ملخص المحتوى في الصفحة رقم 1
MXCP44
INSTALLATION/OWNER'S MANUAL
Digital Media Marine Receiver with 6.5" Dual Cone Speakers
ملخص المحتوى في الصفحة رقم 2
MXCP44 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures or where it would be subject to dust, dirt or excessive vibration. Getting Started • Insert the supplied keys into the slots as shown, and slide the unit out of the mounting
ملخص المحتوى في الصفحة رقم 3
MXCP44 INSTALLATION Wiring Diagram FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The MXCP44 uses one 10 amp AGC fuse located in-line. 3
ملخص المحتوى في الصفحة رقم 4
MXCP44 OPERATION Control Locations - Receiver 1 2 3 4 5 15 14 13 12 11 10 9 7 6 17 16 8 Release Preset 4 / Play / Pause 1 10 Power Preset 3 / Intro 2 11 Volume Knob Preset 2 / Random 3 12 Band / Go Back Preset 1 / Repeat 4 13 USB Port Tune / Track Up 5 14 Auxiliary Input 6 Tune / Track Down 15 Tune / Track Up 7 Audio 16 Preset 6 / Folder Up 8 Mode 17 Preset 5 / Folder Down 9 4
ملخص المحتوى في الصفحة رقم 5
MXCP44 OPERATION Control Locations - Remote 1 2 3 5 4 6 17 7 16 8 15 9 14 10 13 11 12 Power Mute 1 10 Tune / Track Down Preset 6 / Folder Up 2 11 Volume Up Preset 4 / Play / Pause 3 12 Select Preset 5 / Folder Down 4 13 Volume Down Preset 1 / Repeat 5 14 Tune / Track Up Preset 2 / Random 6 15 Audio 7 Mode 16 Display 8 Band / Go Back 17 Preset 3 / Intro 9 5
ملخص المحتوى في الصفحة رقم 6
MXCP44 OPERATION General Operation Faceplate Removal Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure. Power On/Off Press or any other button to turn the unit on. Press again to turn the unit off. Mode Press MODE to select between AM/FM, USB, SD or auxiliary input modes. Modes of operation are indicated in the display. SD and USB modes wil
ملخص المحتوى في الصفحة رقم 7
MXCP44 OPERATION General Operation Press the volume knob to select between Bass, Treble, Audio / Menu Balance, Fader, Loudness, Distance and Stereo. BASS TREBLE BALANCE FADER LOUDNESS DISTANCE STEREO Press the volume knob until BAS appears. Bass Rotate the volume knob left/right to adjust. (-7 minimum / +7 maximum) Press the volume knob until TRE appears. Treble Rotate the volume knob left/right to adjust. (-7 minimum / +7 maximum) Press the volume kn
ملخص المحتوى في الصفحة رقم 8
MXCP44 OPERATION Tuner Operation Seek Tuning Press TUNE or TUNE for more than 2 seconds to nn ll seek the next strong station. Manual Tuning Press TUNE or TUNE momentarily to change one nn ll radio frequency at a time. Press and hold to advance quickly. Band Press BAND to select between FM1, FM2, FM3 and AM1, AM2 bands. Six presets can be saved in each band. Storing and Recalling Up to 18 FM stations and 12 AM stations can be
ملخص المحتوى في الصفحة رقم 9
MXCP44 OPERATION SD Card / USB Operation Connecting a USB Device Play MP3/WMA/WAV files from many mass storage devices (sold separately) by connecting them to the MXCP44's USB port. Inserting an SD Card To play MP3/WMA/WAV files from an SD card, insert an (sold separately) SD card into the MXCP44's SD card slot with the label facing left. It will click into place when properly inserted. To remove the card, press in until it cli
ملخص المحتوى في الصفحة رقم 10
MXCP44 OPERATION SD Card / USB Operation Media Compatibility The following types of files are compatible: • MP3 audio • WMA audio • WAV audio The following types of files are not compatible: • WMA files that are protected by DRM (Digital Rights Management) • WMA lossless format • MP3 PRO format, MP3 playlists • AAC, protected AAC, M4A format Playback Order Playback sequence begins in the root folder. Any empty folders or folders
ملخص المحتوى في الصفحة رقم 11
MXCP44 OPERATION SD Card / USB Operation Displaying Information When a file is accessed, the display will alternate between track number/elapsed time and available MP3/WMA information, including file name, song title, artist name, album name and folder number. File Icon This icon will illuminate when the file name is displayed. Song Title Icon This icon will illuminate when the song title is displayed. Artist Icon This icon will illumina
ملخص المحتوى في الصفحة رقم 12
MXCP44 OPERATION Speaker Preparation/Installation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Use extreme caution when drilling holes to avoid damaging fuel lines, hydraulic lines or existing wiring. • If additional wiring is required, we recommend that you run all wires prior to mounting your speaker in place. • Use the highest
ملخص المحتوى في الصفحة رقم 13
MXCP44 OPERATION Radio Specifications FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 10dBf 50dB quieting sensitivity: 25dBf Stereo separation @ 1kHz: >30dB Frequency response: 30Hz-18kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: <36dB Frequency response: 80Hz-2kHz Speakers Outside Diameter: 7.13" Mounting Depth: 2.13" Mounting Height: .87" Cut-out Diameter: 5.13" Frequency Response: 45Hz-15kHz Sensitivity: 88dB 1W/1M Impedance: 4 ohms
ملخص المحتوى في الصفحة رقم 14
MXCP44 WARRANTY Troubleshooting Problem Cause Action Yellow wire not connected or incorrect voltage Check connections for proper Unit will not turn on Red wire not connected or incorrect voltage voltage (11~16VDC) (no power) Black wire not connected Check connection to ground Fuse blown Replace fuse Speaker wires not connected Check connections at speakers Unit has power One or more speaker wires touching each Insulate all bare speaker wires
ملخص المحتوى في الصفحة رقم 15
MXCP44 OPERATION Limited One Year Warranty This warranty gives you specific legal rights. What to do? You may also have other rights which vary from 1. Before you call for service, check the state to state. troubleshooting guide in your owner’s manual. A slight adjustment of any custom Dual Electronics Corp. warrants this product to controls may save you a service call. the original purchaser to be free from defects in material and
ملخص المحتوى في الصفحة رقم 16
Dual Electronics Corp. Toll Free: 1-866-382-5476 9AM-5PM EST, Monday-Friday SD Logo is a trademark of SD-3C, LLC. Other trademarks and trade names are those of their respective owners. www.dualav.com ©2013 Dual Electronics Corp. All rights reserved. NSA0813-V01
