ملخص المحتوى في الصفحة رقم 1
R R
EN
FM/AM CD Player FM/AM CD Receiver
CDA-7995/CDA-7894
FR
FM/AM CD Receiver
ES
CDA-7893/CDA-7892
ES
• OWNER'S MANUAL
Please read before using this equipment.
• MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
• MANUAL DE OPERACIÓN
IT
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS, INC. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. ALPINE ELECTRONICS FRANCE S.A.R.L.
Tokyo office: 1-1-8 Nishi Gotanda, 6-8 Fiveways Boulevarde Keysborough, (RCS PONTOISE B 338 101 280)
Shinagawa-k
ملخص المحتوى في الصفحة رقم 2
CHA-S634 CHA-1214 CHM-S630 • CD changer for CDA-7995/CDA- • CD changer for CDA-7995/CDA- 7894/CDA-7893/CDA-7892. 7894/CDA-7893/CDA-7892. • Changeur CD pour CDA-7995/CDA- • Changeur CD pour CDA-7995/CDA- 7894/CDA-7893/CDA-7892. 7894/CDA-7893/CDA-7892. • Cambiador de CD para CDA-7995/ • Cambiador de CD para CDA-7995/ CDA-7894/CDA-7893/CDA-7892. CDA-7894/CDA-7893/CDA-7892. Alpine CD Changers Give You More! More musical selections, more versatility, more convenience. The CHA-S634 is a high-performan
ملخص المحتوى في الصفحة رقم 3
ENGLISH Contents SETUP Operation Operating Instructions Switching the Tuner Mode .............................. 14 Changing Lighting Color (CDA-7894 only)... 14 WARNING Dimmer Control (CDA-7995/CDA-7894/ WARNING ..................................................3 CDA-7893 only) .......................................... 14 CAUTION ...................................................3 Subwoofer On and Off .................................... 14 PRECAUTIONS .........................................
ملخص المحتوى في الصفحة رقم 4
MP3 Operation Installation and Connections Playing MP3 Files (CDA-7995/ Warning ........................................................... 36 CDA-7894 only) .......................................... 24 Caution ............................................................ 36 Playing MP3 Files with the CD Changer Precautions ...................................................... 36 (Optional) .................................................... 24 Installation ....................................
ملخص المحتوى في الصفحة رقم 5
WARNING WARNING CAUTION This symbol means important instructions. Failure This symbol means important instructions. Failure to heed them can result in serious injury or death. to heed them can result in injury or material property damage. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR HALT USE IMMEDIATELY IF A PROBLEM APPEARS. ATTENTION AWAY FROM SAFELY DRIVING YOUR Failure to do so may cause personal injury or damage to the VEHICLE. product. Return it to your authorized Alpine dealer or the neares
ملخص المحتوى في الصفحة رقم 6
WARNING Correct Handling PRECAUTIONS Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or Never Attempt the Following gummed labels to the disc. Do not write on the disc. Do not grip or pull out the disc while it is being pulled back into CORRECT the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. INCORRECT CORRECT Inserting Discs Disc Cleaning Your
ملخص المحتوى في الصفحة رقم 7
Basic Operation Initial System Start-Up Be sure to press the RESET switch when using the unit POWER RESET for the first time, after installing the CD changer, etc., or after changing the car battery. 1 Make sure that the power of the unit is off. If the power is on, press and hold the POWER button for at least 3 seconds to turn off the unit. 2 Press the RESET switch with a ballpoint pen, or any other pointed object. ANGLE 89 Detaching the Front Panel Turning Power On and Off 1 Press and hold the
ملخص المحتوى في الصفحة رقم 8
Basic Operation Displaying Time 1 Press the CLK (clock) button repeatedly until the time g DN BAND MODE (Rotary encoder) is displayed. Each press changes the modes as follows: Radio mode Clock priority → Radio frequency → → TITLE mode mode CD Player/Changer modes f UP X-OVER CENTER f CLK MUTE * DISC TEXT Playing time Clock priority → →→ mode mode mode * TRACK TITLE mode ← ← TEXT mode Adjusting Volume/Balance (Between NOTES Left and Right)/Fader (Between Front • Selecting any tuner or CD functio
ملخص المحتوى في الصفحة رقم 9
Setting the Bass Control 2-2 Setting the treble Level: Turn the Rotary encoder to select the desired Treble Level (–7~+7). You can change the Bass Frequency emphasis to You can emphasize the treble frequency. create your own tonal preference. NOTES • If no buttons are pressed within 5 seconds, the Treble control 1 Press the CENTER f button to select the BASS (bass setting will be turned off automatically. Center frequency) control mode. • The settings of the Treble Level will be individually
ملخص المحتوى في الصفحة رقم 10
Basic Operation Here we calculate the time correction value for the front left speaker in the diagram at the left. BAND Rotary encoder Conditions: Farthest Speaker – listening position : 2.25 m (88-9/16") Front left speaker – listening position : 0.5 m (19-11/16") Calculation: L = 2.25 m – 0.5 m = 1.75 m (68-7/8") Time correction = 1.75 ÷ 343* × 1000 = 5.1 (ms) *Speed of sound: 343 m/s (765 mph) at 20˚C In other words, giving the front left speaker a time correction value of 5.1 ms makes it seem
ملخص المحتوى في الصفحة رقم 11
Example of Steps 2 and 3 Setting Bass Focus (1) After entering corrections for the front (left and right) speakers in STEP 5, the time difference is 1.5 ms for The time difference between the front-rear/left-right both front-left and front-right speakers. speakers, can be adjusted at the same time. With an initial delay of 0.3 ms for each of the 0 to 39 steps, audible time correction can be done. For finer adjustment, use the procedure in the previous section "Time Correction," for which the del
ملخص المحتوى في الصفحة رقم 12
Basic Operation Setting the MX Mode MX (Media Xpander) makes vocals or instruments BAND DISP/B. OUT Rotary encoder/Q. S. SOURCE sound distinct regardless of the music source. The radio, CD, and MP3, will be able to reproduce the music clearly even in cars with a lot of road noise. 1 Press the MX button to select MX ON. 2 Press the SOURCE button to select the source you want to MX (Media Xpander)-correct. T.CORR MX 3 Press and hold the MX button for at least 2 seconds to select the MX mode. Time
ملخص المحتوى في الصفحة رقم 13
Quick Searching Function Changing the Audio Level Display Pattern You can easily select tracks and files. You can select the Audio Level Display from three 1 Press the SOURCE button to set the desired source display patterns (For the CDA-7892 model, only pattern mode. 1 is displayed). You can also deactivate the display. ( CD mode is explained here as an example) 2 When setting the CD mode, press and hold the Q.S. 1 Press DISP button to switch the display pattern. button for at least 2 seconds.
ملخص المحتوى في الصفحة رقم 14
Basic Operation MP3 mode: (MP3 files can be played back with the CDA-7893/CDA-7892 models if an MP3 compatible changer is connected.) -/J BAND Rotary encoder ↓ ELAPSED TIME DISPLAY ↓ CLOCK DISPLAY ↓ FOLDER NAME DISPLAY ↓ FILE NAME DISPLAY ↓ ∗2 ID3 TAG DISPLAY ↓ g DN f UP TITLE ∗3 FRAME DISPLAY ∗1 Displayed during playback of a disc with CD Text. “ NO TEXT” will be displayed when the CD contains Displaying the Title/Text no Text data. Text cannot be displayed for the CDA-7893/CDA- It is po
ملخص المحتوى في الصفحة رقم 15
Titling Discs/Stations Erasing Disc Title/Station Title 1 Press the TITLE button to select the titling mode. Then, It is possible to title your favorite CD's or radio stations. press and hold for at least 3 seconds. You cannot input titles on MP3 discs (Except when a changer is connected). 2 Press and hold the -/J button for at least 2 seconds to activate the title scanning mode. The title in the 1 Press the TITLE button and select the title display display will blink. mode. For details, see “Di
ملخص المحتوى في الصفحة رقم 16
SETUP Operation Dimmer Control (CDA-7995/CDA-7894/CDA-7893 only) SOURCE BAND MODE/Rotary encoder Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's backlighting is too bright at night. 1 Press and hold the SETUP button for at least 3 seconds. g DN f UP SETUP 2 Press the f UP or g DN button to select “DIM”(DIMMER). Switching the Tuner Mode 3 Press the BAND button to select the Dimme
ملخص المحتوى في الصفحة رقم 17
Sound (Beep) Guide Function 3 Press the BAND button to toggle the mode between SCR AUTO and MANUAL (For CDA-7892 model: MANU is displayed). This function will give audible feedback with varying tones depending upon the button pressed. • SCR AUTO: the CD text information, the text information of folder and file names, and the ID3 1 Press and hold the SETUP button for at least 3 tags are scrolled automatically. seconds. • SCR MANUAL: the display is scrolled only when a disc is loaded or when a tra
ملخص المحتوى في الصفحة رقم 18
SETUP Operation PWR-IC ON (CDA-7892: PWR ON): The speakers are driven by the built-in amplifier. BAND Rotary encoder Speakers SPEAKER RIGHT FRONT Front right SPEAKER RIGHT REAR Rear right g DN f UP SETUP SPEAKER LEFT REAR Rear left SPEAKER Connecting to an External Amplifier LEFT FRONT Front left (CDA-7894/CDA-7893/CDA-7892 only) NOTE When an external amplifier is connected, sound quality No sound is produced by the system when the power output is set can be improved by stopping the power
ملخص المحتوى في الصفحة رقم 19
Demonstration Adjusting Display Contrast (CDA-7995 only) This unit has a Demonstration feature which simulates the You can adjust the display contrast for better visibility. display functions. 1 Press and hold the SETUP button for at least 3 1 Press and hold the SETUP button for at least 3 seconds. seconds. 2 Press the f UP or g DN button to select the 2 Press the f UP or g DN button to select DEMO mode. “CONTRAST.” 3 Press the BAND button to turn on or off the DEMO 3 Turn the Rotary encoder to
ملخص المحتوى في الصفحة رقم 20
Radio Operation 3 Press the TUNE button to illuminate the DX and SEEK indicators in the display. With the DX (Distance) mode activated, both strong SOURCE TUNE/A.ME BAND and weak stations will be tuned in the Auto-Seek operation. Press again to return to the local mode. The DX indicator will turn off and the SEEK indicator will remain illuminated. Now, only strong stations will be tuned. 4 Press the g DN or f UP button to automatically seek for a station downward or upward respectively. g DN f
