Kenwood KDC-MP533V دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

CD-RECEIVER
KDC-MP533V
INSTRUCTION MANUAL
© B64-3476-00/00 (MW)

ملخص المحتوى في الصفحة رقم 2

Contents Safety precautions 3 Menu system 16 Menu System Notes 4 Touch Sensor Tone Manual Clock Adjustment About CDs 5 DSI (Disabled System Indicator) Dimmer About MP3 and WMA 6 CRSC (Clean Reception System Circuit) Auxiliary Input Display Setting General features 7 Text Scroll Power Built-in Auxiliary Input Setting Selecting the Source CD Read Setting Volume Switches the NTSC/PAL setting Attenuator Basic Operations of remote control 19 System Q Audio Control Accessories/ Installation Procedure

ملخص المحتوى في الصفحة رقم 3

Safety precautions Do Not Load 8 cm (3 in.) CDs in the CD 2WARNING slot To prevent injury or fire, take the If you try to load a 8 cm (3 in.) CD with its adapter following precautions: into the unit, the adapter might separate from the • To prevent a short circuit, never put or leave any CD and damage the unit. metallic objects (such as coins or metal tools) inside the unit. Lens Fogging • Mounting and wiring this product requires When you turn on the car heater in cold weather, skills a

ملخص المحتوى في الصفحة رقم 4

Notes • If you experience problems during installation, Cleaning the Unit consult your Kenwood dealer. If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. • When you purchase optional accessories, check If the faceplate is stained badly, wipe the stain off with your Kenwood dealer to make sure that they with a cloth moistened with neutral cleaner, then work with your model and in your area. wipe it again with a clean soft dry cloth. • If the uni

ملخص المحتوى في الصفحة رقم 5

About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit, pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be

ملخص المحتوى في الصفحة رقم 6

About MP3 and WMA The playable MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not conforming File/Folder name: 64 (Joliet: 32) characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property file and folder names may not display correctly. : 30 characters Playable Audio file • MP3, WMA • File/Folder name is the number of the characters inclu

ملخص المحتوى في الصفحة رقم 7

General features ATT VOL Control knob Release button Q SRC Clock display LOUD indicator ATT indicator Volume Power Increasing Volume Turning ON the Power Turn the [VOL] knob clockwise. Press the [SRC] button. Decreasing Volume Turning OFF the Power Turn the [VOL] knob counterclockwise. Press the [SRC] button for at least 1 second. Attenuator Selecting the Source Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required Display Each time you press the button

ملخص المحتوى في الصفحة رقم 8

General features System Q Fader "FAD" Rear 15 — Front 15 Exit Audio Control mode (Volume control mode) Selecting the best sound setting preset for different types of music. 5 Exit Audio Control mode Press any button. 1 Select the source to set Press a button other than the [VOL] knob and Press the [SRC] button. [ATT] button. 2 Select the Sound type Press the [Q] button. When you press the button once, the current sound setting is displayed. Audio Setup Each time you press the button, the so

ملخص المحتوى في الصفحة رقم 9

In Audio file source Speaker Setting Information Display Fine-tuning so that the System Q value is optimal Song title & Artist name "TITLE"* when setting the speaker type. Album name & Artist name "ALBUM"* 1 Enter Standby Folder name "FOLDER" Press the [SRC] button. File name "FILE" Select the "STANDBY" display. Track number & Play time "P-TIME" Clock "CLOCK" 2 Enter Speaker Setting mode Press the [VOL] knob. In VCD source 3 Select the Speaker type Information Display Turn the [VOL] knob. Track

ملخص المحتوى في الصفحة رقم 10

General features Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and The audio system automatically mutes when a taken with you, helping to deter theft. call comes in. Removing the Faceplate When a call comes in "CALL" is displayed. 1 Press the Release button. The audio system pauses. Drop open the faceplate. Listening to the audio during a call 2 Drawing the faceplate to left side, pull it and Press the [SRC] button. detach from the unit. The "CALL" display disapp

ملخص المحتوى في الصفحة رقم 11

Tuner features AUTO/AME Control knob 1-6 SRC Band display Frequency display ST indicator Preset station number Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning Press the [SRC] button. mode alternates between the modes shown in Select the "TUNER" display. the table below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "AUTO 1" Automati

ملخص المحتوى في الصفحة رقم 12

Tuner features Station Preset Memory Preset Tuning Putting a station in the memory. Recalling the stations in the memory. 1 Select the band 1 Select the band Push the Control knob towards [FM] or [AM]. Push the Control knob towards [FM] or [AM]. 2 Select the frequency to put in the memory 2 Recall the station Push the Control knob towards [4] or Press the desired [1] — [6] button. [¢]. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least Frequency Step Setting 2 sec

ملخص المحتوى في الصفحة رقم 13

CD/Audio file/VCD control features Control knob Release button SCAN/ RDM/ REP F.SEL SRC M/S 3 Track number Play time IN indicator When a disc is inserted Playing CD, Audio file & VCD Press the [SRC] button. Select the "CD" display. When there is no disc inserted 1 Drop open the faceplate Pause and play Press the Release button. Press the Control knob. Each time you press the knob, the audio pauses 2 Insert a disc. or plays. 3 Push the faceplate on the left side, and return Eject the disc it t

ملخص المحتوى في الصفحة رقم 14

CD/Audio file/VCD control features Fast Forwarding and Reversing Track/File/Folder Repeat Replaying the song or Audio file folder you are Fast Forwarding listening to. Hold down the Control knob toward [¢]. Press the [REP] button. Release to resume the playback. Each time you press the button, the Repeat Play Reversing alternates between the modes shown in the Hold down the Control knob toward [4]. tables below. Release to resume the playback. In CD,VCD source Repeat play Display • The sound

ملخص المحتوى في الصفحة رقم 15

Function of VCD Audio output select • When you push the Control knob toward [¢], the You can change the audio output to Left or Right next random song starts. STEREO. Press the [M/S] button. Function of Audio file Display Operation "ST" The stereo sound is output. Folder Select "LL" Outputs the Left channel sound to the right Quickly selecting the folder you want to hear. and left speakers. "RR" Outputs the Right channel sound to the right 1 Enter Folder Select mode and left speakers. Press

ملخص المحتوى في الصفحة رقم 16

Menu system Control knob MENU SRC Menu display You can continue by returning to step 2 and Menu System setting other items. Setting beep sound during operation, etc. 4 Exit Menu mode functions. Press the [MENU] button. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation • When other items those applicable to the basic explanation. operation method above are displayed, their setting content chart is en

ملخص المحتوى في الصفحة رقم 17

In Standby mode In Standby mode Touch Sensor Tone Dimmer Setting the operation check sound (beep sound) Dimming this unit’s display automatically when ON/OFF. the vehicle light switch is turned ON. Display Setting Display Setting "BEEP ON" Beep is heard. "DIM ON" The display dims. "BEEP OFF" Beep canceled. "DIM OFF" The display doesn’t dim. In Standby mode In FM reception Manual Clock Adjustment CRSC (Clean Reception System Circuit) 1 Select Clock Adjustment mode Push the Control knob towards

ملخص المحتوى في الصفحة رقم 18

Menu system Auxiliary Input Display Setting Selecting the display when changing to Auxiliary • The text scrolled is listed below. input source. - CD text - Folder name/ File name/ Song title/ Artist name/ 1 Select Auxiliary input source Album name Press the [SRC] button. Select the "AUX" display. 2 Enter Menu mode In Standby mode Press the [MENU] button for at least 1 second. Built-in Auxiliary Input Setting "MENU" is displayed. Set the Built-in Auxiliary Input function. 3 Select Auxiliar

ملخص المحتوى في الصفحة رقم 19

+ Basic Operations of remote control SRC VOL SRC ATT ATT VOL AUD 38 38 AUD FM 4 ¢ 4/¢ AM– FM/AM/+/– DIRECT /OK Not Used Not Used ABC DEF GHI JKL MNO [0]—[9] PRS TUV WXY QZ Loading and Replacing the battery Basic operations Use two "AA"/ "R6"-size batteries. [VOL] buttons Slide the cover while pressing downwards to Adjusts the volume. remove it as illustrated. [SRC] button Insert the batteries with the + and – poles aligned Each time you press the button, the source properly, following the ill

ملخص المحتوى في الصفحة رقم 20

Basic Operations of remote control Audio Control [AUD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. • Refer to