ملخص المحتوى في الصفحة رقم 1
CD RECEIVER KD-S675
CD KD-S675
¶Ò´ãÊè«Õ´Õ KD-S675
RM-RK31
COMPACT
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
&' *
¡ÃسҴ٤ÙèÁ×Í·ÕèᡵèÒ§ËÒ¡ 㹡ÒõԴµÑé§áÅСÒÃàª×èÍÁµèÍ
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
INSTRUCTIONS
Model No.
Serial No.
¤Óá¹Ð¹Ó
GET0012-001A
[U]
COVER.KD-S675[U]/1 1 14/12/00, 11:07 AM
ä·Â
E
ملخص المحتوى في الصفحة رقم 2
How to reset your unit (Standby/On/ATT) Press and hold both the SEL (Select) and (Standby/On/ATT) buttons at the same time for several seconds. This will reset the built-in microcomputer. NOTES: Your preset adjustments — such as preset channels or sound adjustments — will also be erased. If a CD is in the unit, it will eject when you reset the unit. Pay attention not to drop the CD. SEL (Select) BEFORE USE For safety.... Temperature inside the car.... * * • Do not raise the volume level too mu
ملخص المحتوى في الصفحة رقم 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .......................................................................... 2 BASIC OPERATIONS ....................................................4 RADIO OPERATIONS ...................................................5 Listening to the radio .................................
ملخص المحتوى في الصفحة رقم 4
BASIC OPERATIONS 1 Note: When you use this unit for the first time, set the built-in clock correctly, see page 19. 3 2 1 Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. To operate the tuner, see pages 5 – 9. To operate the CD player, see pages 10 – 12. 3 Adjust the volume. Volume level indicator Volume level appears 4 Adjust the sound as you
ملخص المحتوى في الصفحة رقم 5
RADIO OPERATIONS Listening to the radio 1 2 1 Select the band (FM1, FM2, FM3 or AM). You can select any one of FM1, FM2, and FM3 to listen to an FM station. selected band appears AM Audio or volume level indicator FM1 FM2 FM3 2 Start searching a station. To search stations When a station is received, searching stops. of higher frequencies. To search stations of lower frequencies. To stop searching before a station is received, press the same button you have pressed for searching. To tune in a pa
ملخص المحتوى في الصفحة رقم 6
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3). 1 2 1 FM1 FM2 FM3 Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into. 2 Press and hold the both buttons for more than 2 seconds. “SSM” a
ملخص المحتوى في الصفحة رقم 7
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1 3 2 1 Select the FM1 band. 2 Tune into a station of 88.3 MHz. See page 5 to tune into a station. 3 Press and hold the button for more than 2 seconds. “P1” flashes for a few seconds. 4 Repeat the above procedure to store other stations into other preset numbers. Notes: • A previously preset station is erased when a new s
ملخص المحتوى في الصفحة رقم 8
Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 6 and 7. 1 2 1 Select the band (FM1, FM2, FM3 or AM) you want. FM1 FM2 FM3 AM 2 Select the number (1 – 6) for the preset station you want. 8 EN05-09.KD-S675[U] 8 24/3/05, 8:46 PM ENGLISH
ملخص المحتوى في الصفحة رقم 9
Other convenient tuner functions RPT/SCAN MO/RND Scanning broadcast stations When you press RPT/SCAN while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcasted. If you want to listen to that program, press the same button again to stop scanning. Selecting FM reception sound When an FM stereo broadcast is hard to receive: Press
ملخص المحتوى في الصفحة رقم 10
CD OPERATIONS Playing a CD 1 0 1 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically. • When a CD is inserted upside down, “EJECT” appears on the display and the CD automatically ejects. A A Total playing time of Total track number Elapsed playing Current track the inserted disc of the inserted disc time Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD turns on the unit and starts playback automatically. CAUTION o
ملخص المحتوى في الصفحة رقم 11
Locating a track or a particular portion on a CD Number buttons ¢ 4 To fast forward or reverse the track Press and hold ¢ , while playing a CD, to fast forward the track. Press and hold 4 , while playing a CD, to reverse the track. To go to the next track or the previous track Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next tracks is located and played back. Press 4 briefly, while
ملخص المحتوى في الصفحة رقم 12
Selecting CD playback modes RPT/SCAN MO/RND To play back tracks at random (Random Play) You can play back all tracks on the CD at random. Each time you press MO/RND (Mono/Random) while playing a CD, CD random play mode turns on and off alternatively. When the random mode is turned on, the RND indicator lights up on the display and a track randomly selected starts playing. To play back tracks repeatedly (Repeat Play) You can play back the current track repeatedly. Each time you press RPT/SCAN (Re
ملخص المحتوى في الصفحة رقم 13
SOUND ADJUSTMENTS Adjusting the sound You can adjust the treble/bass sound and the speaker balance. 2 1 Equalization pattern indicator 1 Select the item you want to adjust. Indication To do: Range BAS Adjust the bass –06 (min.) — +06 (max.) (Bass) TRE Adjust the treble –06 (min.) — +06 (max.) (Treble) FAD Adjust the front and rear speaker R06 (rear only) — F06 (front only) (Fader)* balance BAL Adjust the left and right speaker L06 (left only) — R06 (right only) (Balance) balance VOL Adjust the
ملخص المحتوى في الصفحة رقم 14
Turning on/off the loudness function The human ear is less sensitive to low and high frequencies at low volumes. The loudness function can boost these frequencies to produce well-balanced sound at low volume level. Each time you press LOUD, the loudness function turns on and off alternatively. @ A 14 EN13-18.KD-S675[U] 14 14/12/00, 6:43 PM ENGLISH
ملخص المحتوى في الصفحة رقم 15
Using the Sound Control Memory (SCM) You can select and store a preset sound adjustment suitable to each playback source. (Advanced SCM) Selecting and storing the sound modes Once you select a sound mode, it is stored in memory, and will be recalled every time you select the same source. A sound mode can be stored each of the following sources — FM1, FM2, FM3, AM or CD. • If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all t
ملخص المحتوى في الصفحة رقم 16
Recalling the sound modes 1 1 When “SCM LINK” is set to “LINK ON,” select the source. The sound mode stored in memory for the selected source is recalled. Sound mode indicator Notes: • You can adjust each sound mode to your preference, and store it in memory. If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on page 18. • To adjust the bass and treble reinforcement levels or to turn on/off the loudness function temporarily, see pages 13 and 14. (Y
ملخص المحتوى في الصفحة رقم 17
Canceling Advanced SCM You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources. When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources. LINK ON: Advanced SCM (different SCMs for different sources) LINK OFF: Conventional SCM (one SCM for all sources) 3 1, 4 2 1 Press and hold SEL for more than 2 seconds. “CLOCK H,” “CLOCK M,” “SCM LINK,”
ملخص المحتوى في الصفحة رقم 18
Storing your own sound adjustments You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and store your own adjustments in memory. 2 3 2 1, 4 1 Call up the sound mode you want to adjust. See page 15 for details. Within 5 seconds 2 To adjust the bass or treble sound level Select “BAS” or “TRE.” To turn on or off the loudness function Each time you press LOUD, the loudness function turns on and off alternatively. (= go to step 4) Within 5 seconds 3 Adjust the bass or tre
ملخص المحتوى في الصفحة رقم 19
OTHER MAIN FUNCTIONS Setting the clock 2, 3 1, 4 DISP 2, 3 1 Press and hold SEL for more than 2 seconds. “CLOCK H,” “CLOCK M,” “SCM LINK,” “LEVEL” or “TEL” appears on the display. 1. 2 Set the hour. 1. Select “CLOCK H” if not shown on the 2. display. 2. Adjust the hour. 1. 3 Set the minute. 1. Select “CLOCK M.” 2. 2. Adjust the minute. 4 Start the clock. 19 EN19-23.KD-S675[U] 19 14/12/00, 6:40 PM ENGLISH
ملخص المحتوى في الصفحة رقم 20
To check the current clock time (changing the display mode) Press DISP repeatedly. Each time you press the button, the display mode changes as follows. During tuner operation: During CD operation: Elapsed Clock Clock Frequency playing time • If the unit is not in use when you press DISP, the power turns on, the clock time is shown for 5 seconds, then the power turns off. 20 EN19-23.KD-S675[U] 20 14/12/00, 6:40 PM ENGLISH
