JBL CS200.1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

car audio
power amplifier
owner’s manual
THANK YOU
for purchasing a JBL CS Series amplifier.
In order that we may better serve you should you require
warranty service for your new amplifier, please retain your
original purchase receipt and return the enclosed warranty
registration card.

ملخص المحتوى في الصفحة رقم 2

INSTALLATION WARNING: Playing loud music in an • Before drilling or cutting holes, use a utility POWER CONNECTIONS Remote Connection automobile can hinder your ability to hear knife to remove unwanted fabric or vinyl to Connect the amplifier’s Remote (REM) The CS amplifiers are capable of delivering traffic and permanently damage your keep material from snagging in a drill bit. terminal to the source unit’s Remote Turn-On extremely high power levels, and require a 2 hearing. We recommend listen

ملخص المحتوى في الصفحة رقم 3

APPLICATIONS – CS200.1 The CS subwoofer amplifiers are single-channel amplifiers. There are two sets of terminals to make it easy to connect multiple woofers. Either set of (+/–) terminals may be used when connecting woofers. To the right are two application diagrams to help plan your subwoofer system installation. Figures 2 and 3 show how to configure the CS200.1 subwoofer amplifiers. NOTE: For simplicity, Figures 2 and 3 do not show power, remote and input Figure 2. CS subwoofer amplifier

ملخص المحتوى في الصفحة رقم 4

CONTROLS AND SETUP SPECIFICATIONS Declaration of Conformity SETTING THE SETTING INPUT CS200.1 CROSSOVER(S) SENSITIVITY • 1 x 236W RMS channel at 4 ohms and ≤1% THD + N Determine your system plans and set the 1. Initially turn the INPUT LEVEL control(s) • Signal-to-noise ratio: 100dBA (reference 1W into 4 ohms) crossover mode switch accordingly. If to minimum (counter clockwise). • 1 x 338W RMS channel at 2 ohms, 14.4V supply and you plan to use the CS50.4 to drive full- 2. Reconnect the (–) neg