ملخص المحتوى في الصفحة رقم 1
CD RECEIVER
CD-RECEIVER
РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ
KD-G821
For canceling the display demonstration, see page 6.
Zum Abbrechen der Displaydemonstration siehe Seite 6.
Информацию об отмене демонстрации функций дисплея см. на стр. 6.
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Указания по установке и выполнению соединений приводятся в отдельной инструкции.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
ИНСТРУК
ملخص المحتوى في الصفحة رقم 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid dire
ملخص المحتوى في الصفحة رقم 3
How to read this manual CONTENTS • Button operations are mainly explained with the illustrations in the table below. Control panel ................................... 4 • Some related tips and notes are explained in “More about this unit” (see pages 35 – 39). Remote controller — RM-RK50 ................. 5 Getting started ................................. 6 Basic operations ................................................... 6 Press briefly. Radio operations .............................. 7
ملخص المحتوى في الصفحة رقم 4
Control panel Parts identification 1 BAND button 7 T/P (traffic programme/programme type) 2 • Control dial button • (standby/on attenuator) button 8 0 (eject) button 3 DISP (display) button 9 USB (Universal Serial Bus) input terminal 4 Remote sensor p SRC (source) button • DO NOT expose the remote sensor to q (control panel release) button strong light (direct sunlight or artificial w SEL (select) button lighting). e MODE button 5 Display window r Number buttons 6 5 (up) / ∞ (down) buttons t
ملخص المحتوى في الصفحة رقم 5
Remote controller — RM-RK50 Installing the lithium coin battery Main elements and features (CR2025) Aim the remote controller directly at the 1 (standby/on/attenuator) button remote sensor on the unit. Make sure there is • Turns the power on if pressed briefly or no obstacle in between. attenuates the sound when the power is on. • Turns the power off if pressed and held. Warning: 2 5 U (up) / D (down) ∞ buttons • Changes the FM/AM/DAB bands with 5 U. • Do not install any battery other tha
ملخص المحتوى في الصفحة رقم 6
5 SOURCE button ! • Selects the source. 6 2 R (reverse) / F (forward) 3 buttons • Searches for stations (or services) if • For FM/AM tuner pressed briefly. • Searches for ensembles if pressed and held. • Fast-forwards or reverses the track if • For DAB tuner pressed and held. • Changes the tracks if pressed briefly. • While listening to an iPod or a D. player (in menu selecting mode): ⁄ Adjust the volume. – Selects an item if pressed briefly. (Then, press D ∞ to confirm the selection.) – Ski
ملخص المحتوى في الصفحة رقم 7
2-2 Setting the clock 1 Press number button 4 ( ). 2 * “Clock Hr” (hour) appears. Then, turn the control dial to adjust the hour. 1 “LARGE” (full display size) graphic* is displayed. 2 Press ¢ to select “Clock Min” (minute). Then, turn the control dial to adjust the minute. 3 Press ¢ to select “24H/12H.” Then, turn the control dial to select Audio level meter is displayed (see “LevelMeter” on page 20). “24Hours” or “12Hours,” time display mode. Goes back to the initial display pattern.
ملخص المحتوى في الصفحة رقم 8
To tune in to a station manually 2 In step ! on page 7... 1 3 Select “SSM.” 2 Select a desired station frequency. 4 When an FM stereo broadcast is hard to receive 1 Local FM stations with the strongest signals are searched and stored automatically in the FM 2 band. Manual presetting Ex.: Storing FM station of 92.5 MHz into preset 3 Exit from the setting. number 4 of the FM1 band. Using the number buttons lights up on the display. 1 Reception improves, but stereo effect will be lost. To re
ملخص المحتوى في الصفحة رقم 9
1 Follow steps 1 and 2 of “Using the Listening to a preset station number buttons” on page 8. • By holding 5 / ∞, the Preset Station List Using the number buttons will appear (go to step 4). 1 2 2 Select the preset station (1 – 6) you 3 Display the Preset Station List. want to listen to. Using the Preset Station List 1 Display the Preset Station List, then select the preset station you want to listen to. 4 Select the preset number you want to store into. 2 Change to the selected station. •
ملخص المحتوى في الصفحة رقم 10
Searching for your favorite ⁄ Start searching for your favorite programme. FM RDS programme You can tune in to a station broadcasting your favorite programme by searching for a PTY code. • When appears on the display, you can move back to the previous display by pressing If there is a station broadcasting a number button 3. programme of the same PTY code as you have selected, that station is tuned in. ~ Storing your favorite Ÿ Select “Search.” programme types You can store six favorit
ملخص المحتوى في الصفحة رقم 11
To deactivate the TA Standby Reception 5 Store the selected PTY code. goes off. PTY Standby Reception PTY Standby Reception allows the unit to switch temporarily to your favorite programme type from any source other than AM. EX.: When “Classics” is selected in step 4 on page 10 • This function also takes effect for the DAB tuner. 6 Repeat steps 3 to 5 to store other PTY To activate the PTY Standby Reception and codes into other preset numbers. select the PTY codes 1 7 Exit from the settin
ملخص المحتوى في الصفحة رقم 12
Tracing the same programme— Disc/USB memory Network-Tracking Reception operations When driving in an area where FM reception is not sufficient enough, this unit automatically Playing a disc in the unit tunes in to another FM RDS station of the All tracks will be played repeatedly until you same network, possibly broadcasting the same change the source or eject the disc. programme with stronger signals (see the illustration below). When shipped from the factory, Network- Tracking Receptio
ملخص المحتوى في الصفحة رقم 13
Playing a USB memory Track and folder information (CD/CD Text/ This unit can play MP3/WMA tracks stored in a MP3/WMA/USB) USB memory. Once you insert a disc or attach a USB All tracks in the USB memory will be played memory, the total track number/total repeatedly until you change the source. playing time (for CD/CD Text) and total • Removing the USB memory will also stop folder number/total track number (for MP3/ playback. WMA/USB) appears, then the following information appears... ~ Ex
ملخص المحتوى في الصفحة رقم 14
About MP3 and WMA tracks To go to the next or previous folders (only for MP3/WMA/USB) MP3 and WMA “tracks” (words “file” and “track” are used interchangeably) are recorded For MP3 tracks: in “folders.” For WMA tracks: When an MP3/WMA folder in an MP3/ WMA disc includes an image file edited by Image Converter (Ver 3.0)— supplied in the CD-ROM, you can show the For the main unit: image on the display while the tracks in the • Holding either of the buttons can display the folder a
ملخص المحتوى في الصفحة رقم 15
5 Change to the selected item. Other main functions Selecting a disc/folder/track on the list • When appears on the display, you can • The list disappears and playback starts. move back to the previous display by pressing number button 3. Skipping tracks quickly during play 1 Only possible on JVC MP3-compatible CD changer 2 Select “LIST.” • For MP3/WMA/USB, you can skip tracks within the same folder. Ex.: To select track 32 while playing a track whose number is a single digit (1 to 9).
ملخص المحتوى في الصفحة رقم 16
Prohibiting disc ejection 7 Repeat play You can lock a disc in the loading slot. Mode Plays repeatedly • “No Eject” appears on the display. Track: The current track [ ]. 1 To cancel the prohibition, repeat the same Folder* : All tracks of the current folder procedure. [ ]. 2 • “Eject OK” appears on the display. Disc* : All tracks of the current disc [ ]. Off: Cancels. Selecting the playback modes 7 Random play You can use only one of the following playback modes at a time. 1 2 Select your d
ملخص المحتوى في الصفحة رقم 17
• 80Hz: Frequencies higher than 80 Hz are cut off. Sound adjustments • 120Hz: Frequencies higher than 120 Hz are cut off. Adjusting the sound • 160Hz: Frequencies higher than 160 Hz are cut off. You can adjust the sound characteristics to your 3 Turn the control dial to adjust the preference. subwoofer output level. [0 to 8] • When appears on the display, you can move back to the previous display by pressing C VolAdjust number button 3. Turn the control dial to adjust the input level of
ملخص المحتوى في الصفحة رقم 18
3 Press number button 2 ( ), then 1 turn the control dial to select the band width. 2 Select a sound mode. Range/selectable items Sound elements Low Mid High Level –06 to –06 to –06 to +06 +06 +06 To display the rest FREQ 60 Hz 500 Hz 10 kHz (Frequency) 80 Hz 1 kHz 12.5kHz 100 Hz 1.5kHz 15 kHz 200 Hz 2.5kHz 17.5kHz Q (Band Q1.0 Q0.5 Fix width) Q1.25 Q0.75 Q1.5 Q1.0 Q2.0 Q1.25 3 Exit from the setting. 4 Repeat steps 2 and 3 to adjust other frequency ranges. Storing your own sound modes 5 Sto
ملخص المحتوى في الصفحة رقم 19
The list below shows the preset value setting for each sound mode: Preset values Sound Low Mid High modes Level FREQ Q (Band Level FREQ Q (Band Level FREQ Q (Band (Frequency) width) (Frequency) width) (Frequency) width) FLAT 00 60 Hz Q1.25 00 1 kHz Q1.25 00 10 kHz H.ROCK +03 100 Hz Q1.0 00 1 kHz Q1.25 +02 10 kHz R & B +03 80 Hz Q1.25 +01 1 kHz Q1.25 +03 15 kHz POP +02 100 Hz Q1.25 +01 1 kHz Q1.25 +02 10 kHz JAZZ +03 80 Hz Q1.25 00 1 kHz Q1.25 +03 10 kHz Fix DANCE +04 60 Hz Q1.0 -02 1 kHz Q1.0 +
ملخص المحتوى في الصفحة رقم 20
Category Indications Selectable settings, [reference page] Demo/Link Demo: [Initial]; Display demonstration will be Display activated automatically, [6]. demonstration Image Link: To show a still image while playing MP3/ WMA tracks, [14, 37]. Off: Cancels. • Still image appears if no operation is done for about 20 seconds. LevelMeter You can select the different level meter patterns. Audio level meter Meter 1 [Initial] O Meter 2 • Press DISP repeatedly to show the selected level meter. Pict
