ملخص المحتوى في الصفحة رقم 1
OWNER’S
VIDEO CASSETTE
MANUAL
If you need additional
RECORDER
operating assistance after
reading this owner's manual
or to order replacement
accessories, please call
SL260C
TOLL FREE : 1-800-242-7158.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
WARNING:
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within
CAUTION
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
RISK OF ELECTRIC SHO
ملخص المحتوى في الصفحة رقم 2
PRECAUTIONS DESCRIPTION OF CONTROLS DESCRIPTION OF CONTROLS PRECAUTIONS INSTALL LOCATION Front Panel 142536 For safety and optimum performance of your VCR: REW PAUSE/STILL F.FWD • Install the VCR in a horizontal and stable position. PLAY Do not place anything directly on top of the VCR. STOP/EJECT Do not place the VCR directly on top of the TV. REC/ POWER VCR/TV POWER VCR/TV TAPE IN TIMER REC TAPE SPEED CHANNEL MENU OTR VIDEO L AUDIO R • Shield it from direct sunlight and keep it away from sou
ملخص المحتوى في الصفحة رقم 3
IN OUT PREPARATION FOR USE 1 Check contents VCR to AV TV connection using AUDIO/VIDEO Cables Make sure the package contains all of the accessories Using Optional AUDIO/ VIDEO Output Jacks listed in "as below". With this connection, you can get better pictures and SUPPLIED ACCESSORIES sounds when playing back a tape if your TV has A/V Input jacks. Please refer to your TV’s owner’s manual. ACCESSORIES PART NO. Using AUDIO/VIDEO Input Jacks You can use the A/V input jacks on the front or the back C
ملخص المحتوى في الصفحة رقم 4
PLAYBACK SETUP FUNCTION TO PRESET THE CHANNEL AGAIN PLAYBACK FUNCTION 1 Press [MENU] until the main menu appears. NORMAL PLAYBACK 2 Select "CHANNEL SET UP" by pressing [PLAY] or [STOP]. Then, press [F.FWD]. Insert the prerecorded tape. The 1 3 Select "AUTO SET UP" by pressing [PLAY] or VCR will turn on. If the safety tab has [STOP]. Then, press [F.FWD]. After scanning, the tuner been removed, the VCR will start stops on the lowest memorized channel. playback automatically. TO ADD/DELETE CHANNELS
ملخص المحتوى في الصفحة رقم 5
INDEX SEARCH TIME SEARCH The index signal is recorded on the tape automatically This feature allows you to fast forward or rewind the when the recording is started. If you want to view a tape for a desired length of time. recording at a specific start point, it can easily be done. 1 Press [SEARCH MODE] so that the Time Search 1 Press [SEARCH MODE] so that the Index Search menu appears. menu appears. 2 Enter your desired time to skip INDEX SEARCH TIME SEARCH 2 Enter your desired number by by pre
ملخص المحتوى في الصفحة رقم 6
RECORDING SPECIAL FUNCTION FEATURES • Go to the digit you want to change by pressing [F.FWD] HINTS FOR TIMER RECORDING or [REW]. Then, enter correct numbers by pressing • If there is a power failure or the VCR is unplugged for [PLAY] or [STOP]. more than 30 seconds, the clock setting and all timer • You may cancel the entire program by pressing [REW] settings will be lost. during the program number flashes. • If the tape runs out before the end time, the VCR will 5 Press [EXIT/RESET] to exit. sw
ملخص المحتوى في الصفحة رقم 7
AUTO REWIND REAL TIME TAPE COUNTER • This shows the elapsed recording or playback time in When a tape has reached the end during recording, hours, minutes, and seconds. (The displayed time will playback, or fast-forward, the tape will automatically not change during blank portions on the tape.) rewind to the beginning. After rewinding finishes, the • The indication will appear when the tape is rewound VCR will eject the tape and turn itself to off. further than “0:00:00” on the tape counter. • T
ملخص المحتوى في الصفحة رقم 8
WARRANTY INSTRUCCIONES EN ESPAÑOL CONTROLES DE FUNCIONAMIENTO Y FUNCIONES Panel frontal Indicadores Mando a distancia 1. Compartimiento del videocasete 17. Indicador de alimentación 1. Botón de la alimentación (POWER) 2. Botón de parada/expulsión 18. Indicador de videograbadora/televisor 2. Botones de número (NUMBER) 19. Indicador de videocasete introducido 3. Botón de menús (MENU) 3. Botón de reproducción 4. Botón de rebobinado 20. Indicador del temporizador 4. Botón de visualizador (DISPLAY) 5
