JL Audio Stealthbox SB-T-TACDC/10W1v2 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

SB-T-TACDC/10W1v2_INSTR_SKU#011238
Installat Ion

d I F F I C u l t Y :

If you choose to perform the installation yourself, it is absolutely vital that
®
out
the Stealthbox be properly mounted to the vehicle according to these
o F
instructions. Failure to mount the enclosure properly presents two problems:
I n s t a l l a t I o n G u I d e
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
35
caused by the force exerted by the woofer(s).
SB-T-TACD

ملخص المحتوى في الصفحة رقم 2

SB-T-TACDC/10W1v2_INSTR_SKU#011238 S T E P 8 s t e P 4 Thread the supplied socket cup screw into the rear of the The top cut line runs straight across. The line does not follow Stealthbox®, leaving 1/4-inch of the threads exposed. the corner crease, as like the other cut lines. This top line is 1/2-inch in front of the corner crease. Place the Stealthbox® with the modified plastic panel into the mounting location and press firmly onto the Stealthbox®. Remove the Stealthbox® with the plas

ملخص المحتوى في الصفحة رقم 3

SB-T-TACDC/10W1v2_INSTR_SKU#011238 I n C l u d e d H a R d W a R e (1) 3/8-inch Split Lock Washer (1) 3/8-inch -16 x 2-1/4-inch Socket Cup Set Screw (1) 3/8-inch Flat Washer (1) 3/8-inch -16 Hex Nut (1) 3/8-inch x 2-inch Fender Washer (1) 3-inch x 3-inch Wax Square s P e C I F I C a t I o n s s t e P 1 2 Secure the driver’s side plastic panel back onto the rear wall. Enclosure Type: Acoustic Suspension (sealed) Driver Type: 2) 10W1v2-8 Nominal Impedance: 4 ohms m