ملخص المحتوى في الصفحة رقم 1
2-653-153-11 (1)
FM/AM
Compact Disc Player
US
Operating Instructions
ES
Manual de instrucciones
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. CDX-GT30W Serial No.
To cancel the demonstration (DEMO) display, see page 10.
Para cancelar la pantalla de demostración (
ملخص المحتوى في الصفحة رقم 2
Welcome ! Warning Thank you for purchasing this Sony Compact This equipment has been tested and found to Disc Player. You can enjoy your drive with the comply with the limits for a Class B digital following functions. device, pursuant to Part 15 of the FCC Rules. CD playback These limits are designed to provide reasonable You can play CD-DA (also containing CD protection against harmful interference in a TEXT*), CD-R/CD-RW (MP3/WMA files also residential installation. This equipment containing
ملخص المحتوى في الصفحة رقم 3
Table of Contents Getting Started Other functions Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4 Changing the sound settings . . . . . . . . . . . . . . . 9 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4 Adjusting the sound characteristics Detaching the front panel . . . . . . . . . . . . . . . . . 4 — BAL/FAD/SUB. . . . . . . . . . . . . . . . . . . . 9 Attaching the front panel . . . . . . . . . . . . . . . 5 Customizing the equalizer curve Inserting
ملخص المحتوى في الصفحة رقم 4
Getting Started Detaching the front panel You can detach the front panel of this unit to Resetting the unit prevent theft. Before operating the unit for the first time, or Caution alarm after replacing the car battery or changing the If you turn the ignition switch to the OFF connections, you must reset the unit. position without detaching the front panel, the Detach the front panel and press the RESET caution alarm will sound for a few seconds. button with a pointed object, such as a ball
ملخص المحتوى في الصفحة رقم 5
Attaching the front panel Inserting the disc in the unit Place the hole A of the front panel onto the spindle B on the unit, then lightly push the left 1 Press (OPEN). side in. 2 Insert the disc (label side up). Press (SOURCE) on the unit (or insert a disc) to operate the unit. A B 3 Close the front panel. Playback starts automatically. Ejecting the disc 1 Press (OPEN). 2 Press Z. The disc is ejected. x 3 Close the front panel. Note Do not put anything on the inner surface of the front panel.
ملخص المحتوى في الصفحة رقم 6
Location of controls and basic operations Main unit CDX-GT30W Front panel removed qk ql w; RESET Refer to the pages listed for details. The Card remote commander corresponding buttons on the card remote RM-X151 commander control the same functions as those on the unit. wd 1 OFF ATT A OFF button wf To power off; stop the source. qs SOURCE SEL MODE B Volume control dial/select button 9 qd wa To adjust volume (rotate); select setup items + (press and rotate). C Receptor for the card remote w
ملخص المحتوى في الصفحة رقم 7
2 3 4 H GP* /ALBM* +/– buttons* T Disc slot 5 To skip groups/albums (press); skip groups/ To insert the disc. albums continuously (press and hold). The following buttons on the card remote I SEEK –/+ buttons commander have also different buttons/functions from the unit. CD: To skip tracks (press); skip tracks wa < (.)/, (>) buttons continuously (press, then press again within To control CD/radio, the same as (SEEK) about 1 second and hold); reverse/fast- –/+ on the unit. forward a track (p
ملخص المحتوى في الصفحة رقم 8
CD Radio For details on selecting a CD/MD changer, see Storing and receiving stations page 10. Caution Display items When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM 1 Press (SOURCE) repeatedly until “TUNER” appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. A ATRAC CD indication 2 Press and hold (BTM) until “BTM” B Source flashes. C WMA/MP3/BBE MP indication The unit st
ملخص المحتوى في الصفحة رقم 9
Tip Other equalizer types are also adjustable. Other functions With the card remote commander Changing the sound settings In step 3, to adjust the selected item, press <, M, , or m. Adjusting the sound Adjusting setup items — SET characteristics — BAL/FAD/SUB You can adjust the balance, fader, and subwoofer 1 Press and hold the select button. volume. The setup display appears. 1 Press the select button repeatedly 2 Press the select button repeatedly until “BAL,” “FAD” or “SUB” appears. unti
ملخص المحتوى في الصفحة رقم 10
1 Adjust the volume level DEMO* (Demonstration) To set “DEMO-ON” (z) or “DEMO-OFF.” Be sure to adjust the volume for each connected A.SCRL (Auto Scroll) audio device before playback. To scroll long displayed item automatically 1 Turn down the volume on the unit. when the disc/group/track/album is changed. 2 Press (SOURCE) repeatedly until “AUX – “A.SCRL-ON”: to scroll. FRONT IN” appears. – “A.SCRL-OFF” (z): to not scroll. 3 3 Start playback of the portable audio device at a LPF* (Low Pass Fi
ملخص المحتوى في الصفحة رقم 11
DSPL MODE SEL Repeat and shuffle play PRESET/DISC control The same as (GP/ALBM) +/– on the unit (push 1 During playback, press (3) (REP) or (4) in and rotate). (SHUF) repeatedly until the desired setting VOL (volume) control appears. The same as the volume control dial on the unit (rotate). Select To play SEEK/AMS control 1 REP-DISC* disc repeatedly. The same as (SEEK) –/+ on the unit (rotate, or rotate and hold). SHUF- tracks in the changer in random 1 CHGR* order. Changing the oper
ملخص المحتوى في الصفحة رقم 12
Before playing, clean the discs Additional Information with a commercially available cleaning cloth. Wipe each disc from the center out. Do not use Precautions solvents such as benzine, thinner, commercially available If your car has been parked in direct sunlight, cleaners, or antistatic spray allow the unit to cool off before operating it. intended for analog discs. Power antenna will extend automatically while the unit is operating. Notes on CD-R/CD-RW discs Some CD-Rs/CD-RWs
ملخص المحتوى في الصفحة رقم 13
For details on ATRAC CD, see the SonicStage or Playback order of MP3/WMA files SonicStage Simple Burner manual. Folder MP3/WMA (album) Note Be sure to create the ATRAC CD using authorized MP3/WMA file software, such as SonicStage 2.0 or later, or (track) SonicStage Simple Burner 1.0 or 1.1. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer. Maintenance Replacing the lithium battery of the card remote commander
ملخص المحتوى في الصفحة رقم 14
Cleaning the connectors 2 Remove the unit. The unit may not function properly if the connectors 1Insert both release keys simultaneously between the unit and the front panel are not clean. In until they click. order to prevent this, detach the front panel (page 4) and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, Hook facing the connectors may be damaged. inwards. 2Pull the release keys to unseat the unit. Main unit Back of the front p
ملخص المحتوى في الصفحة رقم 15
Frequency response: 30 – 15,000 Hz AM Tuning range: 530 – 1,710 kHz Antenna terminal: External antenna connector Intermediate frequency: 10.7 MHz/450 kHz Lead-free solder is used for soldering certain parts. Sensitivity: 30 µV (more than 80 %) Halogenated flame retardants are not used in the Power amplifier section certain printed wiring boards. Halogenated flame retardants are not used in Outputs: Speaker outputs (sure seal connectors) cabinets. Speaker impedance: 4 – 8 ohms VOC (Vola
ملخص المحتوى في الصفحة رقم 16
The display disappears from/does not appear Radio reception in the display window. The stations cannot be received. The dimmer is set “DIM-ON” (page 9). The sound is hampered by noises. The display disappears if you press and hold (OFF). Connect a power antenna control lead (blue) or tPress and hold (OFF) on the unit until the accessory power supply lead (red) to the power display appears. supply lead of a car’s antenna booster (only when The connectors are dirty (page 14). your car
ملخص المحتوى في الصفحة رقم 17
*1 If an error occurs during playback of a CD or MD, LOAD the disc number of the CD or MD does not appear The changer is loading the disc. in the display. t Wait until loading is complete. *2 The disc number of the disc causing the error L. SEEK +/– appears in the display. The local seek mode is on during automatic tuning. If these solutions do not help improve the situation, NO DISC consult your nearest Sony dealer. The disc is not inserted in the CD/MD changer. If you take the unit to be r
ملخص المحتوى في الصفحة رقم 18
Bienvenido Para obtener información sobre la instalación y las conexiones, consulte el manual de Gracias por adquirir este reproductor de discos instalación/conexiones suministrado. compactos Sony. Mientras maneja puede disfrutar de las funciones siguientes: • Reproducción de CD Advertencia: si el encendido del Puede reproducir CD-DA (incluidos CD automóvil no dispone de una posición TEXT*), CD-R/CD-RW (archivos MP3/WMA, ACC incluidos también Multi Session (página 14)) y Tras apagar el
ملخص المحتوى في الصفحة رقم 19
Tabla de contenido Procedimientos iniciales Otras funciones Restauración de la unidad . . . . . . . . . . . . . . . . . 4 Cambio de los ajustes de sonido . . . . . . . . . . . 10 Ajuste del reloj . . . . . . . . . . . . . . . . . . . . . . . . . 4 Ajuste de las características del sonido Extracción del panel frontal. . . . . . . . . . . . . . . . 4 — BAL/FAD/SUB. . . . . . . . . . . . . . . . . . . 10 Colocación del panel frontal . . . . . . . . . . . . . 5 Personalización de la curva de ecuali
ملخص المحتوى في الصفحة رقم 20
Procedimientos iniciales Extracción del panel frontal Puede extraer el panel frontal de la unidad para Restauración de la unidad evitar que la roben. Antes de utilizar la unidad por primera vez, o Alarma de precaución después de sustituir la batería del automóvil o de Si gira la llave de encendido hasta la posición cambiar las conexiones, debe restaurarla. OFF sin haber extraído el panel frontal, la alarma Extraiga el panel frontal y presione el botón de precaución sonará durante unos segu
