ملخص المحتوى في الصفحة رقم 1
REMOTE CONTROL MODEL MBR3430
Your multi-brand remote has already been programmed to
The multi-brand remote supplied with your new Zenith TV
operate your Zenith TV, a Zenith VCR and a Zenith cable-TV
allows you to operate most models of infrared (IR)
decoder. It must be “taught” to operate other brands. Refer
remote-controlled TVs, VCRs and cable-TV converters, even
to “Auto Find Mode” and “Programming Your Remote
if they are all different brands.
Control” for details.
CHOOSE THE OPERATING MODE
S
ملخص المحتوى في الصفحة رقم 2
REMOTE CONTROL MODEL MBR3430 TV OPERATIONS The following functions and operations apply to your Zenith TV. The remote control must be in the TV mode to operate MODE Used to select the TV mode of Point toward your OFF/ON operation. Used to turn TV ON or OFF. TV \ SOURCE Lights when TV mode of Used to display the menu of TV sources for some TVs. Press again CC (Closed Captions) to step through the source Used to view closed captions selections. On some TVs, press to broadcast with some television
ملخص المحتوى في الصفحة رقم 3
REMOTE CONTROL MODEL MBR3430 VCR OPERATIONS The remote control supplied with your VCR may have keys The following functions and operations apply to Zenith VCR not duplicated on the new remote. If these functions are models built after 1988. The remote control must be in the desired, the original remote control will have to be used. VCR mode to operate your VCR. MODE Used to select the VCR mode of operation. OFF/ON VCR Used to turn VCR ON or OFF. Lights when VCR mode of FLASHBK (Flashback) MENU,
ملخص المحتوى في الصفحة رقم 4
REMOTE CONTROL MODEL MBR3430 CABLE-TV OPERATIONS The following functions and operations apply to a Zenith The remote control supplied with your cable-TV decoder may cable-TV decoder. The remote control must be in the CABLE have keys not duplicated on the new remote. If these functions mode to operate your cable-TV decoder. are desired, the original remote control will have to be used. decoder. MODE Used to select the Cable mode of operation. OFF/ON Used to turn VCR ON or OFF. CABLE Lights when C
ملخص المحتوى في الصفحة رقم 5
REMOTE CONTROL MODEL PREPARATION FOR USE Batteries are provided with this remote, but you must install them before using the remote. INSTALLING BATTERIES When the effective operating range of your remote becomes After installing new batteries, the remote control will set itself noticeably shorter, replace the batteries with two high-quality, CABLE=30 1. alkaline, size AAA batteries. Zenith is not responsible for damage caused by battery If you are going to operate equipment that uses different
ملخص المحتوى في الصفحة رقم 6
REMOTE CONTROL MODEL MBR3430 PROGRAMMING BRAND CODES Press MODE repeatedly to select the desired TV, VCR or CABLE operating mode for the remote. Before using your new remote control, it must be programmed to recognize the brands of equipment it will be used to 2. Press LEARN for about 5 seconds until the MODE indicator lights for the selected TV, VCR or CABLE If you are using a Zenith VHS VCR or a Zenith mode of operation. cable-TV decoder, the remote has already been programmed 3. Enter the pro
ملخص المحتوى في الصفحة رقم 7
REMOTE CONTROL MODEL TV, VCR AND CABLE-TV OPERATING CODES Table 1. TV Codes by Brand Table 2. VCR Codes by Brand Table 3. Cable Decoder Codes by Brand TV Brand JCR Brand VCR Brand Code Code Code Name Code Cable Decoder Cable Decoder Brand Name Code Code Admiral 116 119 223 215 Admiral 121 121 202 214 Drake Satellite 312 315 Akai 104 130 2 18 214 Drake Satellite 330 329 103 NEC 104 22 1 227 305 335 AOC 104 NEC 119 214 210 33 1 Scientific Atlanta 316 Bell & 12 1 106 209 215 General Instrument 305
