ملخص المحتوى في الصفحة رقم 1
Video Cassette Recorder
W-717
OWNER’S MANUAL
SQPB
3
ABLE BOX
ONTROL
W717
W-717/Eng (1-9) 1 9/1/01, 10:38 AM
ملخص المحتوى في الصفحة رقم 2
SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s en- closure that may be of sufficient magnitude to constitute a risk of electric shock to per- sons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte- nance (servicing) instructions in the literature accompanying the app
ملخص المحتوى في الصفحة رقم 3
INTRODUCTION IMPORTANT PRECAUTIONS Save Original Packing Materials The original shipping carton and packing materials will come in handy if you ever have to ship your VCR. For maximum protection, repack the set as it was originally packed at the factory. Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will mar the finish. Moisture Condensation Never operate this unit immedia
ملخص المحتوى في الصفحة رقم 4
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does
ملخص المحتوى في الصفحة رقم 5
INTRODUCTION 6. Water and Moisture Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool and the like. 7. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 8. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against the
ملخص المحتوى في الصفحة رقم 6
IMPORTANT SAFETY INSTRUCTIONS 12. Lightning For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 13. Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fir
ملخص المحتوى في الصفحة رقم 7
INTRODUCTION Contents INTRODUCTION Variable Speed Playback ................. 20 Provides important notes and general explanation of the VCR, including names of the • Picture Search buttons, jacks, etc. • Still Picture • Frame Advance SAFETY PRECAUTIONS .................... 2 • Slow-motion Picture IMPORTANT PRECAUTIONS ............. 3 IMPORTANT SAFETY Useful Functions in Tape INSTRUCTIONS ................................... 4 Operation ........................................... 22 Contents .....
ملخص المحتوى في الصفحة رقم 8
INTRODUCTION Identification of Controls See the page in for details. This manual shows the names of buttons in italics. Front Panel FWD REV CHANNEL Cassette compartment STOP 19 19 24 POWER 18 19 PLAY 19 EJECT 14 18 20 SHUTTLE LINE IN 2 24 Remote LINE IN 2 VIDEO jack REC 10 PAUSE/STILL 20 Sensor 9 LINE IN 2 AUDIO VCR Display (L/MONO, R) jacks Remote Control POWER VCR To operate this VCR. 14 VCR TV 14 POWER To operate your TV. TV 41 CH/TRK 1 2 3 19 CH/TRK Number buttons 456 17 17 100 TV VOL 7 8
ملخص المحتوى في الصفحة رقم 9
INTRODUCTION VCR Display Hi-Fi indicator Cassette indicator Timer recording indicator TIMER Hi-Fi SAP VCR VCR indicator SAP indicator Multifunctional indicator Rear Panel RF IN (FROM ANT.) terminal LINE OUT AUDIO jacks (L, R) LINE IN 1 AUDIO jacks (L, R) LINE LINE IN OUT IN 1 (FROM ANT.) R AUDIO L OUT RF VIDEO (TO TV) CH 34 LINE IN 1 VIDEO jack LINE OUT VIDEO jack To wall outlet CH selector (3/4) RF OUT (TO TV) terminal LINE IN 1 AUDIO (Rear), 2 (Front) jacks If the connected equipment is monaur
ملخص المحتوى في الصفحة رقم 10
PREPARATION How to Use the Remote Control This section explains how to get ready for remote control operation. Setting up the Remote Control Open the battery compartment lid on the 1 rear panel. Install 2 batteries (“AAA” size) following 2 the polarity diagrams. Close the battery compartment lid. 3 Point the remote control at the VCR and press the buttons within the operating range. 4 Distance: within about 7 m from the front of the remote sensor Angles: within about 30˚ in every direction Notes
ملخص المحتوى في الصفحة رقم 11
PREPARATION PREPARATION Connections Before you use this VCR, it is necessary to connect it to your TV. Several ways of connecting are available depending on your use of TV or cable box. Select one which is applicable to your equipment. Antenna/VCR/TV Connection Disconnect the antenna cable from your TV and connect it to the RF IN terminal on the 1 VCR. Connect the RF OUT terminal to the TV. 2 VHF/UHF VHF antenna UHF antenna combination antenna only only IN LINE LINE IN (FROM ANT.) OUT IN 1 (FR
ملخص المحتوى في الصفحة رقم 12
Connections (continued) This set-up will enable you to: – record an unscrambled channel. LINE LINE IN OUT IN 1 (FROM ANT.) R AUDIO – watch an unscrambled channel while recording it. L OUT RF VIDEO (TO TV) CH – record an unscrambled channel while watching 34 another (scrambled or unscrambled). Cable box You will need to: Incoming cable IN OUT • set TV channel to the output channel of the cable box. • turn on the cable box and select cable channel 3 or 4 according to the output channel of the VCR.
ملخص المحتوى في الصفحة رقم 13
PREPARATION PREPARATION Auto Set Up The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet. Auto Set up Plug the VCR into the AC outlet 1 “Auto” blink while the VCR automatically sets the clock using 2 12 3 the data broadcast by the local TV stations. 4 56 7 8 9 While “Auto” is blinking, channel memory is also set 0 100 automatically. SLOW PLAY/x2 PAUSE/STILL CURSOR REW FF STOP CANCEL CH CABLE BOX VC-717 When Auto set up has been completed, the VCR
ملخص المحتوى في الصفحة رقم 14
PREPARATION Initial Settings Using On-screen Display The language selection and clock setting must be set first when VCR is first plugged in or after it encounters a power failure. Preparation • Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 11). • Press VCR to set the remote control operating the VCR. Setting the Language VCR Press POWER to turn on the VCR. 1 POWER 12 3 Press PROG.. 2 4 56 The following screen appears
ملخص المحتوى في الصفحة رقم 15
PREPARATION Press ENTER to start the “AUTO” clock Setting the Clock 8 set feature. Example: To set the clock to 2:30 p.m. on After the VCR is turned off, it automatically August 25 (summer time) 2001. updates the clock using the data broadcast by the local TV stations. Press PROG.. 1 *The clock is The MENU screen appears on the TV. revised by broadcasting Select “PRESET” using FF or REW, 2 CLOCK SET signal at 8:00 A.M SUMMER TIME and press ENTER. TIME ZOnE CH every morning. SCAnnInG
ملخص المحتوى في الصفحة رقم 16
PREPARATION Storing Channels on the VCR This section is required if you receive only normal TV or unscrambled cable channels, or use a cable box between your TV and the VCR. Incoming Antenna/Cable(CATV) Signals The VCR scans through all receivable TV and CATV channels and stores only the active ones in your area into the memory. Once the storing is finished, you can select a desired channel using CH/TRK. Preparation • Turn on the TV, and select the video channel (3 or 4), or the video input mod
ملخص المحتوى في الصفحة رقم 17
PREPARATION 3) Enter a channel number of 1 to 125 using Adding or erasing channels number buttons. Adding channels For more than 100 number, first press 100. If a desired channel cannot be scanned For CATV channels, refer to the chart below. automatically because of a weak signal, it can be (For other orders, check with your cable added to the memory. company.) Erasing channels 4) Repeat steps 2) and 3) to add or erase You can erase a stored channel from the memory channels as necessary. if it i
ملخص المحتوى في الصفحة رقم 18
PREPARATION Video Cassette Use Video Cassette Use Loading a cassette Push the cassette into the cassette compartment with the window side facing up and the label side towards the front. The VCR is automatically turned on. The indicator will appear in the VCR display. Ejecting a cassette Press EJECT. The cassette is ejected from the cassette compartment. Warning Do not insert your hands or any foreign objects into the compartment. This may result in injury or damage. Take special
ملخص المحتوى في الصفحة رقم 19
PLAYBACK PLAYBACK Playback This section explains the basic playback operation. Preparation • Select the video channel (3 or 4) or video input mode on the TV. • Press VCR to set the remote control operating the VCR. Basic Playback Load a recorded cassette. 1 TIMER Power is turned on. SLP S 12 3 If the cassette has no safety tab, REC L VCR CH/TRK 4 56 playback starts automatically. 9 7 8 0 100 Press PLAY/x2 to start playback. 2 TIMER PLAY/x2 SLOW PAUSE/STILL REC L VCR CURSOR CURSOR 2,3 REW FF ST S
ملخص المحتوى في الصفحة رقم 20
PLAYBACK Variable Speed Playback You can play back a tape at various tape speeds. Picture Search A tape runs at 5 times or 7 times the normal playback speed so that you can quickly locate a particular scene. 12 3 Press FF or REW during playback. 4 56 1 7 8 9 The tape runs at 5 times the normal playback speed. 100 0 To change the tape speed to 7 times the normal playback PLAY/x2 2 PLAY/x2 SLOW PAUSE/STILL speed, press and hold FF or REW. PAUSE/STILL CURSOR CURSOR REW FF If you release it, the tap
