ملخص المحتوى في الصفحة رقم 1
Assembling the cleaner
Product accessories
c arton contents
Empty carton. Find the parts shown above before disposing of packing materials.
Vacuum Cleaner
user manual
English
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/global/register
1_
ملخص المحتوى في الصفحة رقم 2
Safety information saFetY iNForMatioN • Befor e operating the appliance, please read this manual thoroughly and retain it WARNING for your reference. • Because the following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described WARNING in this manual. cautioN/W arNiNG sYMBoLs used Indicates that a danger of death or serious injury exists. WARNING Indicates that a risk of personal injury or material damage exists. CA
ملخص المحتوى في الصفحة رقم 3
Safety information iMPortaNt saFetY iNstructioNs Thank you for purchasing a Samsung vacuum cleaner. When using an electrical appliance, basic precautions should always be followed, including the following : PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING : To reduce the risk of fire, electric shock, or injury. • Do not leave vacuum cleaner unattended when it is plugged in. • Unplug from outlet when not in use and before servicing. • Do not use outdoors
ملخص المحتوى في الصفحة رقم 4
Contents 05. introduction AssemblING The CleANeR 06. Product accessories 07. assembling the cleaner 05 08. t ool storage 09. cord release OpeRATING The CleANeR 09. Power foot height adjustment 10. Power switch/Power foot brush roll switch 09 10. circuit break (reset switch) 11. How to operate hOW TO OpeRATe 12. using accessories 13. Longreach cleaning 11 14. check rotating floor brush and drive belt mAINTAIN TOOls ANd fIl TeR 14. replace drive belt 15. smart inverter 14 16. Powered hand too
ملخص المحتوى في الصفحة رقم 5
01 ASSEMblING THE ClEANER Assembling the cleaner iNtroductioN Handle Cord clip Hose Carrying handle (Dust bin handle) Extension Dusting pipe wand brush holder Hanger cord Dust bin Hose guide Crevice Smart tool holder inverter Height adjustment knob Power foot Handle (Brush roll) release Furniture guard FRONT bACK Do not plug in your vacuum cleaner until you are familiar with all instructions CAUTION and operating procedures. Plastic film can be dangerous. To avoid danger of suffocation
ملخص المحتوى في الصفحة رقم 6
Assembling the cleaner Product accessories carton contents Ⓐ Ⓑ Ⓒ Ⓓ Empty carton. Find the parts shown above before disposing of packing materials. A. Vacuum cleaner body B. Handle C. Hose D. Extension Pipe wand accessories 1 slide fully retracted extension wand into the handle until you hear a click. slide fully retracted wand and handle into the slot on body until you hear a click. 2 Makes sure slot guides and inserts. Ⓔ Ⓕ Ⓖ 3 slide fully retracted hose into the handle until yo
ملخص المحتوى في الصفحة رقم 7
ملخص المحتوى في الصفحة رقم 8
Assembling the cleaner tooL storaGe Attach tools. Clip turbo tool into the caddy on the front of the handle. Attach dusting tool into the dusting tool holder on side of the body. Attach crevice tool into the crevice tool holder on side of the body. Mini turbo brush (t urbine brush) • use for upholstered furniture, carpeted stairs and hard to reach places. dusting brush/upholstery brush • use for carved furniture, table tops, books, lamps, lighting fixtures, venetian blinds, base boards,
ملخص المحتوى في الصفحة رقم 9
02 OpERATING THE ClEANER Operating the cleaner cord reLease Turn cord release 180 degrees for easy cord removal. Store cord wraps to keep out of the way while vacuuming. Cord release Up PoWer Foot HeiGHt adjustMeNt The power foot on your SAMSUNG vacuum cleaner can be adjusted to clean several floor surfaces. For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting. 1. Place handle in u
ملخص المحتوى في الصفحة رقم 10
Operating the cleaner Power switch/Power foot brush roll switch Dust bin release Power ON/OFF Pipe release Power control Brush roll on/off The Power on/off button is located on the top body. Turn on vacuum by power button after plugging cord into electrical outlet. The vacuum is automatically controled by the dirt senser. The dirt sensor is automatic power control by dust amount. There are 3 suction power levels by power control button. The Power foot brush on/off button turns the rotating brush
ملخص المحتوى في الصفحة رقم 11
03 HOW TO OpERATE How to operate Plug cord into electrical outlet. Press power on/off button. Push cleaner handle release down with foot and pull handle towards you. Handle release pedal is located on the lower left side you look at the back of the vacuum cleaner. Handle Positions Select the desired angle of the cleaner using the handle release pedal. The handle of your cleaner has three positions. Raise or lower the handle and release the pedal. A. Upright A For storage and elevated cl
ملخص المحتوى في الصفحة رقم 12
How to operate LoNGreacH cLeaNiNG usiNG accessories Put the cleaner in the upright position to stop the brush-roll rotating, or simply press the brush-roll on/off button. Push down and pull out the handle, while pressing the pipe release button. Remove the hose and handle from the slot. The air flow is automatically inverted by the smart inverter. Choose any of the handy accessories or use the hose alone. Simply push the attachment firmly into the end of the extension wand. To remove tool, twis
ملخص المحتوى في الصفحة رقم 13
03 HOW TO OpERATE LoNGreacH cLeaNiNG The stretch hose is extended for long reach and upstairs. Do not put the your Vacuum cleaner above you on the stairs when cleaning the stairs. Ensure it is positioned against up the bottom stairs. How to operate _ 13
ملخص المحتوى في الصفحة رقم 14
Maintain tools and filter check rotating Floor Brush and drive Belt You should check your vacuum cleaner’s rotating floor brush and drive belt regularly for wear or damage. You should also clean the brush and brush ends of strings, hair, and carpet fibers. These can wrap around the brush and hamper its ability to effectively clean your carpet. Also remove any debris that has accumulated under the brush cover. 1. Unplug cleaner from electrical outlet. 2. Recline handle and tur n vacuum c
ملخص المحتوى في الصفحة رقم 15
04 MAINTAIN TOOlS ANd FIlTER smart inverter 1. Unplug cleaner from electrical outlet. 2. Remove 3 screws at back of the vacuum cleaner show with a screwdriver. 3. Clean up the smart inverter inside. 4. Refit hose inverter (Check the position carefully) 5. Refit smart inverter and 3 screws.(When refit the smart inverter while slide inverter pushing down) 6. Slide fully connected hose with the inverter(Check the position carefully) 7. Pull the brush hose on the back of brush and slide full
ملخص المحتوى في الصفحة رقم 16
Maintain tools and filter carton contents brushbar Replacement 1. Remove the tool from the pipe, and turn upside down. Slide the switch to unlock position and remove bottom plate. 2. Remove brushbar and discard. 3. Inspect belt to ensure that it is in good condition. If broken or cracked, please replace. (See below for details.) 4. With the curved ends facing down, slide end plates of brushbar into slots on the tool. 5. T o replace bottom plate, insert the four tabs on edge of botto
ملخص المحتوى في الصفحة رقم 17
04 MAINTAIN TOOlS ANd FIlTER eMPtYiNG tHe dust BiN To remove dust bin from vacuum cleaner, push the dust bin release button. Hold dust bin and push down bin release empty button to empty. Turn grille cyclone for easy dust removal. Ensure bin is empty and close dust bin base. When emptying any vacuum cleaner it is difficult to avoid exposure to dust. To minimize this risk, please ensure that you encase the dust pot in a large bag to empty it and close the bag as tightly as possible round the pot
ملخص المحتوى في الصفحة رقم 18
Maintain tools and filter cleaning the dust bin & re-assembling the dust bin Push down cyclone release button. Turn grille cyclone for clean. Cleaning the clean bin. Rinse with cold water only. Ensure dust bin and grille is completely dry before refitting Fit cyclone assembly inside the bin Line up the front and rear guides and push down secure. Push down bin release empty button and refit the grille cyclone Close dust bin base. 1 2 3 4 5 6 7 8 Check the assembling dust bin base and body grille
ملخص المحتوى في الصفحة رقم 19
04 MAINTAIN TOOlS ANd FIlTER T T h h I I I e e n n n H H E E s s s P P A A e e e f f i i l l r r r t t e e t t t r r s s h h T T T o o u u l l h h h d d i i i b b e e s s s r r e e WasHiNG Your FiLter For safety, Turn power off and unplug before checking for blockages. Remove dust bin from Vacuum cleaner. Unlock the cover filter. Lift filter release catch and remove filter. Separate sponge filter and case filter. Wash filter and case in cold water only. Repeat until water runs clear. Dry for at
ملخص المحتوى في الصفحة رقم 20
Trouble shooting Check this list of possible problems and solutions before bring your vacuum to a service center problem possible solution Vacuum cleaner won’t turn on • Not properly plugged into electrical outlet. • Plug unit in firmly • Vacuum cleaner not turned on. • Press on/off button • No electricity in the electrical outlet. • Check fuse or breaker Vacuum cleaner won’t pick up / loss of suction • Circuit breaker tripped • Reset circuit breaker • Agitator brush rolls worn • Replace brush
