ملخص المحتوى في الصفحة رقم 1
R
MP3/WMA/AAC CD Receiver
CDE-100EUB/CDE-100E
• OWNER’S MANUAL
Please read before using this equipment.
ALPINE ELECTRONICS OF ASIA PACIFIC CO.,LTD. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
555 Rasa Tower 1, Unit 2601-2602, 26th Floor, 161-165 Princes Highway, Hallam
Phaholyothin Road, Chatuchak, Chatuchak, Bangkok 10900, Thailand Victoria 3803, Australia
Phone 02-937-0505 Phone 03-8787-1200
www.alpine-asia.com www.alpine.com.au
YAMAGATA (Wuxi) Co., Ltd.
Designed by ALPINE Japan
Block 28-25, Cha
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Operating Instructions DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN WARNING INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the product. WARNING CAUTION This symbol means important instructions. This symbol means important instructions. Failure to heed them can result in serious injury Failure to heed them can result in injury or or death. material property damage. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR HALT USE IMMEDIATELY IF A PROBLEM APPEARS. ATT
ملخص المحتوى في الصفحة رقم 4
Never Attempt the Following Installation Location Do not grip or pull out the disc while it is being pulled back into the Make sure this unit will not be installed in a location subjected to: player by the automatic reloading mechanism. � Direct sun and heat Do not attempt to insert a disc into the unit when the unit power is � High humidity and water off. � Excessive dust � Excessive vibrations Correct Handling Do not drop the disc while handling. Hold the disc so you will not leave fingerpr
ملخص المحتوى في الصفحة رقم 5
On handling Compact Discs (CD/CD-R/CD-RW) � Do not touch the surface. CAUTION � Do not expose the disc to direct sunlight. Alpine accepts no responsibility for lost data, etc., even if data, etc. � Do not affix stickers or labels. is lost while using this product. � Clean the disc when it is dusty. � Make sure that there are no bumps around the disc. On Handling USB Memory � Do not use commercially available disc accessories. � To prevent malfunction or damage, note the following points. Read t
ملخص المحتوى في الصفحة رقم 6
Attaching Getting Started 1 Insert the left side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. 2 Push the right side of the front panel until it locks SOURCE/ firmly into the main unit. Rotary encoder VIEW � Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. * This illustration is CDE-100EUB. � Attach the fron
ملخص المحتوى في الصفحة رقم 7
Presetting Stations Automatically Radio 1 Press BAND/ / repeatedly until the desired radio SOURCE/ band is displayed. BAND/ / A.ME 2 Press and hold A.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The radio will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength. � If no stations are stored, the radio will return to the origin
ملخص المحتوى في الصفحة رقم 8
3 Press or to select the desired track (file). Returning to the beginning of the current track (file): CD/MP3/WMA/AAC Press . Fast backward: SOURCE/ Press and hold . BAND/ / Advancing to the beginning of the next track (file): Press . Fast forward: Press and hold . 4 To pause playback, press BAND/ / . Pressing BAND/ / again will resume playback. 5 To eject the disc, press . 4(M.I.X.) 6(RPT) � Do not remove a CD during its eject cycle. Do not load more than 5(SCAN) one disc at a time. A m
ملخص المحتوى في الصفحة رقم 9
M.I.X. (Random Play) About MP3/WMA/AAC Press 4(M.I.X.) in the play or pause mode. The “ M.I.X.” indicator lights up, and the tracks (files) on the CAUTION disc will be played back in random sequence. Except for private use, duplicating audio data (including MP3/WMA/AAC data) or distributing, transferring, or copying it, Press 4(M.I.X.) again to cancel. whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international
ملخص المحتوى في الصفحة رقم 10
Supported playback sampling rates and bit rates Order of files Files are played back in the order that the writing software writes MP3 them to the disc. Therefore, the playback order may not be what Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, is expected. Verify the writing order in the software’s 16 kHz, 12 kHz, 11.025 kHz, 8 kHz documentation. The playback order of the folders and files is as Bit rates: 8 - 320 kbps follows. WMA Sampling rates: 48 kHz, 44.1 kHz, 32 kHz Bi
ملخص المحتوى في الصفحة رقم 11
Equalizer Presets (Factory’s EQ) Sound Setting 6 typical equalizer settings are preset at the factory for a variety of musical source material. Rotary encoder (AUDIO) Press SOUND repeatedly until the desired Factory’s EQ type is displayed. With each press of the button, the equalizer mode will display the selected equalizer characteristic. FLAT(OFF) ROCK POP JAZZ VOCAL CLUB FLAT(OFF) SOUND * This illustration is CDE-100EUB. Adjusting Bass Level/Treble Level/ Balance (Between Left a
ملخص المحتوى في الصفحة رقم 12
Displaying Time Other Functions Press VIEW repeatedly until the time is displayed. Each press changes the display. For details, see “Displaying the Text”. SOURCE/ � Selecting any radio or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display. Using the Front AUX Input Terminal VIEW 3(SCROLL) Connect a portable music player, etc. by simply connecting it to the
ملخص المحتوى في الصفحة رقم 13
USB Memory Connection (Optional) USB memory (Optional) Connect USB memory CDE-100EUB Only 1 Open the cover of the USB connection terminal. 2 Connect the USB memory directly to the USB connection terminal, or via the USB cable. SOURCE/ BAND/ / This unit USB Connection Terminal USB memory (Sold Separately) or Cable (Sold USB memory Controlling USB memory (Optional) Separately) (Sold Separately) A USB memory device may be connected to this unit. With USB Remove USB memory memory connected, pl
ملخص المحتوى في الصفحة رقم 14
CD Information CD Player not functioning. � Out of operating temperature range +70°C (+158°F) for CD. - Allow the vehicle’s interior (or trunk) temperature to cool. In Case of Difficulty CD playback sound is wavering. � Moisture condensation in the CD Module. If you encounter a problem, please turn the power off, then on again. If - Allow enough time for the condensation to evaporate (about 1 the unit is still not functioning normally, please review the items in the hour). following checklist
ملخص المحتوى في الصفحة رقم 15
Indication for CD Player Indication for USB memory � The disc is dirty or upside down. � No song (file) is stored in the USB memory. - Press the button and eject the CD. - Connect the USB memory device after storing songs (files). If not ejecting, consult your Alpine dealer. � A USB device that is not supported by the unit is connected. - Connect a USB device that is supported by the unit. � The disc has scratches. - Press the button and eject the CD. � Abnormal current is run to the USB conne
ملخص المحتوى في الصفحة رقم 16
GENERAL Specifications Power Requirement 12 V DC (11-16 V allowable), Test voltage 14.4 V, Negative FM RADIO SECTION ground Tuning Range 87.5-108.0 MHz Current Consumption Less than 2.1 A (CD mode; Usable Sensitivity 5 dB/µV (S/N 30 dB) 0.5 W × 4) Frequency Response 30-15,000 Hz (±3 dB) Maximum Power Output 50 W × 4 (at 1 kHz) Alternate Channel Selectivity 75 dB volume control maximum Stereo Separation 30 dB Power Output 18 W × 4 (1 kHz, 1 %, 4 Image Rejection Ratio 70 dB ohms) IF Rejection
ملخص المحتوى في الصفحة رقم 17
Installation and Connections Before installing or connecting the unit, please read the following and “Operating Instructions” of this manual Caution thoroughly for proper use. HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical Warning skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done. MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections m
ملخص المحتوى في الصفحة رقم 18
2 Installation Screw Hex Nut (M5) Caution Do not block the unit's heat sink, thus preventing air circulation. If *2 Bolt Stud blocked, heat will accumulate inside the unit and may cause a fire. (Included) Heat sink Metal Mounting Strap 1 * This unit * This illustration is CDE-100EUB Ground Lead Chassis Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle’s chassis. D
ملخص المحتوى في الصفحة رقم 19
Connections Antenna Blue ANT CONT To power antenna CDE-100EUB Blue/White AMP CONT only To amplifier Red IGNITION Ignition Key Yellow BATTERY Black GND Battery Gray Speakers SPEAKER RIGHT FRONT Front Right Gray/Black Violet/Black SPEAKER RIGHT REAR Rear Right Violet Green SPEAKER LEFT REAR Rear Left Green/Black White/Black SPEAKER LEFT FRONT Front Left White Speakers Rear Left Amplifier Rear Right CDE-100EUB only CDE-100EUB only
ملخص المحتوى في الصفحة رقم 20
1 Antenna Receptacle qs Left Rear (+) Speaker Output Lead (Green) 2 ANT CONT Lead (Blue) qd Left Rear (–) Speaker Output Lead (Green/Black) Connect this lead to the +B terminal of your power antenna, qf Left Front (–) Speaker Output Lead (White/Black) if applicable. qg Left Front (+) Speaker Output Lead (White) � This lead should be used only for controlling the vehicle’s power qh Fuse Holder (15A) antenna. Do not use this lead to turn on an amplifier etc. qj Rear Output RCA Connectors (CDE-10
