To rear left speaker Green/Black Purple To rear right speaker Purple/Black Ignition key switch Car fuse box ACC Ignition wire (Red) Battery wire (Yellow) Car fuse box (Main fuse) Ground wire (Black) · (To car chassis) + Battery | 12 Quick Start Guide
ملخص المحتوى في الصفحة رقم 13
Rear output R L Front output Sub Woofer output Fuse (10A) FM/AM antenna input R L To optional accessory microphone KCA-MC10 (KDC-U7046BT/ KDC-U7046BTL only) To Kenwood disc changer/ External optional Wiring harness accessory (Accessory1) To connect these leads, refer to the ⁄ relevant instruction manuals. If no connections are made, do not let the wire come out from the tab. Power control wire (Blue/White) When using the optional power amplifier, connect to its power control terminal. P.C
ملخص المحتوى في الصفحة رقم 14
Installation/Removing the Unit non-Japanese cars Removing the hard rubber frame 1. Engage the catch pins on the removal tool and remove the two locks on the upper level. Lift up and pull the frame forward as shown in the figure. Catch Bend the tabs of the mounting sleeve Lock with a screwdriver or similar utensil and attach it in place. Removal tool (Accessory2) ⁄ 2. When the upper level is removed, • Make sure that the unit is installed remove the lower two locations. securely in place. I
ملخص المحتوى في الصفحة رقم 15
The marking of products using lasers • The Bluetooth word mark and logos are (Except for some areas) owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade CLASS 1 names are those of their respective owners. • The “AAC” logo is a trademark of Dolby LASER PRODUCT Laboratories. • iPod is a trademark of Apple Inc., registered in The label is attached to the chassis/case and says the U.S. and other countries. that the
ملخص المحتوى في الصفحة رقم 16
| 16
ملخص المحتوى في الصفحة رقم 17
2 KDC-U7046BT KDC-U6046 32 KDC-U7046BTL KDC-U6046L 33 | 17
ملخص المحتوى في الصفحة رقم 18
[ ] [FNC] [ENTER] 7 [ENTER] 8 1 [ENTER] 9 [ENTER] [ENTER] 10 2 [ENTER] [ENTER] 11 [ ] 1 [FNC] 2 ➜ ➜ [ENTER] 3 [ENTER] 4 [ENTER] 5 [ENTER] 6 [ENTER] | 18
ملخص المحتوى في الصفحة رقم 19
[SRC] [ENTER] [SRC] [SRC] [SRC] [ENTER] ➜ ➜ ➜ ➜ ➜ ➜ | 19
ملخص المحتوى في الصفحة رقم 20
[ ] [0] [ ] [ENTER] 1 [ ] 2 [ENTER] [ ] [ ] [0] [0] [ ] | 20
