ملخص المحتوى في الصفحة رقم 1
Video Cassette Recorder
W-412
OWNER’S MANUAL
AUTO CLOCK SET
HEAD
4 VIDEO SYSTEM
W-412 (ENG)* 1 1/17/01, 9:50 AM
ملخص المحتوى في الصفحة رقم 2
SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s en- closure that may be of sufficient magnitude to constitute a risk of electric shock to per- sons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte- nance (servicing) instructions in the literature accompanying the app
ملخص المحتوى في الصفحة رقم 3
INTRODUCTION IMPORTANT PRECAUTIONS Save Original Packing Materials The original shipping carton and packing materials will come in handy if you ever have to ship your VCR. For maximum protection, repack the set as it was originally packed at the factory. Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will mar the finish. Moisture Condensation Never operate this unit immedia
ملخص المحتوى في الصفحة رقم 4
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does
ملخص المحتوى في الصفحة رقم 5
INTRODUCTION 6. Water and Moisture Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool and the like. 7. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 8. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against the
ملخص المحتوى في الصفحة رقم 6
IMPORTANT SAFETY INSTRUCTIONS 12. Lightning For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 13. Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fir
ملخص المحتوى في الصفحة رقم 7
Contents INTRODUCTION Variable Speed Playback ................. 20 Provides important notes and general • Picture Search explanation of the VCR, including names of the • Still Picture buttons, jacks, etc. • Frame Advance • Slow-motion Picture SAFETY PRECAUTIONS .................... 2 IMPORTANT PRECAUTIONS ............. 3 Useful Functions in Tape IMPORTANT SAFETY Operation ........................................... 22 INSTRUCTIONS ................................... 4 • Counter Function Contents
ملخص المحتوى في الصفحة رقم 8
INTRODUCTION Identification of Controls See the page in for details. This manual shows the names of buttons in italics. Cassette compartment EJECT Front Panel CHANNEL 18 18 POWER 14 24 STOP 19 19 Remote 24 REW VCR Display Sensor 19 19 REC PLAY FF Remote Control TV 28 14 POWER To operate your TV VCR TV POWER 19 CH/TRK To operate this VCR. VCR 14 Number buttons 1 2 3 17 4 5 6 100 17 9 7 8 EJECT 18 0 100 14 ENTER REW * 19 VC-413 19 PLAY * EJECT SLOW 21 PLAY 24 TV/VCR DISPLAY 22 REW FF 19 FF * EN
ملخص المحتوى في الصفحة رقم 9
INTRODUCTION VCR Display Cassette indicator Timer recording indicator TIMER TIMER VCR VCR VCR indicator Multifunctional indicator Rear Panel RF IN (FROM ANT.) terminal LINE OUT AUDIO jack LINE IN AUDIO jack IN (FROM ANT.) AUDIO OUT IN RF OUT (TO TV) CH 34 VIDEO LINE IN VIDEO jack LINE OUT VIDEO jack To wall outlet CH selector (3/4) RF OUT (TO TV) terminal W-412 (ENG)* 9 1/17/01, 9:50 AM
ملخص المحتوى في الصفحة رقم 10
PREPARATION How to Use the Remote Control This section explains how to get ready for remote control operation. Setting up the Remote Control Open the battery compartment lid on the 1 rear panel. Install 2 batteries (“AA” size) following 2 the polarity diagrams. Close the battery compartment lid. 3 Point the remote control at the VCR and press the buttons within the operating range. 4 Distance: within about 7 m from the front of the remote sensor Angles: within about 30˚ in every direction Notes
ملخص المحتوى في الصفحة رقم 11
PREPARATION PREPARATION Connections Before you use this VCR, it is necessary to connect it to your TV. Several ways of connecting are available depending on your use of TV or cable box. Select one which is applicable to your equipment. Antenna/VCR/TV Connection Disconnect the antenna cable from your TV and connect it to the RF IN terminal on the 1 VCR. Connect the RF OUT terminal to the TV. 2 VHF/UHF UHF antenna VHF antenna combination antenna only only IN (FROM ANT.) IN (FROM ANT.) 1 AUDIO OU
ملخص المحتوى في الصفحة رقم 12
Connections (continued) This set-up will enable you to: – record an unscrambled channel. – watch an unscrambled channel while recording it. IN (FROM ANT.) AUDIO OUT IN – record an unscrambled channel while watching OUT RF (TO TV) CH 34 VIDEO another (scrambled or unscrambled). Cable box You will need to: • set TV channel to the output channel of the cable Incoming cable IN OUT box. • turn on the cable box and select cable channel 3 or 4 according to the output channel of the VCR. • to record a c
ملخص المحتوى في الصفحة رقم 13
PREPARATION PREPARATION Auto Set Up The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet. Auto Set up VCR TV POWER Plug the VCR into the AC outlet 1 1 2 3 4 5 6 “Auto” blink while the VCR automatically sets the clock using 2 7 8 9 0 100 the data broadcast by the local TV stations. VC-413 While “Auto” is blinking, channel memory is also set EJECT PLAY automatically. REW FF ENTER STOP SLOW PAUSE/STILL REMAIN/ COUNT DISPLAY COUNTER RESET SP/ SLP I.SELE
ملخص المحتوى في الصفحة رقم 14
PREPARATION Initial Settings Using On-screen Display The language selection and clock setting must be set first when VCR is first plugged in or after it encounters a power failure. Preparation • Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 11). • Press VCR to set the remote control operating the VCR. Setting the Language VCR VCR TV POWER POWER Press POWER to turn on the VCR. 1 1 2 3 4 5 6 7 8 9 Press PROG.. 2 0 100 T
ملخص المحتوى في الصفحة رقم 15
PREPARATION Setting the Clock Press ENTER to start the “AUTO” clock 8 set feature. Example: To set the clock to 2:30 p.m. on After the VCR is turned off, it automatically August 25 (summer time) 2001. updates the clock using the data broadcast by the local TV stations. Press PROG.. 1 *The clock is The MENU screen appears on the TV. revised by CLOCK SET Select “PRESET” using FF or REW, broadcasting 2 SUMMER TIME and press ENTER. signal at 8:00 A.M TIME ZOnE CH 2 every morning. SCAnnInG
ملخص المحتوى في الصفحة رقم 16
PREPARATION Storing Channels on the VCR This section is required if you receive only normal TV or unscrambled cable channels. Incoming Antenna/Cable(CATV) Signals The VCR scans through all receivable TV and CATV channels and stores only the active ones in your area into the memory. Once the storing is finished, you can select a desired channel using CH/TRK. Preparation • Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video connection (page 1
ملخص المحتوى في الصفحة رقم 17
PREPARATION 3) Enter a channel number of 1 to 125 using Adding or erasing channels number buttons. Adding channels For more than 100 number, first press 100. If a desired channel cannot be scanned For CATV channels, refer to the chart below. automatically because of a weak signal, it can be (For other orders, check with your cable added to the memory. company.) Erasing channels 4) Repeat steps 2) and 3) to add or erase You can erase a stored channel from the memory channels as necessary. if it i
ملخص المحتوى في الصفحة رقم 18
PREPARATION Video Cassette Use Video Cassette Use Loading a cassette Push the cassette into the cassette compartment with the window side facing up and the label side towards the front. The VCR is automatically turned on. The indicator will appear in the VCR display. Ejecting a cassette Press EJECT. The cassette is ejected from the cassette compartment. Warning Do not insert your hands or any foreign objects into the compartment. This may result in injury or damage. Take special
ملخص المحتوى في الصفحة رقم 19
PLAYBACK PLAYBACK Playback This section explains the basic playback operation. Preparation • Select the video channel (3 or 4) or video input mode on the TV. • Press VCR to set the remote control operating the VCR. Basic Playback VCR TV POWER Load a recorded cassette. 1 TIMER 1 2 3 Power is turned on. SLP S CH/TRK 4 5 6 If the cassette has no safety tab, REC L VCR 7 8 9 playback starts automatically. 0 100 VC-413 Press PLAY to start playback. EJECT 2 2 PLA PLAY Y ST FF REW REW FF FF ENTER L VCR
ملخص المحتوى في الصفحة رقم 20
PLAYBACK Variable Speed Playback You can play back a tape at various tape speeds. Picture Search A tape runs at 5 times or 7 times the normal playback speed so VCR TV POWER that you can quickly locate a particular scene. 1 2 3 4 6 5 Press FF or REW during playback. 7 8 9 1 100 0 The tape runs at 5 times the normal playback speed. VC-413 PLAY EJECT PLA PLAY Y To change the tape speed to 7 times the normal playback 2 FF REW REW FF FF ENTER speed, press and hold FF or REW. REW STOP PAUSE/STILL If y
