ملخص المحتوى في الصفحة رقم 1
Thank you for purchasing this Clarion product.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
∗ This manual includes the operating procedures of the CD changer, MD changer, AUX, and TV tuner connected via the CeNET
cable. The CD changer, MD changer and TV tuner have their own manu
ملخص المحتوى في الصفحة رقم 2
2. CONTROLS/COMMANDES/CONTROLES/CONTROLLI 3. PRECAUTIONS 1. When it is very cold in the boat and the unit is used soon after 2. When the boat is traveling in the rough seas the sound may Source unit / Appareil pilote / Unidad fuente / Unità sorgente switching on the heater, the disc and the optical components skip as a result of intense vibrations and shock. may become fogged and not operate properly. Wipe fogged 3. This unit uses a precision mechanism. Even in the event that [ ] RPT discs with
ملخص المحتوى في الصفحة رقم 3
Handling Compact Discs Storage Use only compact discs bearing the or mark. • Do not expose compact discs to direct sunlight or any heat Do not play heart-shaped, octagonal, or other specially shaped source. compact discs. • Do not expose compact discs to excess humidity or dust. Some CDs recorded in CD-R/CD-RW mode may not be usable. • Do not expose compact discs to direct heat from heaters. Handling Cleaning • Compared to ordinary music CDs, CD-R and CD-RW discs are • To remove fingermarks an
ملخص المحتوى في الصفحة رقم 4
4. NOMENCLATURE Note: • Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 3 (unfold). Names of the Buttons and their Functions [ A-M ] button [ PWR ] button • Press and hold the button for 1 second or longer to switch the • Press the button to turn on the power. MAGNA BASS EXTEND on or off. Press and hold the button for 1 second or longer to turn off the power. • Use the button to switch to the audio mode (sub woofer, bass/ treble, balance/fader, Z-Enh
ملخص المحتوى في الصفحة رقم 5
Major Button Operations when External Equipment is Connected to This Unit When the CD/MD changer is connected When the Sirius Satellite Radio is connected ∗ For details, see the section “CD/MD changer operations”. ∗ For details, refer to the Owner’s Manual provided with the Sirius Satellite Radio. [ SCN ] button • Performs scan play for 10 seconds for each track. Disc scan play [ PWR ] button is performed when the button is pressed and held. • Press the button to switch the operation mode amo
ملخص المحتوى في الصفحة رقم 6
Display Items Z-Enhancer Plus indication Operation status indication • Titles, frequency, PS names, clock, etc. are displays. : Preset channel indication (1 to 6) Disc number indication (1 to 6) : SIRIUS indication : Category indication : Disc indication : Scan indication : MAGNA BASS EXTEND indication : Repeat indication : Random indication : Stereo indication : Manual indication : Enter indication : Mute indication LCD Screen In extreme cold, the screen movement may slow down and the screen
ملخص المحتوى في الصفحة رقم 7
a 5. WIRED REMOTE CONTROL UNIT OPERATIONS XMD3 following operations are enabled by remote control with the Wired Remote Control Unit MR301RC (sold separately). WIRED REMOTE CONTROL UNIT Display Items Operation status indication • Frequency, clock, etc. are displays. Preset channel indication (1 to 6) SAT SAT Disc number indication (1 to 6) : Stereo indication [ w ], : SIRIUS indication SAT [ z ] [ ], [ ] : Mute indication [ ] [ ] BAND MUTE [ ] SOURCE Changing the disc (in changer mo
ملخص المحتوى في الصفحة رقم 8
6. OPERATIONS Note: Be sure to read this chapter referring to the front diagrams of chapter Basic Operations “2. CONTROLS” on page 3 (unfold). Main display CAUTION When this unit is turned on, starting and stopping the engine of a boat with its volume raised to the maximum level may harm your hearing. Sub (title) display Be careful about adjusting the volume. IMPORTANT Door must be totally closed to prevent water go into the set! Clock display Main display ∗ Once selected, the preferred display
ملخص المحتوى في الصفحة رقم 9
Basic Operations Adjusting the subwoofer Adjusting the fader When you default select one of mode (LPF50, LPF80, LPF120) 1. Press the [ A-M ] button and select “FAD 0”. ∗ The factory default setting is “S-VOL 0”. (Adjustment range: -6 to +6) 2. Press the [ w ] button emphasizes the sound from the front speaker, press the [ z ] button emphasizes the sound from the 1. Press the [ A-M ] button and select “S-VOL 0”. rear speaker. 2. Press the [ w ] or [ z ] button increases or deceases the ∗ The fact
ملخص المحتوى في الصفحة رقم 10
Radio Operations FM reception Seek tuning ® For enhanced FM performance the tuner includes signal 1. Press the [ BAND ] button and select the desired band (FM or AM). actuated stereo control, Enhanced Multi AGC, Impulse noise reduction ∗ If “MANU” is lit in the display, press and hold the [ BAND ] button curcuits and Multipath noise reduction circuits. for 1 second or longer. “MANU” in the display goes off and seek tuning is now available. Changing the reception area 2. Press the [ a ] or [ d
ملخص المحتوى في الصفحة رقم 11
Radio Operations CD Operations Preset scan Loading a CD Preset scan receives the stations stored in preset memory in order. 1. Open the door by push up the [ HOOK ]. This function is useful when searching for a desired station in 2. Insert a CD into the centre of the [ CD SLOT ] with the label memory. side facing up, and completely close the [ DOOR ]. 1. Press the [ P/A ] button. The CD plays automatically after loading. 2. When a desired station is tuned in, press the [ P/A ] button For 5-inch
ملخص المحتوى في الصفحة رقم 12
CD Operations Operations Common to Each Mode Selecting a track Entering titles Titles up to 8 characters long can be stored in memory and Track-up displayed for CD, CD changer and TV stations. The number of titles 1. Press the [ d ] button to move ahead to the beginning of the that can be entered for each mode are as follows. next track. Mode Number of titles 2. Each time you press the [ d ] button, the track advances ahead to the beginning of the next track. CD mode 50 titles TV mode 20 tit
ملخص المحتوى في الصفحة رقم 13
Operations Common to Each Mode 6. Press the [ s ] button to store the time into memory. Dimmer control You can setting the dimmer control on or off. 7. Press the [ T ] button to return to the previous mode. ∗ The factory default setting is “ON”. Note: 1. Press and hold the [ T ] button for 1 second or longer to switch • You cannot set the clock when it is displayed with only the to the adjustment selection display. ignition on. If you drain or remove the car’s battery or take out this unit, the
ملخص المحتوى في الصفحة رقم 14
7. OPERATIONS OF ACCESSORIES CD/MD Changer Operations CD/MD changer functions Procedure to scroll a title When an optional CD/MD changer is connected through the Set “SCROLL” to “ON” or “OFF”. CeNET cable, this unit controls all CD/MD changer functions. This (The factory default setting is “ON”. Refer to the subsection unit can control a total of 2 changers (MD and/or CD). “Setting the method for Title scroll” in section “Operation Press the [ PWR ] button and select the CD(MD) changer mode to c
ملخص المحتوى في الصفحة رقم 15
CD/MD Changer Operations TV Operations 2. To cancel disc scan play, press the [ SCN ] button again. “DISC” TV tuner functions and “SCN” go off from the display and the current track contin- When an optional TV tuner is connected through the CeNET cable, ues to play. this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor. Repeat play Repeat play continuously plays the current track. This function Watching a TV continues automatically until it is cancelled. 1. Press
ملخص المحتوى في الصفحة رقم 16
TV Operations Recalling a preset station Setting the TV diver A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This You can change the reception setting for the TV antenna con- allows you to select your favorite TV stations and store them in nected to the TV tuner. memory for later recall. 1. Press and hold the [ T ] button for 1 second or longer to switch 1. Press the [ BAND ] button and select the desired TV band (TV1 or TV2). to the adjustment selection display. 2. To recall a store
ملخص المحتوى في الصفحة رقم 17
8. IN CASE OF DIFFICULTY Problem Cause Solution Power does not turn on. (No sound is pro- Fuse is blown. Replace with a fuse of the same amperage. If duced.) the fuse blows again, consult your store of pur- chase. Incorrect wiring. Consult your store of purchase. Compact disc cannot be loaded. Another compact disc is already loaded. Eject the compact disc before loading the new one. Sound skips or is noisy. Compact disc is dirty. Clean the compact disc with a soft cloth. Compact disc is heavily
ملخص المحتوى في الصفحة رقم 18
9. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Error Display Cause Measure ERROR 2 A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. ERROR 6 A CD is loaded upside-down inside the CD deck and Eject the disc then reload it pro
ملخص المحتوى في الصفحة رقم 19
10. SPECIFICATIONS FM Tuner Audio Frequency Range : Maximum Power Output : 208 W (52 W ✕ 4 ch) U.S.A : 87.9 MHz to 107.9 MHz Continuous Average Power Output : Europe : 87.5 MHz to 108.0 MHz 17 W ✕ 4, into 4 Ω , 20 Hz to 20 kHz, 1%THD Australia : 87.0 MHz to 108.0 MHz Bass Control Action (60 Hz) : ±15 dB Usable Sensitivity : 9 dBf Treble Control Action (10 kHz) : ±12 dB 50dB Quieting Sensitivity : 15 dBf Line Output Level (CD 1 kHz) : 2 V Alternate Channel Selectivity : 70 dB Stereo Separation (
ملخص المحتوى في الصفحة رقم 20
XMD3 22
