ملخص المحتوى في الصفحة رقم 1
SEBO essentialG-Series
For Household Use Only
© Copyright SEBO America, LLC • All rights reserved.
ENGLISH
ملخص المحتوى في الصفحة رقم 2
SEBO automatic G Series Owner’s Manual Table of Contents Technical Details 2 Wiring Diagram 2 Important Safety Instructions 3 Special SEBO Product Features 4 S-Class Filtration 4 Brush Roller Obstruction – Auto Shut-Off 4 Brush Roller Deterioration Warning 4 Stationary Use Warning 4 Bag Full or Clog Warning – Auto Shut-Off 4 Identification of Parts 5 Assembly 5 Optional Attachments 5 Standard Attachments 5 Operating Instructions 6 Starting the Machine 6 Operating Positions 6 Using the Attachment
ملخص المحتوى في الصفحة رقم 3
! IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE When using an electrical appliance, basic precautions must always be followed. To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the p
ملخص المحتوى في الصفحة رقم 4
SPECIAL SEBO PRODUCT FEATURES Your SEBO essential G series vacuum cleaner is the most technically advanced upright vacuum cleaner in the world. Along with its excellent filtration system (99.9% to 0.3 microns), the machine has warning systems and automatic shut-off capabilities that are designed to alert the user to machine problems that, if ignored, will damage the machine or diminish performance. Some of your SEBO essential’s most unique features are: 1. S-Class Filtration. Certified by leadin
ملخص المحتوى في الصفحة رقم 5
Identification of Parts 1. Handle grip 14. Cable (cord) hook 2. On/Off switch 15. Attachment tube (active wand) 3. Handle assembly 16. Crevice nozzle 4. Retaining ring 17. Upholstery nozzle 5. Cover release flap 18. Pile adjustment knob 6. Dust bag housing 19. Foot pedal 7. Front cover 20. Swivel neck 8. Housing release button 21. Support lever 9. Power head with brush 22. Handle release catch 10. Cable (cord) 23. Projection tab 11. Attachment tube handle 24. Connecting tube 12. Attachment hose
ملخص المحتوى في الصفحة رقم 6
Operating Instructions Starting The Machine - Figures 1 & 2 A. Before turning on your vacuum cleaner, make sure that the vacuum handle is in its upright locked position and that you have a firm hold on the handle grip to keep the machine from moving forward. 14 1. Turn the quick release cable hook (14) to the up position by moving it to the left or right (figure 1). 2. Release the power cord plug from the power cord and lift the cord off of the upper cord hook (27 - figure 2). 3. With the switch
ملخص المحتوى في الصفحة رقم 7
Using the Attachment Tube, 1 Hose & Attachments - Figures 4, 5 & 6 11 12 The attachment tube (15) is useful for vacuuming corners and hard-to-reach areas.The handle grip (1) should be in the upright, locked position (as shown in figure 1). Grip the attachment tube handle (11), pull it up and away from 15 the machine and stretch out the hose (12) until it locks to the back of the tube (this locking action will prevent the hose from retracting back into the attach- 6 ment tube while it is in use).
ملخص المحتوى في الصفحة رقم 8
Maintenance Always unplug vacuum from outlet ! before dismantling any part of the machine! Changing the Dust Bag - Figure 9 7 To change the dust bag, pull the cover release flap forward (#5 on page 5) and lift the cover (7) from the dust bag 29 housing. The cover release flap must remain in a for- 30 ward “pulled-out” position to change dust bags and lock them into place. Squeeze the clamps on both sides Dust Bag of the dust bag sealing plate (29), slide the plate from the Part #5093 AM holder (
ملخص المحتوى في الصفحة رقم 9
Clog Removal Always unplug vacuum from outlet before removing ! any clogs! Clogs in the Airflow Pathway - Figure 13 Most clogs can be removed by accessing the airflow pathway via the orange 39 colored access door (39) located on the underside of the power head. Figure 13 However, other clogs may only be removed by accessing the airflow pathway by disassembling the machine in the opposite sequence of the machine’s original assembly (see assembly, page 5). 12 Clogs in the Attachment Hose - Figure
ملخص المحتوى في الصفحة رقم 10
Trouble-Shooting Guide Always unplug vacuum from outlet before dismantling any part of the machine! ! PROBLEM REASON SOLUTION Does not turn on 1. Handle not fully inserted into the bag 1. Release handle catch, push handle or machine shuts off housing, causing a faulty connection. down, close handle catch. intermittently 2. Not plugged into good outlet. 2. Use another outlet. 3. Cable worn. 3. Replace cable. 4. Dust bag housing (6) not seated 4. Housing release button (8) should fully into proper
ملخص المحتوى في الصفحة رقم 11
Bag Housing with Handle SEBO ESSENTIAL G1 / G2 #9591AT G1 and #9592AT G2 Teal/Light Gray Machines #9592AT G2 - Teal/Light Gray #9591AT G1 - Teal/Light Gray Pos. Part # Description #9592AM G2 - Light Gray/Dark Gray #9591AM G1 - Light Gray/Dark Gray 1 5624 AT Handle with cable,teal, complete 2 5296 ES Handle grip (incl. pos. 3, 7 & 10) 3 5359 HG Grommet 4 5450 DG Power supply cord 5 05113 Switch 6 5160 TK Switch cap - teal 7 5161 HG Switch cap holder - light gray 8 5162 Cable clamp 9 0103 Screw C
ملخص المحتوى في الصفحة رقم 12
SEBO ESSENTIAL G1 Power Head 9591AT G1 Teal/Light Gray Machine #9591AT G1 - Teal/Light Gray Pos. Part # Description #9591AM G1 - Light Gray/Dark Gray 100 2831AT Power head cover, complete - teal 101 2846 Exhaust filter 102 2820TK Exhaust filter cover - teal 103 2823UL Swivel neck assembly 104 2883 Male contact holder 105 2494 Cable clamp 106 0102 Screw F 3.9 x 13 107 2835 Bypass valve 108 0869 Internal cable 109 2825 Swivel neck bearing r.h. 110 2824 Swivel neck support r.h. 111 5479 Swivel neck
ملخص المحتوى في الصفحة رقم 13
Power Head SEBO ESSENTIAL G2 #9592AT G2 - Teal/Light Gray #9592AT G2 Teal/Light Gray Machine #9592AM G2 - Light Gray/Dark Gray Pos. Part # Description 100 2832AT Power head cover, complete - teal 101 2846 Exhaust filter 102 2820TK Exhaust filter cover - teal 103 2823UL Swivel neck assembly 104 2883 Male contact holder 105 2494 Cable clamp 106 0102 Screw F 3.9 x 13 107 2835 Bypass valve 108 0869 Internal cable 109 2825 Swivel neck bearing r.h. 110 2824 Swivel neck support r.h. 111 5479 Swivel nec
ملخص المحتوى في الصفحة رقم 14
SEBO VACUUM CLEANER WARRANTY Five Years Non-Wear Parts - Five Years Motor - One Year Labor 1. Your authorized SEBO dealer or SEBO will provide the filters, the cable (external cord), the attachment hose, original product purchaser with replacement of Non- the brush rollers, the front bottom plate, the rear Wear Parts which fail due to a material or workman- bottom plate, the telescopic tube, the crevice nozzle, ship defect for a period of five (5) years from the orig- the upholstery nozzle, the
