ملخص المحتوى في الصفحة رقم 1
Video Cassette Recorder
VRA411AT
Owner’s Manual
Important!
Return your Warranty Registration
Card within 10 days. See why inside.
ملخص المحتوى في الصفحة رقم 2
N I H T I W D E D E E N N O I Return your Warranty Registration card today to ensure you receive all the you’re entitled to. benefits Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. Warranty Owner Model Verification Confirmation Registration Registering your product within
ملخص المحتوى في الصفحة رقم 3
Introduction 3 Welcome to your VCR owner’s manual. This manual has six sections: Setting Up Your VCR; Description of Controls; Basic Operations; Recording; Playing; and Information You May Need. The instructions explain all of the VCR’s features, which are listed below. You cannot hurt your VCR by trying the features! So read on – and relax. Features • Automatic Channel Setup • Automatic Head Cleaner • Automatic Operation Features • Automatic Tracking Adjustment • Blue Background • Daylight-Sav
ملخص المحتوى في الصفحة رقم 4
4 Table of Contents Setting Up Your VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Before Using Your VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Hookups Without a Cable Box/Direct Broadcast System . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 5
Before Using Your VCR 5 Removing the Plastic Cover from the Front Panel A thin, plastic cover may protect the front panel of your VCR. Before using the VCR, lift a corner of the plastic, then peel it off. 1 Putting Batteries in the Remote Control 1 Remove the battery compartment lid on the bottom of the remote control by sliding it in the direction of the arrow. 2 2 Place two AA batteries inside the battery compartment with their and ends aligned as indicated. + – 3 Replace the battery compartm
ملخص المحتوى في الصفحة رقم 6
75V ANT / CABLE 6 Hookups Without a Cable Box/Direct Broadcast System The basic VCR/TV connection – antenna/cable to VCR to TV – is shown below. If you have a Cable Box or a Direct Broadcast System, please see pages eight-nine. If you have a Stereo TV, please see page 10. After you hook up the VCR, go to page 11 to turn on the VCR. 1 Disconnect the antenna or cable from your TV. Antenna Indoor/Outdoor (300 ohm) 75V ANT / CABLE OR ANTENNA IN Jack (on back of TV) Cable (75 ohm) 2 Connect the ante
ملخص المحتوى في الصفحة رقم 7
75V ANT / CABLE Hookups Without a Cable Box/Direct Broadcast System (cont’d) 7 3 Connect the RF coaxial cable (supplied) to the OUT Jack on the back of the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.) ANT IN AUDIO IN Antenna OUT OUT CH3 CH4 VIDEO ANT or Cable IN 75V ANT / CABLE AUDIO OUT IN OUT ANTENNA IN Jack (on back of TV) CH3 CH4 VIDEO example only RF coaxial cable 4 Plug in the TV and the V
ملخص المحتوى في الصفحة رقم 8
75V ANT / CABLE 8 Hookups With a Cable Box/Direct Broadcast System There are two ways to connect your Cable Box/DBS to the VCR. With this connection: l You may view any channel. l You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR. l You may not view a channel other than the one you are recording. l You may not program channels at the VCR. l You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS output chan
ملخص المحتوى في الصفحة رقم 9
75V ANT / CABLE OUT IN Hookups With a Cable Box/Direct Broadcast System (cont’d) 9 With this connection: l You may watch one channel while recording another. l You may not record scrambled channels. VCR 1 Cable Box/DBS 2 ANT IN AUDIO IN OUT OUT CH3 CH4 VIDEO RF coaxial Cable cable Signal TV’s ANTENNA RF coaxial IN Jack 3 cable Connections 1 Connect a Cable signal to the VCR’s ANT(enna) IN Jack. 2 Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable B
ملخص المحتوى في الصفحة رقم 10
10 Hookups With a Stereo TV antenna or cable to 1 ANT(enna) IN Jack ANT IN AUDIO IN OUT OUT CH3 CH4 VIDEO Audio and Video IN Jacks on TV VIDEO (yellow) and AUDIO (white) OUT Jacks Video Cable 2 Audio Cable 3 l Audio and Video cables are not supplied. 1 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR. 2 Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV. 3 Connect a
ملخص المحتوى في الصفحة رقم 11
MENU Turning on Your VCR 11 Before turning on your VCR, make sure batteries are in the Turn on the TV. remote control and the VCR and TV are connected correctly. 2 l You can not program channels if you are using a Cable Box or a Direct Broadcast System. POWER VCR/TV EJECT 1 TV Press the VCR button, then press the POWER button. 1 The VCR light and the PWR. (power) light will appear on the dis- play panel. PLAY REW F.FWD STOP 3 STATUS/EXIT 2 Turn on the TV. Set it to the same channel as the 4 1
ملخص المحتوى في الصفحة رقم 12
MENU 12 Automatic Channel Setup Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you set up the channels again. 3-4 1 Press the VCR button. POWER VCR/TV EJECT 2 Press the MENU button. TV SELECT op CHOOSE B 1 PLAY fi PROGRAM REW F.FWD VCR SET UP STOP TUNER SET UP SET CLOCK STATUS/EXIT TO END PUSH EXIT 2 1 2 3 CH 4 5 6 3 7 8 9 Press the PLAY/o button or the STOP/p button to select ALT. CH VOL 0 TUNER SET UP, then press
ملخص المحتوى في الصفحة رقم 13
MENU Automatic Channel Setup (cont’d) 13 Adding/Deleting Channels 3-6 1 Press the VCR button. POWER VCR/TV EJECT 1 TV 2 Press the MENU button. PLAY REW F.FWD STOP 3 STATUS/EXIT Press the PLAY/o button or the STOP/p button to select TUNER SET UP, then press the F.FWD/B button. 2 1 2 3 CH 4 5 6 4 7 8 9 7 Press the PLAY/o button or the STOP/p button to select ALT. CH VOL 0 ADD/DELETE CH, then press the F.FWD/B button. SPEED TIME SEARCH PAUSE/STILL SELECT op ADD/DELETE B REC/OTR MEMORY SLOW MUTE 12
ملخص المحتوى في الصفحة رقم 14
MENU 14 Automatic Channel Setup (cont’d) Reviewing Memorized Channels 3-4 1 Press the VCR button. 2 POWER VCR/TV EJECT Press the MENU button. TV SELECT op CHOOSE B 1 fi PROGRAM PLAY VCR SET UP REW F.FWD TUNER SET UP STOP SET CLOCK STATUS/EXIT TO END PUSH EXIT 2 1 2 3 5 CH 4 5 6 3 Press the PLAY/o button or the STOP/p button to select 7 8 9 ALT. CH TUNER SET UP, then press the F.FWD/B button. VOL 0 SPEED TIME SEARCH PAUSE/STILL SELECT op CHOOSE B fi AUTO PROGRAMMING REC/OTR MEMORY SLOW MUTE ADD/DE
ملخص المحتوى في الصفحة رقم 15
MENU Setting the Clock 15 Follow the steps below to set your VCR’s clock. Make sure: l The VCR is on and the VCR light appears on the display panel. (If it does not, press the VCR/TV button once.) l You make each entry within 60 seconds of the previous entry. 3-4 1 Press the VCR button. POWER VCR/TV EJECT TV 2 1 Press the MENU button. PLAY REW F.FWD STOP 3 STATUS/EXIT Press the PLAY/o button or the STOP/p button to select 2 SET CLOCK, then press the F.FWD/B button. 1 2 3 7 CH 4 5 6 7 8 9 4 ALT
ملخص المحتوى في الصفحة رقم 16
MENU 16 Daylight-Savings Time You may program the VCR so its clock will automatically move forward one hour in April and turn back one hour in October. Daylight-Savings Time is set to ON when you receive your VCR. Turn Daylight-Savings Time ON or OFF by following the steps 3-4 below. Before you begin: l Make sure the clock is set. POWER VCR/TV EJECT TV 1 Press the VCR button. 1 PLAY REW F.FWD STOP 2 STATUS/EXIT Press the MENU button. 2 SELECT op CHOOSE B 1 2 3 5 CH fi PROGRAM 4 5 6 VCR SET UP TU
ملخص المحتوى في الصفحة رقم 17
MENU Language Selection 17 Follow the steps below to change the language of the on-screen displays and menus. 3-5 1 Press the VCR button. POWER VCR/TV EJECT 1 TV 2 Press the MENU button. PLAY REW F.FWD SELECT op CHOOSE B STOP fi PROGRAM STATUS/EXIT VCR SET UP TUNER SET UP SET CLOCK 2 1 2 3 6 TO END PUSH EXIT CH 4 5 6 7 8 9 ALT. CH 3 VOL 0 SPEED TIME SEARCH PAUSE/STILL Press the PLAY/o button or the STOP/p button to select VCR SET UP, then press the F.FWD/B button. REC/OTR MEMORY SLOW MUTE SELECT
ملخص المحتوى في الصفحة رقم 18
MENU 18 Remote Control Buttons EJECT Button Press to eject the tape. POWER Button Press to turn on or off the VCR or a Magnavox, Philips, or Philips Magnavox TV. (You must first press the VCR or TV button.) VCR Button POWER VCR/TV EJECT Press to operate the VCR. PLAY/o Button TV Press to play a tape; press to release Slow, Search, or Still mode and return to normal playback. Details are on page 36. Press to select an item in the on- PLAY screen menu. Or, if you have a Magnavox, Philips, or Ph
ملخص المحتوى في الصفحة رقم 19
MENU Remote Control Buttons (cont’d) 19 VCR/TV Button Use to select the signal that your TV receives. VCR Position l Use to watch a tape, to watch a program while recording it, or to watch a TV broadcast using the CH(annel) o/p or Number buttons to change channels at the VCR. If the VCR light appears on the display panel of the VCR, it is in VCR position. POWER VCR/TV EJECT TV Position l TV Use to watch TV (changing channels at the TV) or to watch one pro- gram while recording another. Detail
ملخص المحتوى في الصفحة رقم 20
20 On-Screen Status Displays A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status display will vary. To choose the status display mode, follow the steps below. If you select STATUS ON, then select COUNTER ONLY ON: Status Display l Whenever you press the STOP/p button or the PLAY/o button, (example only) the status display will appear for five seconds. After five seconds, Current status only the counter will remain on the scre
