ملخص المحتوى في الصفحة رقم 1
OWNER’S MANUAL
The
Discovery 1100 is
an easy to use detector.
The most difficult aspects of
metal detecting have been automated.
However, if you are new to the hobby,
we strongly recommend that you:
1) Adjust the Sensitivity to a low setting
in the event of false signals. Always begin
use at a reduced sensitivity level; increase to full
sensitivity after you have become familiar with the
detector.
2) Do not use indoors. This detector is for outdoor use only. Many
household appliances emit elec
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS Terminology . . . . . . . . . . . . . . . . . . . . . . . . . .3 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Quick-Start Demo . . . . . . . . . . . . . . . . . . . . .7-8 Basic Operation Powering Up . . . . . . . . . . . . . . . . . . . . . .9 The Display . . . . . . . . . . . . . . . . . . . . .9-10 Mode Control (discrimination) . . . . . . . . . . . .11 Discrimination Settings . . . . .
ملخص المحتوى في الصفحة رقم 3
TERMINOLOGY The following terms are used throughout the manual, and are standard terminology among detectorists. ELIMINATION Reference to a metal being "eliminated" means that the detector will not emit a tone, nor light up an indicator, when a specified object passes through the coil’s detection field. DISCRIMINATION When the detector emits different tones for different types of metals, and when the detector "eliminates" certain metals, we refer to this as the detector "discriminating" among di
ملخص المحتوى في الصفحة رقم 4
ASSEMBLY Assembly is easy and requires no tools. 1 Position the lower stem (the straight tube) ● with the silver button toward the back. Using the bolt and knurled knob, attach the search coil to the plastic extension protruding from the lower stem. 2 Press the button on ● the upper end of the lower stem, and slide the lower stem into the upper stem. Adjust the stem to a length that lets you maintain a comfortable upright posture, with your arm relaxed at your side, and the search coil parallel
ملخص المحتوى في الصفحة رقم 5
ASSEMBLY Adjusting the Arm Rest Most people will find the standard position of the armrest very comfortable. Very large forearms and short forearms (particularly children’s arms), can be accommodated by moving the armrest forward. The armrest is adjustable to three positions. To adjust, press the silver button on the underside, and move the armrest to one of the alternate positions. If you cannot fully depress the button with your finger, use a narrow object, such as the blunt end of a ballpoin
ملخص المحتوى في الصفحة رقم 6
BATTERIES Use ALKALINE batteries only. To install the batteries: 1Remove the ● battery cover by disengaging the clip at the back. 2 Align the polarity ● of the batteries correctly, with the positive "+" toward the coil plug connection, as indicated by the + and – indicators on the housing. 3 Insert (2) 9-Volt ALKALINE batteries, with the contacts pointed inward, ● and press down on the back of the batteries to snap them into place. Some brands of batteries will require moderate force to clear
ملخص المحتوى في الصفحة رقم 7
Q UICK-START DEMONSTRATION I. Supplies Needed • A Nail • A Quarter • A Pull-Tab from a beverage can • A Zinc Penny (dated after 1982) II. Position the Detector a. Place the detector on a table, with the search coil hanging over the edge. (or better, have a friend hold the detector, with the coil off the ground) b. Keep the search coil away from walls, floors, and metal objects. c. Remove watches, rings and other jewelry or metal objects from hands and wrists. d. Turn off appliances or lights tha
ملخص المحتوى في الصفحة رقم 8
Q UICK-START DEMONSTRATION (continued) VI. Press the MODE touchpad again. a. A flashing indicator will point toward IRON. b. The flashing indicator tells us that Iron has been eliminated from detection. VII. Wave the Nail over the Search Coil a. The Nail will not be detected. b. The Nail has been "Discriminated Out." VIII. Wave the Quarter, Penny, and Pull-Tab over the Search Coil These non-ferrous objects will be detected with their own distinctive tones. IX. Press the MODE touchpad again. a.
ملخص المحتوى في الصفحة رقم 9
BASIC OPERATION POWERING UP Press the ON touchpad. All display indicators will illuminate momentarily. The 4-segment pyramid-shaped Sensitivity Indicator will illuminate on the left side of the display. The 4-segment pyramid indicates that the detector is at full sensitivity. When an object is detected, the object will be identified by a tone, a display indicator, and a depth indication. A two-minute “warm-up” is required before the detector reaches full sensitivity. UNDERSTANDING THE DISPLAY
ملخص المحتوى في الصفحة رقم 10
BASIC OPERATION (continued) The RIGHT SIDE of the display classifies objects into three categories. Silver/Copper: ------------------------------------------ Objects composed of silver and cooper will illuminate this arrow. Buried and heavily oxidized metal objects, such as old tin cans, can also fall into this category. Larger aluminum objects, like beverage cans, will sometimes fall into this category. Mid-Range: ------------------------------------------------ Mid-range objects cover a large
ملخص المحتوى في الصفحة رقم 11
BASIC OPERATION (continued) The MODE CONTROL The MODE touchpad allows for the elimination from detection of unwanted metal objects. By pressing MODE, the user toggles among four different discrimination settings. If an object is detected during mode selection, the detector will exit mode selection. If this happens, you will need to press MODE again and begin mode selection over again. To avoid this, keep the detector stationary and reduce sensitivity before pressing MODE. During MODE (or discri
ملخص المحتوى في الصفحة رقم 12
BASIC OPERATION (continued) Discrimination Settings are as follows: Mode Metals Status Display (During discrimination selection) Eliminated Tones No Target All-Metal None High Indicators Flashing Iron Ferrous Low Iron Discrimination only Indicator Flashing Pull-tabs, Screw Mid-Range Caps, some Foil, Mid-Range Discrimination medium Gold, Medium Indicator Zinc, Nickels Flashing Full Ferrous and Low & Iron and DiscriminationMid-Range Medium Mid-Range metals Indicators Flashing 12
ملخص المحتوى في الصفحة رقم 13
AUDIO TARGET IDENTIFICATION While the LCD (Liquid Crystal Display) is very accurate in identifying buried objects, the user in the field does not always maintain the display screen in his field of vision. Therefore, we have incorporated an audio feedback mechanism to alert the user to the nature of buried objects. This audio feedback system first alerts the user to the presence and classification of objects, whose nature and location can be confirmed using the LCD display. The detector will sou
ملخص المحتوى في الصفحة رقم 14
SENSITIVITY ADJUSTMENT ELECTROMAGNETIC INTERFERENCE The principle use for the Sensitivity Control is to eliminate Electromagnetic Interference (EMI). A hobby metal detector is an extremely sensitive device; the search coil creates its own magnetic field and acts like an antenna. If your detector beeps erratically when the search coil is motionless, the unit is probably detecting another magnetic field. Common sources of EMI are electric power lines, both suspended and buried, motors, and househ
ملخص المحتوى في الصفحة رقم 15
IN THE FIELD TECHNIQUES PINPOINTING COIL MOVEMENT When swinging the coil, be Accurate pinpointing takes practice careful to keep it level with the and is best accomplished by “X-ing” the target area. ground about one inch from the surface. Never swing the coil like 1. Once a buried target is indicated a pendulum. by a good tone response, continue sweeping the coil over the target in a narrowing WRONG side-to-side pattern. 2. Take visual note of the place on the ground where the “beep” sounds. 3.
ملخص المحتوى في الصفحة رقم 16
IN THE FIELD TECHNIQUES (continued) Swing the search coil slowly, respond with a repeatable tone. overlapping each sweep as you If the signal does not repeat move forward. It is important after sweeping the coil directly to sweep the coil at a consistent over the suspected target a few speed over the ground as you times, it is more than likely search. After identifying a trash metal. target, your sweep technique can help in identifying both the Crossing the target zone with location and the na
ملخص المحتوى في الصفحة رقم 17
IN THE FIELD TECHNIQUES (continued) you many have encountered You will be surprised just how multiple objects. If you are much trash metal and foil you new to the hobby, you may will find in some areas. The want to dig all targets at first. trashiest areas have been With practice in the field, you frequented by the most people, will learn to better discern the and frequently hold the most nature of buried objects by the promise for finding the most nature of the detector’s lost valuables. To
ملخص المحتوى في الصفحة رقم 18
TROUBLESHOOTING TROUBLE SHOOTING GUIDE SYMPTOM CAUSE SOLUTION Detector chatters • Using detector • Use detector or beeps erratically indoors outdoors only • Using detector near • Move away power lines from power lines • Using 2 detectors in • Keep 2 detectors close proximity at least 20’ apart • Highly oxidized • Only dig up buried object repeatable signals • Environmental • Reduce sensitivity electromagnetic until erratic interference signals cease Constant low tone • Discharged batteries •
ملخص المحتوى في الصفحة رقم 19
CARE AND MAINTENANCE Your Discovery 1100 Metal Detector is an example of superior design and craftsmanship. The following suggestions will help you care for your metal detector so you can enjoy it for years to come. Keep the detector’s chassis dry and do not let water enter it. If the chassis gets wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Use and store the detector only in normal temperature environments. Temperature extremes can short
ملخص المحتوى في الصفحة رقم 20
TREASURE HUNTER’S CODE OF ETHICS: 1. Respect the rights and property of others. 2. Observe all laws, whether national, state or local. 3. Never destroy historical or archaeological treasures. 4. Leave the land and vegetation as it was. Fill in the holes. 5. All treasure hunters may be judged by the example you set. Always obtain permission before searching any site. Be extremely careful while probing, picking up, or discarding trash items. And ALWAYS COVER YOUR HOLES! Limited Ninety-Day Warranty
